[Group] SBF WaveRider

[anonymouser]

Does wave need to warm up..? N sometimes when i start it jst dies off.. Need open choke den ok.. Is it normal or prob..? I seldom ride it.. Could it be the reason..

 

All bike needs to warm up. Probably your timing needs to be adjusted if your bike dies off easily.

[anonymouser]

Anyone can recommend a good tyre for dry, wet, cornering, thick and cheap? Thinking of Bridgestone Battlax but now quite expensive. Any recommendations? what about dunlop tt900 made in Thai? My confidence on the road is Battlax made in Japan...

[squarebox]

Anyone can recommend a good tyre for dry, wet, cornering, thick and cheap? Thinking of Bridgestone Battlax but now quite expensive. Any recommendations? what about dunlop tt900 made in Thai? My confidence on the road is Battlax made in Japan...

 

Stick to Battlax.

Tire is the only thing between the bike and the road, so get the best regards of cost.

Most important question.

Is the money you so called save better that the injuries you experience from an accident?

 

I used Battlax all the way.

[anonymouser]

Stick to Battlax.

Tire is the only thing between the bike and the road, so get the best regards of cost.

Most important question.

Is the money you so called save better that the injuries you experience from an accident?

 

I used Battlax all the way.

 

True. Will buy Battlax then. The only tyre I trust. Bigger tyre the better for me. Anyone knows how much and where can I get a center basket in plastic made? Not interested in the grids one.

[DooM11]

Does wave need to warm up..? N sometimes when i start it jst dies off.. Need open choke den ok.. Is it normal or prob..? I seldom ride it.. Could it be the reason..

 

Maybe you can try to tune ur carb higher abit on idling .. Or maybe you can try to on your throttle a little when warming up .. Best is to let it warm up for 3 min b4 gg off

[DooM11]

True. Will buy Battlax then. The only tyre I trust. Bigger tyre the better for me. Anyone knows how much and where can I get a center basket in plastic made? Not interested in the grids one.

 

Ah boy ...

[geraki]

Any comments??

[geraki]

FBB 07 wave s stock bike for 3.5k .. Thought of getting it.. Good price?? Comments please

 

Any comments ?

[Tyrian]

FBB plate when your COE is ending?

[tong]

Any comments ?

 

Consider fair price.. But if it was me.. I wont buy.. Cos few years ago 3.5k almost can get first hand ald.. Anyway tts few years ago..

[geraki]

Consider fair price.. But if it was me.. I wont buy.. Cos few years ago 3.5k almost can get first hand ald.. Anyway tts few years ago..

Now Coe so high .. New bike can hit 5-6k.. Coe till 2017..Thanks for comment

[geraki]

FBB plate when your COE is ending?

 

Coe till 2017

[Tyrian]

Coe till 2017

 

3.5k i feel it's fine. each year depreciate about $500

[geraki]

3.5k i feel it's fine. each year depreciate about $500

Ok thanks ... No matter what I still will get the bike... Lol

[jB]

FBB 07 wave s stock bike for 3.5k .. Thought of getting it.. Good price?? Comments please

quite high for machine price. wave depre shouldn't be so high IMHO. Maybe because I full cash push out all my bikes thats why my depre low. I pushed out two FBB 07 July wave s on the same day for 2+k only so what do you think

Does wave need to warm up..? N sometimes when i start it jst dies off.. Need open choke den ok.. Is it normal or prob..? I seldom ride it.. Could it be the reason..

for my bikes I slowly ride out, keeping it below 2k rpm to aid warming up and not damage anything. Do the same for car but our cars have auto chokes just like our cl2 bikes.

 

Anyone can recommend a good tyre for dry, wet, cornering, thick and cheap? Thinking of Bridgestone Battlax but now quite expensive. Any recommendations? what about dunlop tt900 made in Thai? My confidence on the road is Battlax made in Japan...

tt900 not bad even if made in thai. the price of the thai you can change twice of the one made in japan. Btw I tried to find the jap made one but can't

Stick to Battlax.

Tire is the only thing between the bike and the road, so get the best regards of cost.

Most important question.

Is the money you so called save better that the injuries you experience from an accident?

 

I used Battlax all the way.

how much for the battlax?

[anonymouser]

quite high for machine price. wave depre shouldn't be so high IMHO. Maybe because I full cash push out all my bikes thats why my depre low. I pushed out two FBB 07 July wave s on the same day for 2+k only so what do you think

 

for my bikes I slowly ride out, keeping it below 2k rpm to aid warming up and not damage anything. Do the same for car but our cars have auto chokes just like our cl2 bikes.

 

 

tt900 not bad even if made in thai. the price of the thai you can change twice of the one made in japan. Btw I tried to find the jap made one but can't

 

how much for the battlax?

 

I think between 180 to 190 bucks? Anyway, my Wave-125S can go until 140KM till petrol dry out. Is this a normal mileage consumption?

[Moonzir]

Stick to Battlax.

Tire is the only thing between the bike and the road, so get the best regards of cost.

Most important question.

Is the money you so called save better that the injuries you experience from an accident?

 

I used Battlax all the way.

 

 

 

 

 

Bro try Maxxis diamond or Shinko Evo.

[nx.]

Is spark plugs the only thing that affects your start up? After servicing until now, can say everyday i always took quite awhile to start up my bike. Last time this doesn't happen that often.. any idea why?

[Tyrian]

if you did not start your engine for quite a while, say 24 hours, it is normal for wave to get started and maintain in getting the engine running

 

1) you can use choke to assist you.

2) increase your idling rpm

[nx.]

if you did not start your engine for quite a while, say 24 hours, it is normal for wave to get started and maintain in getting the engine running

 

1) you can use choke to assist you.

2) increase your idling rpm

 

Yeah but before servicing.. some mornings i just have to start and let it warm up by itself.. but now every morning and going home always have to take quite awhile.. and the only difference from previous servicing was only eo.. don't think lousy eo makes a difference in it right?

[shazwanmchaggis]

heyy peeps.

any of y'all ever did overhaul in sg before?..

i think my bike really needs an overhaul, the piston ring and etc bit noisy alr..

Appreciate your recommendations.

[shazwanmchaggis]

and..

anyway how much is a wave's fork and yss suspension in SG?.

Thanks!

[I 3 Stix]

how much is a wave's fork and yss suspension in SG?

 

i think it might go by the hundred in SG. Maybe $120-$160 range?

why you wanna change fork? why not just change oil? i did that to mine and it's much better than stock now.

[I 3 Stix]

Is spark plugs the only thing that affects your start up? After servicing until now, can say everyday i always took quite awhile to start up my bike. Last time this doesn't happen that often.. any idea why?

 

hmmm, correct me if i'm wrong guys.. but it takes more than just the spark plug to get the engine going.. it's your settings and condition of your piston,valves to combust the fuel/air/spark properly.. maybe it's your engine condition bro? ever tried to full service?

[I 3 Stix]

some mornings i just have to start and let it warm up by itself..

 

NX, i think better if you let it warm up for like 3-5mins before riding every morning as the engine is cold. Bike is more healthy that way.