[Group] Kawasaki Versys

[Fusionjaz]

this type of hydraulic clutch system is diff leh.. u got go see the website?

its not like those stock class 2 bikes with hydraulic clutch leh...

the cable have a piston at the end and it jus work like how cable clutch works. it pull the lever at the engine there thats all.. it not using oil to engage and disengage the clutch plates

 

I saw the pic and I have seen the real thing on my friend's fazer 6. I tested it and buay pai, the only issue is the S eleven.

[Guest B_E_N]

I saw the pic and I have seen the real thing on my friend's fazer 6. I tested it and buay pai, the only issue is the S eleven.

 

i not telling to u la.. -_-

[Fusionjaz]

O my bad….

[Fusionjaz]

Care to share what are the wind shields you guys are using…? ( with pics is the best )

[SilverBullet]

Have anyone adjusted their Versys TPS(Main Throttle Sensor)?

[Fusionjaz]

Have anyone adjusted their Versys TPS(Main Throttle Sensor)?

 

what is the adjustment for…? Care to share

[Guest B_E_N]

I am using ermax windshield from motoworld

Price good and its tall enough still can get some wind so wun feel so hot...

Price is 160 depend how well u know them

Givi windshield are also not bad

[xyoshiki]

I using Skidmarx Windshield + Laminar lip for my Versys 2007.

[michael_25]

Have anyone adjusted their Versys TPS(Main Throttle Sensor)?

 

Done it,recommended! feel the smoothness may hurt the mileage abit.

[Fusionjaz]

Are you guys aware of this piece of news…?

 

Accident

[Guest B_E_N]

Done it,recommended! feel the smoothness may hurt the mileage abit.

 

wat actually does it do?

 

Are you guys aware of this piece of news…?

 

Accident

 

ya heard and read about it liao..

many friends post about it le

[SilverBullet]

Done it,recommended! feel the smoothness may hurt the mileage abit.

 

Did the adjustment today, highly recommend it too:thumb:...agreed it may hurt the avg fuel consumption abit if over adjusted.

Will monitor mileage and see if it's worth it.

 

After adjustment upon engine start can hear the engine running at a more smoother note and power feels improved from low to mid.

Feedback says the engine will easily rev above 9k now...need to check this out next visit up north.

 

Ben

Factory have set it to the lowest possible setting to pass tough emmission laws and also give good avg consumption.

Adjusting the main throttle sensor will change the Electrical Voltage signal to the ECU to change the amount of fuel to inject and at the same time it will also advance the timing of the ignition.

The slight accelerating stumble from idle is smoothen out with this adjustment.

End result is a smoother better performance Versys.

 

Some may have to adjust the Sub Throttle Sensor for engine RPM for cold start or adjust the idle screw when fully warm up to within specification after the Main Throttle Sensor have been adjusted.

 

Adjustment is simple and easy...don't like, it can reverse back easily.

[Guest B_E_N]

Did the adjustment today, highly recommend it too:thumb:...agreed it may hurt the avg fuel consumption abit if over adjusted.

Will monitor mileage and see if it's worth it.

 

After adjustment upon engine start can hear the engine running at a more smoother note and power feels improved from low to mid.

Feedback says the engine will easily rev above 9k now...need to check this out next visit up north.

 

Ben

Factory have set it to the lowest possible setting to pass tough emmission laws and also give good avg consumption.

Adjusting the main throttle sensor will change the Electrical Voltage signal to the ECU to change the amount of fuel to inject and at the same time it will also advance the timing of the ignition.

The slight accelerating stumble from idle is smoothen out with this adjustment.

End result is a smoother better performance Versys.

 

Some may have to adjust the Sub Throttle Sensor for engine RPM for cold start or adjust the idle screw when fully warm up to within specification after the Main Throttle Sensor have been adjusted.

 

Adjustment is simple and easy...don't like, it can reverse back easily.

 

sound like some good adjustment to do...

any1 can help me?

know nothing about tis leh..

[Fusionjaz]

Me also, where to adjust…?

[SilverBullet]

DIY...i can help and guide if Ben or Fusionjazz interested.

Simple tools needed...happy to share.

 

This Sat or Sun meet at Parkway Parade @1045am to 1100am...15 min window.

Let me noe if u guys are keen.

[Fusionjaz]

DIY...i can help and guide if Ben or Fusionjazz interested.

Simple tools needed...happy to share.

 

This Sat or Sun meet at Parkway Parade @1045am to 1100am...15 min window.

Let me noe if u guys are keen.

 

Hmm.. I am ok with Sunday. Let's see Ben ok or not

[Sn3ll]

@Fusion - if u have not slp, u can SMS to tweat the tps. I hv torx t25

 

btw Versysian I have some item to sell

 

http://www.singaporebikes.com/forums/showthread.php/341950-WTS-item-for-Versys(-rack-box-sparkplug)?highlight=

 

Alan

[Sn3ll]

Versysian - any one have oil filter wrench to borrow?

 

Scorpion exos should cost $850-950 range hope this helps.

 

Thanks inadvance

btw this fri want to organiZe an outing ?An outing just to let our Versys to meet each other

Alan

[SilverBullet]

Got the filter wrench to help u undo or tighten e oil filter.

Unable to loan if "borrow" is what u meant.

 

Let me noe so will bring along during the meetup...cheers

[Sn3ll]

Oil change during meet up? Wow. that will really attract attention then

 

but thanks for the offer

[Guest B_E_N]

DIY...i can help and guide if Ben or Fusionjazz interested.

Simple tools needed...happy to share.

 

This Sat or Sun meet at Parkway Parade @1045am to 1100am...15 min window.

Let me noe if u guys are keen.

 

Hmm.. I am ok with Sunday. Let's see Ben ok or not

 

ok i am on for it... cya there...

 

Versysian - any one have oil filter wrench to borrow?

 

Scorpion exos should cost $850-950 range hope this helps.

 

Thanks inadvance

btw this fri want to organiZe an outing ?An outing just to let our Versys to meet each other

Alan

 

scorpion titanium is coming in stock in about 2 weeks time..

i contacted motovation for quote and they quote me $700 with installation..

i will say its quite worth it..

 

btw i jus bought a 2nd hand scorpion exhaust.. feel not bad.. not so much hold back feeling..

those wanna try can meet me on sunday and feel feel abit ^^

 

btw the motovation guy say only have titanium this shippment no SS..

anyway the price diff is about $70 b4 GST..

i tink titanium de better la, SS too hot liao..

[Guest B_E_N]

do update here again if fri is meeting.. locally lim kopi also good.. haha chit chat abit

[Sn3ll]

$700 goody price! Yeah tit .$70 diff grab it! Ben btw which area u stay?

[Fusionjaz]

$700 goody price! Yeah tit .$70 diff grab it! Ben btw which area u stay?

Let me guess…. Ben may be staying near Paya Lebar area….

[Fusionjaz]

Last night I have the seat raise mod install with the assistance of Sn3ll. The ride from CCK to changi in the morning was comfortable. When I brake my butt will not slide forward too much causing my pants to stretch alot which in return feeling very uncomfortable.