Speed-enquiry

[bluevtec1]

sori everybody juz a newbie would like to clear some doubt

 

isit ok to speed at 90 along slip roads to expressways or have to enter the expressway then we can hit 90?

[bluevtec1]

sori everybody juz a newbie would like to clear some doubt

 

isit ok to speed at 90 along slip roads to expressways or have to enter the expressway then we can hit 90?

 

anybody can clear my doubt?

[liuj0008]

think no such thing as can or cannot. Depend on road condition also.

[bluevtec1]

its the slip road from fort road going towards aye.n 6 plus in the evening.No tp will station there at tis time rite?

[liuj0008]

dun worry lah, if they think u reckless or what most prob they will chase after u. Next time relax ride lah..when u enter expressway dun go so fast, make sure traffic is clear before entering. And off course pls check the blind spot, save me couple of time. Get caught by tp or what not a concern, think u shd be concern bout ur own safety more.. ride safe

[bluevtec1]

How about mobile speed cameras set up?Never c b4 at tis kind of place rite?

sori for asking so many stupid question cos juz started biking n too paranoid.

[Guest Eason]

dun worry.....

[Wildswans]

Technically, slip roads are 50-60km/hr speed limit

[ghost04]

i think can cos u need tat stretch to pick up speed to merge into the highway. don be like some cars who slow down then merge. damn frustrating.

[SMR]

Slip roads entering expressway are for you to pick up speed so that you'll reach the speed limit e.g. 90km/h as soon as you hit the expressway.

For slip roads exiting expressway, you have gotta slow down to the speed limit as shown on the road side.

[bluevtec1]

thank you everybody for answering my question.Happy riding.

Cheers!

[bluevtec1]

thank you everybody for answering my question.Happy riding.

Cheers!

 

Technically, slip roads are 50-60km/hr speed limit

 

i know expressways entering slip roads are 50 coz hv to slow down.But slip roads entering expressways i confused le.Hope wat u all said is true.Hv to increase speed to merge highway therefore no restriction of speed below the limit of expressway..

 

So low chance of getting caught?N i juz found out tat part of the expressway is 80 n not 90.

[bluevtec1]

i know expressways entering slip roads are 50 coz hv to slow down.But slip roads entering expressways i confused le.Hope wat u all said is true.Hv to increase speed to merge highway therefore no restriction of speed below the limit of expressway..

 

So low chance of getting caught?N i juz found out tat part of the expressway is 80 n not 90.

 

Nobody heard of mobile speed cams along slip roads entering expressway or kana caught b4 in tis roads rite?

[LordDevil]

those are called accelerating lane, need to match the eway speed. normally tp wouldnt station there.

[Giles-Damien]

sori everybody juz a newbie would like to clear some doubt

 

isit ok to speed at 90 along slip roads to expressways or have to enter the expressway then we can hit 90?

 

the speed limit for the accelerating n deaccelerating lane is 50 km/h... so u cant go beyond that... but by left u can...

[contrarian]

The acceleration lane is for you to increase your speed so that you enter the expressway at the appropriate speed. It should have been covered in driving theory.

 

Beware that some of these entrances to the expressway lead to a merging lane or a give-way lane.

[bike4me]

You can do anything u like but dont get caught

[archenemy]

dont rule out the possibility of TP camping at the chevron between the slip road joining the expressway & the expressway itself...seen it many times before...

[sgr1]

When entering an expressway the slip road is for accelerating and matching expressway speeds to be able to join traffic safely..note that most slip roads like this have give way lines to traffic on the expressway..