[Group] YAMAHA RXZ

[sottdott]

aku pon tgl amk...hehe

 

kau amk kawasan mane?aku st22 sbelah pump shell..

[sottdott]

dkt ang mo kio lepak kt haji karim..

 

haji karim sbelah mane?aku rd ni blum pandai sgt..aku motor stakat gi kej je..klau klua ngan family jwb naik bus la..

[nosey]

haji karim sbelah mane?aku rd ni blum pandai sgt..aku motor stakat gi kej je..klau klua ngan family jwb naik bus la..

 

dkt ang mo kio avenue 10 tk silap aku bro..

btw, my bike start giving me problem just now when i wanted to go home from sengkang..when i kick to gear 1, my bike didnt move off and i can push my bike like it was in neutral..and when i push my bike, got this funny sound came from the clutch plate..is this because of my clutch plate has worn off?can help me someone..somemore i stay in bukit panjang..

[izz]

dkt ang mo kio lepak kt haji karim..

 

haji karim ok juga.... pape lepak sane k?

picit aku je

[nosey]

haji karim ok juga.... pape lepak sane k?

picit aku je

 

aku da amik number kau izz..klau nk lepak ke apa, aku tekan kau..for now aku da start naik public transport coz motor rosak..

[taufiqo]

RXZ noob here...

anybody selling sports rim?

pls text 84888 500

[nosey]

tank original braper blh dpt uh bros?btw, i read some past post about how to know whether your tank is original or not..i dont understand how to check the tank is ori or local..mind somebody explain it to me clearly how?

[JOKE_KYLAT]

Any 1 interested in buying rxz???

i'm selling mine which plate is fd****...(A.S.A.P)

price to be quote ( no low ballers pls as ive spend alot on the bike on the pic but i dun expect dat too much)

coe 31 aug 2011(renewable for 10 years)

selling cos getting a pass dwn bike by ma family members soon..

transfer fee and insurance bare by the buyer...

outlook(accessories) 9/10

seat have been trim, cut and its thorn now need to be chnge...

old coverset with modified kr tank cap to prevent oil overflow..

2t pump has been taken out which is now pre-mix

suspension makida bronze

brake disk and calliper tzm

engine casing and topblock high polish

meter local as to be known local meter the fuel meter always spoil so nid to be chnge if the buyer lazy to check petrol at the tank..(actualy i wanted to chnge but due to chnging of bike)

original sidestand,original mainstand,original catalyzer footrest,brake lever, clutch lever,original handle, base plate, pillion back bar and ballencer all chrome...

pipe original yamaha 3bs only used less than 6month...

will throw in an old chrome rxz pipe if can find ma old pipe(for those mly rxz rider called it pipe lemang)

tire viva(sotong)

spoke rim

inlook(engine) needs to be overhaul which cost only bout $400-$500sgd if be made at j.b

all are standard and no nid to be afraid by t.p cos nothing is illegal cos been through a 100% check by the t.p base b4 and its pass...

every problem and non problem has been said above honestly as dun wan any misunderstood in the future...

pm me here if interested or can msg(only) me at 83693617...

selling it a.s.a.p

Edited June 7, 2010 by JOKE_KYLAT

[JOKE_KYLAT]

tank original braper blh dpt uh bros?btw, i read some past post about how to know whether your tank is original or not..i dont understand how to check the tank is ori or local..mind somebody explain it to me clearly how?

 

original tank have lyke an extension metal piece on the tank hole to prevent oil overflow...

if u afraid of overflow petrol damaging ur paintwerk den u might as well get a new original tank, second hand tank which cost $40 at scrap yard if i'm not wrong or u can modd the tank cap to a tzm,kr or etc tank cap to prevent dat frm happening...

hope dat helps ya...

[Izammo]

Any 1 interested in buying rxz???

i'm selling mine which plate is fd****...(A.S.A.P)

price to be quote ( no low ballers pls as ive spend alot on the bike on the pic but i dun expect dat too much)

coe 31 aug 2011(renewable for 10 years)

selling cos getting a new bike soon..

transfer fee and insurance bare by the buyer...

outlook(accessories) 9/10

seat have been trim, cut and its thorn now need to be chnge...

old coverset with modified kr tank cap to prevent oil overflow..

2t pump has been taken out which is now pre-mix

suspension makida bronze

brake disk and calliper tzm

engine casing and topblock high polish

meter local as to be known local meter the fuel meter always spoil so nid to be chnge if the buyer lazy to check petrol at the tank..(actualy i wanted to chnge but due to chnging of bike)

original sidestand,original mainstand,original catalyzer footrest,brake lever, clutch lever,original handle, base plate, pillion back bar and ballencer all chrome...

pipe original yamaha 3bs only used less than 6month...

will throw in an old chrome rxz pipe if can find ma old pipe(for those mly rxz rider called it pipe lemang)

tire viva(sotong)

spoke rim

inlook(engine) needs to be overhaul which cost only bout $400-$500sgd if be made at j.b

all are standard and no nid to be afraid by t.p cos nothing is illegal cos been through a 100% check by the t.p base b4 and its pass...

every problem and non problem has been said above honestly as dun wan any misunderstood in the future...

pm me here if interested or can msg(only) me at 83693617...

selling it a.s.a.p

coverset cantik.

 

anyway mainstand ori how much together with welding, at which shop?

 

because last time my mainstand come out from the frame, i dono its dented, i went to this metal shop ask them weld back, the uncle never tell me its dented, once weld i ask him why my bike senget on mainstand, he say dented already. haiseh man. so sad.

[ijamhamizam]

ok bros..aku realy nid help..aku nk gi johor tuka rim and tyre aku..skg its stock and rim aku stop it,last warning..da mcm apek siak..aku planning to go jb at the end of the mth..sape2 bleh teman,aku realy appreciate it as aku tk familiar ngn sane..lau korg leh bwk aku gi kdai yg bgus,pun ok jgk..lau dpt discount atau harga murah,lagi bgusss..amcm??ok tk??

 

oh btw,its racing boy 17x1.85 dpan blkg

tyre tt900 90/80 dpan blkg..

[JOKE_KYLAT]

coverset cantik.

 

anyway mainstand ori how much together with welding, at which shop?

 

because last time my mainstand come out from the frame, i dono its dented, i went to this metal shop ask them weld back, the uncle never tell me its dented, once weld i ask him why my bike senget on mainstand, he say dented already. haiseh man. so sad.

 

thnks for the complement...

all ma bike is being done at j.b..(malaysia boleh) lol

about the mainstand or any accesories u can go scrapyard to find its cheaper but nid to find urself la mostly rusty and broken but for sure have a few...

u can chrome it after dat lyke me so its worth looking...

if i'm not wrng ma fren have a problem lyke urs and nid to down engine to avoid welding being hit at the engine and to make it as level as possible..

hope dat helps ya...

[wantongkol07]

ok bros..aku realy nid help..aku nk gi johor tuka rim and tyre aku..skg its stock and rim aku stop it,last warning..da mcm apek siak..aku planning to go jb at the end of the mth..sape2 bleh teman,aku realy appreciate it as aku tk familiar ngn sane..lau korg leh bwk aku gi kdai yg bgus,pun ok jgk..lau dpt discount atau harga murah,lagi bgusss..amcm??ok tk??

 

oh btw,its racing boy 17x1.85 dpan blkg

tyre tt900 90/80 dpan blkg..

 

kalau da beli rim baru, yg lama tolak aku k? hehe.

[boi_s]

ok bros..aku realy nid help..aku nk gi johor tuka rim and tyre aku..skg its stock and rim aku stop it,last warning..da mcm apek siak..aku planning to go jb at the end of the mth..sape2 bleh teman,aku realy appreciate it as aku tk familiar ngn sane..lau korg leh bwk aku gi kdai yg bgus,pun ok jgk..lau dpt discount atau harga murah,lagi bgusss..amcm??ok tk??

 

oh btw,its racing boy 17x1.85 dpan blkg

tyre tt900 90/80 dpan blkg..

 

last time i changed my rear rim, cost me RM 75(for the rim only). but i recommend if wanna change rims, go to shops that have the machine to take out and fit back the tyres to the rim, most shops do manual, end up your rim sure got scratches here and there. few days back went over, then saw this shop sell chrome sport rim, that if you want easy maintenance of chrome rims la kn. haha

[wantongkol07]

thnks for the complement...

all ma bike is being done at j.b..(malaysia boleh) lol

about the mainstand or any accesories u can go scrapyard to find its cheaper but nid to find urself la mostly rusty and broken but for sure have a few...

u can chrome it after dat lyke me so its worth looking...

if i'm not wrng ma fren have a problem lyke urs and nid to down engine to avoid welding being hit at the engine and to make it as level as possible..

hope dat helps ya...

 

moto jambuuuu giler. asal nak jual? simpan la. buat spare bike ke 2nd bike ke. rxz tau.

[Izammo]

i have this problem where, when i corner (left or right), my bike will sway from right to left and on and on, (note: when cornering), but will not sway when straight. this is especially scary during this rainy season.

 

certain problems i thought of.

 

bearings: but if bearings worn out, i can shake the tyre when on mainstand right? well my tyre is firm when i try to shake it.

 

disc brake dented: i didnt take it out, but slowly spin the wheel but it's straight.

 

anymore problems you guys can think of? best if with price if want to repair it.

 

as i am kind of busy this week to go check at bike shop.

[Barongan78]

i have this problem where, when i corner (left or right), my bike will sway from right to left and on and on, (note: when cornering), but will not sway when straight. this is especially scary during this rainy season.

 

certain problems i thought of.

 

bearings: but if bearings worn out, i can shake the tyre when on mainstand right? well my tyre is firm when i try to shake it.

 

disc brake dented: i didnt take it out, but slowly spin the wheel but it's straight.

 

anymore problems you guys can think of? best if with price if want to repair it.

 

as i am kind of busy this week to go check at bike shop.

 

hav u check ur tyre pressure?

somtimes lau lembik, time corner mmg rasa wobble...

[ijamhamizam]

kalau da beli rim baru, yg lama tolak aku k? hehe.

 

boleh bro...tpi tu pun lau kau dun mind..haha,,rim aku last warning siak..apek2 nye,da mcm kipas kt rumah aku seh bunga dier..

[ijamhamizam]

last time i changed my rear rim, cost me RM 75(for the rim only). but i recommend if wanna change rims, go to shops that have the machine to take out and fit back the tyres to the rim, most shops do manual, end up your rim sure got scratches here and there. few days back went over, then saw this shop sell chrome sport rim, that if you want easy maintenance of chrome rims la kn. haha

 

bro,wanna ask..if i bring $150 spore dollars to jb,to change my rims and tyres enough or not??

 

changing to racing boy sport rims 17x1.85 front and rear

dunlop tt900 17 90/80 front and rear..

[wantongkol07]

bro,wanna ask..if i bring $150 spore dollars to jb,to change my rims and tyres enough or not??

 

changing to racing boy sport rims 17x1.85 front and rear

dunlop tt900 17 90/80 front and rear..

 

should be enough uh. unless u go for branded nye. like did japan or excel japan. or u want mcm fancy2 like hub chrome and all.

[JOKE_KYLAT]

moto jambuuuu giler. asal nak jual? simpan la. buat spare bike ke 2nd bike ke. rxz tau.

 

thnks for the complement bro..

as stated above nk jual sal ada mtr yng nk di pass pt aku...

susah uh bro nk simpan 2 motor...

byk pkai duit uh nk byr dua2 road tax ngn insurance...

hdp aku kalau kaya tkpa jgk...lol...

[white_angel]

guys just trying mu luck to sell an FT plater rxz.

 

http://www.singaporebikes.com/forums/showthread.php?t=290885&highlight=plater

[boi_s]

bro,wanna ask..if i bring $150 spore dollars to jb,to change my rims and tyres enough or not??

 

changing to racing boy sport rims 17x1.85 front and rear

dunlop tt900 17 90/80 front and rear..

 

think will be enough. or just cukup2. just bring a bit extra in case terlebih. anything over there can change also. be sure to survey first.

[SlowButSteady Bro]

150 kalao tukar skrg mungkin dpt 390?Cukup lah tu Lor bapuk gua rasa 150 untuk dua rims,TT900 mungkin 120 boleh dpt 2,Nak gi malam besok tak ijamhamizam?Gua ingat pun nak tuka sprocket 38.Bulan depan kalau ade bajet nak tukar rim 17x1.85 gak,Pipie 3BS.Budget bwh RM400.btw sapa nak ikot gua?Gua tolak rim LC125 style 18inci ngan tayar tubeless VIVA 80/80 50 ketul jer..

[sottdott]

bros..tumpang tanye,motor aku klau naik slope berat..aku slalu pakai gear 2 tapi lately aku rasa mcm tak ade power mcm kuda semput..klau slope dia tinggi engine motor aku mcm nak mati jadi aku slope je pakai gear 1..dulu tak gitu..members aku ckp mungkin piston ring aku da longgar..btol ke atau ade benda2 lain yg rosak..