[Group] YAMAHA RXZ

[izz]

Thanks for the comment. Frankly speaking my bike jx done overhaul. B4 overhaul oso got the same problem. Once reaching 100km/h and above the engine like stressing. So berat ler when perah... Mayb spocket la.. Ape size recommended ah for spocket. As for my rim is racing boy 18". Got heard ppl say can get tyre 18" tubeless. Go some shop cannot get ler. Sumor I prefer Dunlop tt900, Batlex mahal ah. Byk travel nnt pocket koyak ah bro..

 

kalau koyak sgt viva suda...hehe

bawa kene hati2 especially raining, like me safe rider nvr play corner all tis...haha

[izz]

Guys,my engine area got problem. ram engine in neutral, can see bubbles, smoke coming out from my top engine. he. Went to 1st motor n the uncle say need to rethread 4 of the screw lobangs from inside the engine (im a big noob w engines so i dunno which 4 screws n which 4 lobangs). he said compression already off and that the interna threads are slowly giving way. he's gonna charge me $18 per screw. total $72 to repair. any way i can do this myself or is there a cheaper alternative? hope u bros can help cos im in budget mode this week, n gotta rerpair my bike asap before something major happens. pls help bros =(

 

kadng2 gasket da worn off....try ngok dulu,da buka aru tahu...

i kenna tis b4..

[izz]

Thanks for the comment. Frankly speaking my bike jx done overhaul. B4 overhaul oso got the same problem. Once reaching 100km/h and above the engine like stressing. So berat ler when perah... Mayb spocket la.. Ape size recommended ah for spocket. As for my rim is racing boy 18". Got heard ppl say can get tyre 18" tubeless. Go some shop cannot get ler. Sumor I prefer Dunlop tt900, Batlex mahal ah. Byk travel nnt pocket koyak ah bro..

 

kalau koyak like me

viva suda bro....cheap giler

hehe

tapi kene safe rider like me no corner rempit....

kene hati2 when raining

hehehe

[izz]

Hi everyone... Im new here.. Also riding RXZ, wanna to noe y my bike got problem to exceeds 100km/h and above. Is it bcs of my spocket (size 45). So mangkuk ler. Or isit my cab got problem w the setting.

Laz ting, where to get tubeless tyre 18" 70/90 or 80/80 in S'pore cz I lazy to go JB.

 

im new too.... need to learn more

my bike also gt problem exceeding 100km/h when maintain 100km/h bunyi kentot2, kadang2 mcm nk terkencit gitu...y ehk?

haha.... kadang2 carb aku terkencing lak tu...haiz

hahahaha

bored siol!!!!

[alep20]

tt9 17" tubeless, tapi kalau 18" tube aja. tak salah lar.

 

18 inch ade tubless,aku pena pkai

 

Spore road, 15f 38r or 16f 41r...

 

 

Sent from my iPhone using Tapatalk

 

16f46r is the best,dont believe,ask the japanese!

 

bro syam,tadi aku try pat tpe/sle 120kmh,rim size aku 17 tapi bunyi kuat jugak.is it cos piston size aku 0.5 thats why bising?the bigger the piston the more bising eh?thanks.

 

mat rempit in the making

 

Guys,my engine area got problem. ram engine in neutral, can see bubbles, smoke coming out from my top engine. he. Went to 1st motor n the uncle say need to rethread 4 of the screw lobangs from inside the engine (im a big noob w engines so i dunno which 4 screws n which 4 lobangs). he said compression already off and that the interna threads are slowly giving way. he's gonna charge me $18 per screw. total $72 to repair. any way i can do this myself or is there a cheaper alternative? hope u bros can help cos im in budget mode this week, n gotta rerpair my bike asap before something major happens. pls help bros =(

 

that apek wana use his screw to screw ur lobang,haha

 

kalau koyak sgt viva suda...hehe

bawa kene hati2 especially raining, like me safe rider nvr play corner all tis...haha

 

hmm,yela

 

im new too.... need to learn more

my bike also gt problem exceeding 200km/h when maintain 200km/h bunyi kentot2, kadang2 mcm nk terkencit gitu...y ehk?

haha.... kadang2 carb aku terkencing lak tu...haiz

hahahaha

bored siol!!!!

 

ni baru btol sikit

[izz]

18 inch ade tubless,aku pena pkai

 

 

 

16f46r is the best,dont believe,ask the japanese!

 

 

 

mat rempit in the making

 

 

 

that apek wana use his screw to screw ur lobang,haha

 

 

 

hmm,yela

 

 

 

ni baru btol sikit

 

kalau leh tu apek pon mahu servis rossi nye block blakang kasi season pakai dia nye piston besar...haha...cmfirm nyaring bunyi pipe kuar dari mulut valentino kemam....hehe

 

tu tk btol broo.....hehe

[Valentino Rosli]

kalau leh tu apek pon mahu servis rossi nye block blakang kasi season pakai dia nye piston besar...haha...cmfirm nyaring bunyi pipe kuar dari mulut valentino kemam....hehe

 

tu tk btol broo.....hehe

 

 

 

seriously, aku dah peng dgn word kemam. dah tak kelakar lagi.

 

lain kali aku tak layan terus.

[Valentino Rosli]

maybe if i go back to the jalan kayu shop that did my overhaul can like 'push blame' that they nvr screw block properly then let them do? cos its only been 1 mth plus since overhaul,now then see effect of the 'mistake'. idea baik?

[alep20]

seriously, aku dah peng dgn word kemam. dah tak kelakar lagi.

 

lain kali aku tak layan terus.

 

alamak bro,asl lu tension sgt de??

 

maybe if i go back to the jalan kayu shop that did my overhaul can like 'push blame' that they nvr screw block properly then let them do? cos its only been 1 mth plus since overhaul,now then see effect of the 'mistake'. idea baik?

 

good and bad idea,good bcos the shop might take the blame n rethread for u FOC,bad if the shop knows hoe to peng story,eg say ur bike old bike lah this kind of thing tend to happen lah blah blah blah...haha,ikut naseb ah bro

[Valentino Rosli]

alamak bro,asl lu tension sgt de??

 

 

 

good and bad idea,good bcos the shop might take the blame n rethread for u FOC,bad if the shop knows hoe to peng story,eg say ur bike old bike lah this kind of thing tend to happen lah blah blah blah...haha,ikut naseb ah bro

 

 

 

esok aku cuba try tanye tu uncle..org dier friendly..harap2 dier leh tlg ah. kalau tak take the blame pun kalau dier nk bikin at discount price pun aku ok. cuma kena try my luck. rugi tak try

[wantongkol07]

seriously, aku dah peng dgn word kemam. dah tak kelakar lagi.

 

lain kali aku tak layan terus.

 

hahaha. da la jangan kacau dier lagi la korang. aku da kacau dier kat fb, sini alep ngan izz kacau ape tak stress budak nie. kene dari man lagi. hahaha. lek k bro?

[ToShac86]

kalau koyak sgt viva suda...hehe

bawa kene hati2 especially raining, like me safe rider nvr play corner all tis...haha

 

aik? Viva tube type je kan? can use at sport rim ke? if no hal, sure I go do want.

[ToShac86]

18 inch ade tubless,aku pena pkai

 

 

 

16f46r is the best,dont believe,ask the japanese!

 

Confirm? 16f 46 r..

Ltr i check mine front.. cz rear 45 ler... laz time face tis same prob on my wave.. wrong sprocket size.. go up slope the speed drop, moving off from 1st to 3rd gear bobok.. Sumor laz gear prob to reach top speed... Don't know does my RXZ face the same prob..

[syamitomo]

Bro I beleive if the piston size standard. Everything standard still can run 140km/h. My bike problem sia, run 100km/h oso berat.

 

Its true tat a stock RXZ cn hit 140km/h max. Heck, my wife's old stock Z cn hit 160km/h. Senang2! No setting, no porting, no open airbox $hi+s and stuff...

 

Damn! Shld hav taken my wife's Z instead of sellin it off! XP

 

 

Sent from my iPhone using Tapatalk

[wantongkol07]

aik? Viva tube type je kan? can use at sport rim ke? if no hal, sure I go do want.

tak sala ade tubeless nye. viva sport agaknye.

18 inch ade tubless,aku pena pkai

 

 

 

16f46r is the best,dont believe,ask the japanese!

 

Confirm? 16f 46 r..

Ltr i check mine front.. cz rear 45 ler... laz time face tis same prob on my wave.. wrong sprocket size.. go up slope the speed drop, moving off from 1st to 3rd gear bobok.. Sumor laz gear prob to reach top speed... Don't know does my RXZ face the same prob..

 

haha. tat one standard sprocket la. try 15-39 or 16-39. i using 16-39. okay je.

[syamitomo]

Guys,my engine area got problem. ram engine in neutral, can see bubbles, smoke coming out from my top engine. he. Went to 1st motor n the uncle say need to rethread 4 of the screw lobangs from inside the engine (im a big noob w engines so i dunno which 4 screws n which 4 lobangs). he said compression already off and that the interna threads are slowly giving way. he's gonna charge me $18 per screw. total $72 to repair. any way i can do this myself or is there a cheaper alternative? hope u bros can help cos im in budget mode this week, n gotta rerpair my bike asap before something major happens. pls help bros =(

 

Ouh, u mean bubbles coming frm ur "block" area eh? U gotta noe whch area it's coming frm; top block head area or the block itself. Bubbles and smoke comin out means loose or worn off "tiang" thread. But to me, the prob shld b as simple as replacing the gaskets to a fresh new ones. Coz tis prob very rare to happen unless u everytime open up ur block or ram ur bike wif ur oversized piston. If it does, u will hav a hard time kick startin ur bike wen the engine is cold. And if u listen carefully, there'll be tis rattling sound coming frm ur block area...

 

 

Sent from my iPhone using Tapatalk

[ToShac86]

tak sala ade tubeless nye. viva sport agaknye.

 

alamak bro 1st time hear got viva sport tyre.. 18" cz I 1st time used 18" sport rim.. Can tellme where can get that tyre... If JB no need la.. Lazy to go there hahaha

[syamitomo]

Thank for the tip. ltr payday go change la, den c how the performance. Btw tt900gp made in japan ehk?

Usually i c tt900 made in thailand.

 

Ur welcome! Yup! U got tat rite, those wif "GP" behind are made in Jap. However, I only saw those 18" tyres comes in 90/90 only...

 

 

Sent from my iPhone using Tapatalk

[syamitomo]

im new too.... need to learn more

my bike also gt problem exceeding 100km/h when maintain 100km/h bunyi kentot2, kadang2 mcm nk terkencit gitu...y ehk?

haha.... kadang2 carb aku terkencing lak tu...haiz

hahahaha

bored siol!!!!

 

Alamak Izz! Moto kau sakit perut kot? Lol!!!

 

 

Sent from my iPhone using Tapatalk

[wantongkol07]

tak sala ade tubeless nye. viva sport agaknye.

 

alamak bro 1st time hear got viva sport tyre.. 18" cz I 1st time used 18" sport rim.. Can tellme where can get that tyre... If JB no need la.. Lazy to go there hahaha

unfortunately, get at jb. i think spore got sell but should be ex than jb uh. arnd $35-45 per pc?

[mazli]

Serious ke pe?

 

Dey wont bother SG bikers, dorang cuma kacau motor m'sia aje sal dey all suka project moptor singapore

[mazli]

And cn I just add sumthn to tis quote? U cn actually add a bit of bass to tis by openin up ur airbox fully. Bt some settings must be made to accomodate the bigger air intake ah...

 

 

Sent from my iPhone using Tapatalk

 

Salamz, yup Syamitomo says its true wen he says setting, he means d carb air jet needs to reset ok, its not bout jus open ur air intake cuz if ur setting is wrong u end up having piston seize

[mazli]

tak sala ade tubeless nye. viva sport agaknye.

 

unfortunately, get at jb. i think spore got sell but should be ex than jb uh. arnd $35-45 per pc?

 

Salamz Wan, confirm ke dah buat passporting tu eh

[John Guna]

Hey there bros thanks for replying to my questions! Any idea how much does a 8 stick 18'' inch racing boy sport rim is? 17'' inch excel chrome rims? Thanks! Kindly let me know the price with tyres and without tyres. And is it true that in SG you get new rims you give your old rims they reduce the price for you? And okok dont think i always ask questions only. I've got some really rare and interesting stuff for all our Z members

!

[John Guna]

Hey there bros thanks for replying to my questions! Any idea how much does a 8 stick 18'' inch racing boy sport rim is? 17'' inch excel chrome rims? Thanks! Kindly let me know the price with tyres and without tyres. And is it true that in SG you get new rims you give your old rims they reduce the price for you? And okok dont think i always ask questions only. I've got some really rare and interesting stuff for all our Z members

!