SBF Honda Forza250 Garage 2009

[QuietStorm]

Dunno about that really. It may not sit right.

Maybe you can just replace the jets & hoses?

 

actually its the float dat become loose... so the FC n performance will suffer abit... n hav to service the carb every 6mths...

[QuietStorm]

Last weekend, I finally decided to have my forza repainted.

It took me all night but I finally took off all the panels.

Aside from repainting, I'm having some chrome plating done on

certain parts both metal and plastic. I've chosen pearl satin white.

 

I'll post some pics as soon as its done.

 

 

waiting for ur pics!!! bangkok i'm not too sure thou... but seems like there r more cubs compare to scooters...

[bigcow]

actually its the float dat become loose... so the FC n performance will suffer abit... n hav to service the carb every 6mths...

 

float can come loose??? can't be change meh? for every bike's carb, every single part can be bought seperately to fix up. esp japanese bikes, have no prob.

[QuietStorm]

float can come loose??? can't be change meh? for every bike's carb, every single part can be bought seperately to fix up. esp japanese bikes, have no prob.

 

i also dunno leh... checked wif 3 bike shop all say the same thing... change carb... no spares to replace...

[QuietStorm]

u guys can check out this webby: http://www.showcase-tune.com

[bigcow]

i also dunno leh... checked wif 3 bike shop all say the same thing... change carb... no spares to replace...

 

wat brand model is your carb?

[QuietStorm]

wat brand model is your carb?

 

mine is the stock carb... OEM

[bigcow]

mine is the stock carb... OEM

 

there is a brand and model name on the carb itself.

[QuietStorm]

Thanks for speedy reply. I'll have to look elsewhere, I guess.

 

wat website do u usually go to source for ur parts?

[One Headlight]

Finally got her home from the paint shop after 2 weeks.

Took me about 3 hours to get the fairings and panels back on. Hahahaha...

Hope you like it.

 

http://img.photobucket.com/albums/v671/jim3553/My%20Forza/7a1cd3f2.jpg

 

http://img.photobucket.com/albums/v671/jim3553/My%20Forza/700eed78.jpg

 

http://img.photobucket.com/albums/v671/jim3553/My%20Forza/f46b6d26.jpg

[One Headlight]

I also added a riser to go with the new paint scheme.

 

http://img.photobucket.com/albums/v671/jim3553/My%20Forza/195e20d5.jpg

[QuietStorm]

I also added a riser to go with the new paint scheme.

 

http://img.photobucket.com/albums/v671/jim3553/My%20Forza/195e20d5.jpg

 

where did u get the handle bar from? how much? nice...

[Dick Steele]

Hey Quiet....

 

Need you help. Im off to Japan on Mar 11-16 & will be buying consumable parts for my Forza while im there.

 

Do you know whats the STOCK Roller Weights of our babies. Thinkin of buying extra sets aside from a Daytona Belt & Heavier duty rear shocks.

 

Aside from the Stock weights, i know they come in 2 different Grams, what combinations have you heard that would be a good combo for both acceleration & topend speed?? Cheers everyone...

[One Headlight]

The handlebars came with the scoot. But I know someone who makes

these handlebars or any design you want. Price depends on the style.

[QuietStorm]

Hey Quiet....

 

Need you help. Im off to Japan on Mar 11-16 & will be buying consumable parts for my Forza while im there.

 

Do you know whats the STOCK Roller Weights of our babies. Thinkin of buying extra sets aside from a Daytona Belt & Heavier duty rear shocks.

 

Aside from the Stock weights, i know they come in 2 different Grams, what combinations have you heard that would be a good combo for both acceleration & topend speed?? Cheers everyone...

 

stock roller weight for my bike is 3x 15g n 3 x 16g... so average is ard 15.5g.. so far my bike lack of pick up but top end still ok... can hit 125km/h easily... where will u be goin to get ur forza stuffs? best if they got a webby n we can buy online...

[firestorm_33]

saw a black forza this afternoon heading to vivo..

 

confirm not quietstorm forza..

 

wonder whose

 

that one is a regular at WM... there is also another red Forza who freq WM also.... you guys can exchange your pointers with them there...

 

you can get their contacts frm doc ponytail/....

[Dick Steele]

stock roller weight for my bike is 3x 15g n 3 x 16g... so average is ard 15.5g.. so far my bike lack of pick up but top end still ok... can hit 125km/h easily... where will u be goin to get ur forza stuffs? best if they got a webby n we can buy online...

 

Hey Quiet, Thankx...

 

I know a place in Tokyo where it block & blocks of MCs & MC Parts up in Eueno.

 

I was lookin at a Daytona Catalog & it says our Stock Roller are 31x3 & 21x3 but I cant verify if its these are the stock rollers that are in the Forza unless I literally take the side covers aparts which is a chore to do. Are the weights you mentioned the ones installed when you got it or you had changed them to that weights?

 

I actually have a BNew Kitacos weighing in at 25x3 & 15x3 but i havent installed them till I know these are a good combo. Dont like to take em aprt then install & apart again & do a trial & error situation. Would rather get a recommendation from other owners what combo works best for stop & go traffic as well a good (dont have to be excessive) top end without a bog down on the midrange which is a common headache when you dont have the right weight combination. I dont plan o race it, i plan to keep it stock with a Daytona Belt replacement & the roller combo.... Thankx again mate.

[One Headlight]

Finally installed a original GIVI backrest on my E20 monoblock topbox.

 

http://img.photobucket.com/albums/v671/jim3553/Post%20Pics/topcase3.jpg

[dreamwalk]

Hi,

 

i would like to enquire where can i get the aluminium floorboard and roughly how much it will cost? Appreciate any help i can get. thanks.

[QuietStorm]

Hey Quiet, Thankx...

 

I know a place in Tokyo where it block & blocks of MCs & MC Parts up in Eueno.

 

I was lookin at a Daytona Catalog & it says our Stock Roller are 31x3 & 21x3 but I cant verify if its these are the stock rollers that are in the Forza unless I literally take the side covers aparts which is a chore to do. Are the weights you mentioned the ones installed when you got it or you had changed them to that weights?

 

I actually have a BNew Kitacos weighing in at 25x3 & 15x3 but i havent installed them till I know these are a good combo. Dont like to take em aprt then install & apart again & do a trial & error situation. Would rather get a recommendation from other owners what combo works best for stop & go traffic as well a good (dont have to be excessive) top end without a bog down on the midrange which is a common headache when you dont have the right weight combination. I dont plan o race it, i plan to keep it stock with a Daytona Belt replacement & the roller combo.... Thankx again mate.

 

my mech did mention to me to use a heavier n lighter weights to 'enjoy' the pick up n top end... but really need to trial n error till u find the most satisfied combo... it doesn't mean dat watever weight i use on my bike will work for ur ride... diff bike has a little diff in setting... my mech changed the weights based on the original stock settings...

[QuietStorm]

Hi,

 

i would like to enquire where can i get the aluminium floorboard and roughly how much it will cost? Appreciate any help i can get. thanks.

 

Hi bro! u can check out Future scootering @ kallang ave industrial estate... tink goin for ard $50...

[dreamwalk]

thanks =) will go check them out

[QuietStorm]

thanks =) will go check them out

 

juz gotten ur ride? nv see u b4 leh...

[dreamwalk]

Im riding a honda shadow.

Just gotten an old foresight recently, planning to refurbish it.

[One Headlight]

Hi,

 

i would like to enquire where can i get the aluminium floorboard and roughly how much it will cost? Appreciate any help i can get. thanks.

 

The one installed in my forza costs about US$30.