Home of CBR600

[Prankster]

aiyah guys, need some help leh...

 

was washin my bike earlier, when i found that on my left side of my bike, near to the engine, there's 2 hose, both havin the siza of like 1cm diameter....

 

Wat are these hoses for? 1 of the hose still got a pointed plastic attached to it... Both the hoses were already detached from my bike... The 1 with the pointed plastic thing, i suspect it is detached from a hole i saw above the engine... I tried sticking it back in but it just wun attached fully...

 

My suspect is that both the hoses are somewhat there to drain excess coolant.... I just wanna double confirm and i wanna noe whether will i still be able to ride my bike? Coz i am thinkin of going to work tomolo and than bring my bike and the hoses to bikeshop during lunch...

 

Can anyone advise?

[Sn0w_MaN]

actually end can are all about the same. Most for sound and also the pick. Well i think someone in the forum is using scop end can only.

 

 

 

hi i am riding cbr600rr 08 model thinking to change the exaust encan to either arrow or leovince, but recenlty went to hkl and the saleman recommend me the scopion encan carcon firble just onli $850. just to ask isit gd to take this scopion exaust? if not which exaust should i take for my cbr 600 arrow or leovince which is better. Thank you

[LIMAHTING83]

ok thanks for your advise.

[hafizhakimi]

yup...u see mi b4?

 

im e mcd rider der.. red wave.. red shades..

[Chaoz]

good afternoon all~

[ahduck]

gd afternoon chaoz never add cheryl into ur siggy peek?

[Chaoz]

gd afternoon chaoz never add cheryl into ur siggy peek?

 

good morning.. not yet leh.. i haven bring her out to take nice pics yet.. btw are u friends with cheryl in facebook?

Edited January 21, 2010 by Chaoz

[Sn0w_MaN]

good morning guys....

 

anyone have feedback on changing stock headlight to bright white light like H1 bulb or H4

btw i just realise that our high beam is actually to switch on another side of our head light only (i know i am slow) because 2b &2a always got 2 different like mah...

[Chaoz]

good morning guys....

 

anyone have feedback on changing stock headlight to bright white light like H1 bulb or H4

btw i just realise that our high beam is actually to switch on another side of our head light only (i know i am slow) because 2b &2a always got 2 different like mah...

 

ever considered HID?

[Sn0w_MaN]

ya or even those HID version... i know forum alot of ppl is selling... but i my old bike try on alot of full bulb that melt my header.... wat is ur feedback like

[Chaoz]

ya or even those HID version... i know forum alot of ppl is selling... but i my old bike try on alot of full bulb that melt my header.... wat is ur feedback like

 

so far i haven heard of any of my friends having issues with HID that were installed properly.. I am also considering installing HID for my normal headlight..

[ahduck]

good morning.. not yet leh.. i haven bring her out to take nice pics yet.. btw are u friends with cheryl in facebook?

 

accepted..

 

good morning guys....

 

anyone have feedback on changing stock headlight to bright white light like H1 bulb or H4

btw i just realise that our high beam is actually to switch on another side of our head light only (i know i am slow) because 2b &2a always got 2 different like mah...

 

is H7 for both L/H beams.

I'm using Philips Diamond Vision on both L/H beams so far so good no melts & very bright @ NSH. good enough for me after i adjust both beams light throw.

 

so far i haven heard of any of my friends having issues with HID that were installed properly.. I am also considering installing HID for my normal headlight..

 

hid no problem on brightness only got problem with lta:angel:

[Sn0w_MaN]

TGIF for all rider... it's a rainy friday pls take care....

 

my bike come out white smoke liao but only on very cold weather... other days like after rain my bike dont come out white smoke. I let it warm up until 50 degree still got smoke leh... sian...

[Prankster]

I think i ever ask regardin tis matter.... It doesn't matter....

 

Its just cold....

[Sn0w_MaN]

prank- i know u ask before i also think is cold weather case normal time it doesnt happen

[Prankster]

Yep, so dun worry so much....

[colacin]

Sorry, folks, no weather in Singapore is ever 'very cold' for a bike.

[LIMAHTING83]

hi guy just to check can 05 model arrow end can fix on 08 model ?

[hafizhakimi]

bros n sis.. i wan 2 ask.. have u heard e master pump kit from equipment extreme? my mech recommended it wen iask 4 the brembo ones.. he said y pay mre 4 e same thing n same quality.. so b4 i make a move.. i need some help here.. ah duck or anyone else willing to share a thought or 2?

[colacin]

I've never heard of them and from the ads I've seen on the forum, they aren't that much cheaper. There is a reason that most racers, when allowed by the rules, switch to Brembo. I can't say these MCs are poor quality, but the quality of Brembo *is* known, and personally I wouldn't trust something like my brakes to something unknown when coming to a corner at high speed.

 

At a minimum try to find someone else who has this installed on a similar bike - putting them on a small bike and having them work isn't adequate proof.

 

My 2c - go to Ah Boy and see if he has any Brembo RCS left.

[ahduck]

like wat colacin said above they look good but dun come cheap. i would rather top up more $ for a brembo.

[Sn0w_MaN]

i agree top up for a RCS

[Bloodrun]

hmm.. i dun think can the arrow from 05 can fix the new model of the cbr, coz the angle is different.

[Sn0w_MaN]

bloodrun- nope u can fix on that... usually cbr model goes like this... it will be able to fix on the bike model 1 yr before or maybe after. Which mean u riding a 08 model u can buy pipe or 07 or maybe 09.

[Chaoz]

good morning cbr people =)