CBR600 F4i/F4/F3/RR Riders

[Speedpass]

Originally posted by hockie69@Apr 11 2006, 03:51 PM

tim sum?....kekekeke...tat time bring rockford to jb eat tim sum...not bad..24hr 1......

When u wan to go ?

 

I need to apply a permit to leave SG leh .

[hockie69]

since friday is a hoilday.why not do it on thue nite? maybe ard 11pm+ ? treat it as supper trip lor.

 

chinese tim sum shop.(that side got two quite ok ones) can park bike right infront & consider quite ok neighourhood.

[ellamcoy]

Originally posted by Flaky_Boi@Apr 11 2006, 02:05 AM

So its from Ricky, Yeah~ thanx for the welcome!

 

As for the suspension thingy, I can source for ya. Shldnt be a prob. But dun tink i able to get HKS. Check it out for ya.

 

 

Sure~ Will giv u a ring when i free....

Hey bro, as and when u are free!

 

Thanks for ya help bro! Hope to see ya on the next outing.... can't wait to see ya new ride! Rumour said that your ride leaves flames on the paths of ya tyres

[ellamcoy]

Originally posted by hockie69@Apr 11 2006, 01:44 PM

work out your sum 1st.

 

after adding in all those necessory expends like installment,petrol,rdtax,insurance & maintance.

 

then decide which range of product u want to purchase.

 

RS250 has high insurance & petrol/2T cost.something which u may have to factor in b4 buying.

 

G4? no idea whats that.

Pardon my ignorance, i think i came across an article here... some donkey months backs...duno which thread. It did state in figures RS250 does burn loads of fuel, one of the second highest in the 2-wheel world, not to mention 2T.

 

First cash burner is awarded to MV Agusta, burns more than a 1.5 car

Good to see nice to touch, once engine start, drain your blood. Think it cost a dollar of petrol idling away at a red light controlled junction.

[ellamcoy]

Track Dayz anyone?

 

Good Friday morning, time n venue to be confirm. A guided track tour by pro. First 3 lap he lead, after that it on ya own. Cost involves: buy a pack of pop corn for mi

[ellamcoy]

 

My white donkey went home with her new owner liao.

 

Posted for sales on March 14... today only 11 April, less than a month....

gone liao...forever gone liao...

 

Hope the new owner can join us in the future outing.

[emmitsu]

Originally posted by ellamcoy@Apr 11 2006, 10:47 PM

 

My white donkey went home with her new owner liao.

 

Posted for sales on March 14... today only 11 April, less than a month....

gone liao...forever gone liao...

 

Hope the new owner can join us in the future outing.

Dun cry la, good news for you la.

 

Now can concentrate on your new spider liao.

[emmitsu]

Originally posted by ellamcoy@Apr 11 2006, 10:47 PM

 

My white donkey went home with her new owner liao.

 

Posted for sales on March 14... today only 11 April, less than a month....

gone liao...forever gone liao...

 

Hope the new owner can join us in the future outing.

You should tell the new owner that the selling pakage come with free club membership ma(Honda F3,4,4i and RR club).

[hockie69]

Originally posted by ellamcoy@Apr 11 2006, 10:04 PM

Pardon my ignorance, i think i came across an article here... some donkey months backs...duno which thread. It did state in figures RS250 does burn loads of fuel, one of the second highest in the 2-wheel world, not to mention 2T.

2 stoke 250 cc bike aint for the fear wallet type.

 

had a PGM 250 back then.....petrol & 2T is a killer(somemore that time just out to work..$$ where got enough 1).

 

somemore mod away the 2T tank & use direct mixing.

 

all ANDY LAU's fault...after watching his HK movies....lolz

[Flaky_Boi]

Originally posted by ellamcoy@Apr 11 2006, 09:56 PM

Rumour said that your ride leaves flames on the paths of ya tyres

Rumour

 

Dats nt rumour lo.. I kana sabo lehx...

[warren84]

(>>>>>>>how rockford still keen on the moriwaki racing footrest..think letting go at 300...

he dun have camera but i think u go motoworld can see the model..quite nice..)

 

got fren selling racing fairing carbon firbre...paintwork need to touch up..single head light...400...

 

anyone plan to get spocket for 525 chain.. front 16 rear 47 and a brand new unopen afram spocket all going for 150.. only the front 16/rear47 is used.(still good but not afram)... quite good deal.fren selling..sms mi 91502864...think price can neg a bit only..>

 

>>>>>>>>>emmitsu, never see at ohlins selling at 200 leh..next time got such gd stuff call mi~~haha..tealeaf selling his penske but i no burget..

 

anyone change/tried denso iradium or ngk iradium...ngk can get 17.5 per plug at motoworld.. denso like all selling fro 20..anyone know where cheaper..and which size compatable????

[ellamcoy]

Originally posted by emmitsu@Apr 11 2006, 11:04 PM

Dun cry la, good news for you la.

 

Now can concentrate on your new spider liao.

Still cannot get over it lah, can't believe i signed her away just like that...she is one good faithful donkey whom serves it master well...haizz...heart sunk went i went down to warm up the engine...forgot it is sold already.

 

Still i prefer the comfort of the donkey. Getting use to spidy, muz more agressive in high revs....this spidy dun pull itself up the wall...but into the walls or thurs the walls....and sometimes it bites

 

Had already pass the new owner an application form to this club.

[ellamcoy]

Originally posted by hockie69@Apr 12 2006, 01:12 AM

2 stoke 250 cc bike aint for the fear wallet type.

 

had a PGM 250 back then.....petrol & 2T is a killer(somemore that time just out to work..$$ where got enough 1).

 

somemore mod away the 2T tank & use direct mixing.

 

all ANDY LAU's fault...after watching his HK movies....lolz

Hahaha, direct mixing! juz like the KTM, but again it is raw in power. People are going for its response and pickup rather than top speed. But the wear and tear is simply too high...there is a condition in the 2-stroker which happens so commonly that there is actually a term for it... piston jam

 

During school days, joined those stupid NPCC thingy, went for one of the outing at the traffic police mobile squad HQ. Remember the orientation officers mentioned dunno how many percentage of the accident was caused by the same movie...hahaha...singapore is a small unexciting city whereby people only watch tv after work...and some handful choose to mimick their idol.

 

The local accident rate might be lower if back than, the director had put Andy on a TZR Thinking back again, if the movie does not boost the sales of PGM and HRC, there will not be sufficent fund in the R&D dept for our EFI,DSFI and even HISS. Good n bad lah

[ellamcoy]

Originally posted by Flaky_Boi@Apr 12 2006, 01:47 AM

Rumour

 

Dats nt rumour lo.. I kana sabo lehx...

Hahaha...bro u very humble! Like ya style

[ellamcoy]

GOOD FRIDAY TRACKS DAYZ ANYONE ?

Rejuvenate Your Soul Again!

 

Likely to be rolling the engine in the morning.

Venue 1 : Side road immediately after JB check point(from woodland)

Venue 2 : At PG track

 

Time to be confirm. As date crawl nearer.

 

Special Guest: Mr X. Will lead 3-5 laps for those interested to pin point the entry point of the turns. After that you will be on ya own. Just some friendly pointer, no hardcore training. He will have his own kinda of enjoyment after the 5 laps

 

Pls do add ya nick to the list. *Subjective to weather condition.

 

S/N........Nick.........Contact........Possibility

1).......ellamcoy.....91012850..........90%

2) next entry

[hockie69]

Originally posted by ellamcoy@Apr 12 2006, 11:28 AM

The local accident rate might be lower if back than, the director had put Andy on a TZR Thinking back again, if the movie does not boost the sales of PGM and HRC, there will not be sufficent fund in the R&D dept for our EFI,DSFI and even HISS. Good n bad lah

wahaha...andy lau in a TZR? may as well as him to ride a RX-K...lolz

 

those were the days of RXz,LC,pwr-valve,TZR.....having a PGM/TZM 250...is a instant hit with chicks & elite of de pack.

 

but i still wanting for Honda to install HESS on 600RR leh...currently only 1k RR has it stock....and a GPR steer damper at$700...haiz...progress bonus also not so much.

[ellamcoy]

Hahaha... ya lor those were the good old dayz for PGM's tua pay kong pipes, dry clutches(my other museum bike) and high pitch ear piercing after market end can.

 

GPR damper cost 700 bucks? Serious meh?

 

A Bitubo nitrogen gas compression type only cost abt 700+, think with 12 or 15 clicks adjustable damping.

 

SCOTTS also worth considering, though they say is for off road use, but i think if it can be use in off rd application, it definately be more lasting for street use. Damage at 800+, but certainly more dashing looking and better in security features.

[yctradingsg]

wa just saw a rs250 rw plate......tmd.....tempting leh....kns.....

[hockie69]

Originally posted by ellamcoy@Apr 12 2006, 12:42 PM

GPR damper cost 700 bucks? Serious meh?

 

A Bitubo nitrogen gas compression type only cost abt 700+, think with 12 or 15 clicks adjustable damping.

 

SCOTTS also worth considering, though they say is for off road use, but i think if it can be use in off rd application, it definately be more lasting for street use. Damage at 800+, but certainly more dashing looking and better in security features.

bitubo design is like ohlins

GPR design is like scotts.

 

end of day...i prefer the scott way of fixing on the steer cone & instand numbered adjustment.instead of remember "click"....something itchy hand will play with de "click"....

[ellamcoy]

Originally posted by hockie69@Apr 12 2006, 01:54 PM

bitubo design is like ohlins

GPR design is like scotts.

 

end of day...i prefer the scott way of fixing on the steer cone & instand numbered adjustment.instead of remember "click"....something itchy hand will play with de "click"....

Yeah, agreed on that itchy hand things... last 2weeks saw someone selling a used Scotts for 500 bucks...now bo liao...good stuffs go fast....

[hockie69]

wow...got good staff?

 

anyway...while searching for a used steer damper...i notice that the "damper" is cheaper then the "mounting kit".

 

i can find used ohlins for US$100....but the new mounting kit cost US$125.which drive the cost up to S$370.

[Rockford]

................................................................................................................

[Rockford]

Guys. see u at PG.

[ellamcoy]

Originally posted by hockie69@Apr 12 2006, 05:31 PM

wow...got good staff?

 

anyway...while searching for a used steer damper...i notice that the "damper" is cheaper then the "mounting kit".

 

i can find used ohlins for US$100....but the new mounting kit cost US$125.which drive the cost up to S$370.

Ya lor i saw that marketing sh*t coming too while searching for one last time!

 

For example : Usually people want to change bike(maybe R1 to K5), the owner wants to keep the damper, but the bracket is not reuseable on the new ride. If the owner were to buy juz a K5 bracket solely, the cost of the bracket will be just a few hundred dollars lesser than a brand new complete set!

 

They monopolized the bracket via this method. Any lay man can see that the bloody piece of aluminium bracket does not worth 400 or maybe 500 bucks. Thus forcing people to purchase new damper set everytime they change a ride.

 

Ofcourse they can't deter user from selling to each other with the same model. They had pumped in money in the R&D to study further in to the tensile strength of the material. A term UTS, Ultimate Tensile Stress, is a SI unit used to determine the amount of stress a material can withstand before it break or crack.

 

And usually, if u had noticed, the bracket comes in cleanly milled aluminium with the cool shiny looks(one of the lowest UTS material). They uses the softest material available, once there is a hair line crack, it is not safe to use anymore.

 

Not to mention some brand, u think those holes in between the bracket looks cool and is made to save weight, think again. Those holes are cleverly design by material engineer, precisionly caculated to have a limited life span, juz in time for their new rang of product on the shelves.

 

In reality, the damper last longer than the bracket. If the damper leak, u will say the product lousy. But if the bracket gives way, the manufacturer say u are a rough user. The process repeats itself.

[ellamcoy]

Originally posted by Rockford@Apr 12 2006, 08:18 PM

Guys. see u at PG.

Rockford wat timeu going? Maybe we can meet first? Steady bo?