Yamaha FAZER

[ah_vic811605199361]

this is becos its over heated... the brain tells the bike not to start if not the ecu gets fried... u must reach ur temperature abt 108 to 110 degerees??

some small technics-- when the fan turns on @ 101 degrees maintain throttle at RPM 2 to 2.5 allowing the coolant to run through the engine bringing the temp down. =) hope this helps.

 

selling my love....

http://www.singaporebikes.com/forums/showthread.php/318931-Tour-ready-fz1s-2007-blue-with-oem-panniers-or-oem-top-rack.(non-urgent-sales)

[kumon1979]

this is becos its over heated... the brain tells the bike not to start if not the ecu gets fried... u must reach ur temperature abt 108 to 110 degerees??

some small technics-- when the fan turns on @ 101 degrees maintain throttle at RPM 2 to 2.5 allowing the coolant to run through the engine bringing the temp down. =) hope this helps.

 

selling my love....

http://www.singaporebikes.com/forums/showthread.php/318931-Tour-ready-fz1s-2007-blue-with-oem-panniers-or-oem-top-rack.(non-urgent-sales)

 

Thanks for the reply but my case is not due to overheat. This happen when i off and leave it there more than an hour and it will have slight difficulities in starting.

[Yatz86]

Thanks for the reply but my case is not due to overheat. This happen when i off and leave it there more than an hour and it will have slight difficulities in starting.

 

bro check the condition ure batt, rectifier,startor motor and coil asap...

 

happen to me once cause all the above mentioned spoilt at one go...at that time, it was a 1 year old bike:faint:

[cbr_400_cbr]

Magnetic coil?

[cbr_400_cbr]

And starter carbon also

[kumon1979]

bro check the condition ure batt, rectifier,startor motor and coil asap...

 

happen to me once cause all the above mentioned spoilt at one go...at that time, it was a 1 year old bike:faint:

 

Thanks bro, mine is less than 1 week bike.

[asiavage]

done and pumped according to the requirement spec slightly better but still handle buzzing at slower speed..guess i ve to go down to rectify with my mechanic.. my tires are 90% new at time of taking the bike out of the shop..n it is diablo strada..

 

guys, problem already been resolved.. something to share with u guys.it was actually my front tyre which was installed wrongly by the previous owner's motorshop..the rotation direction of the tyre was placed in anti clockwise and because of that my front wobble.now changed both tyres to new BT023.

THANKS

[Yatz86]

guys, problem already been resolved.. something to share with u guys.it was actually my front tyre which was installed wrongly by the previous owner's motorshop..the rotation direction of the tyre was placed in anti clockwise and because of that my front wobble.now changed both tyres to new BT023.

THANKS

 

hm...how to check tyre was placed in anti clockwise direction?

[dragonforce]

hm...how to check tyre was placed in anti clockwise direction?

 

your tyre sidewall have indications on which direction its supposed to roll..

[Yatz86]

your tyre sidewall have indications on which direction its supposed to roll..

 

ouh...noted with thanks!...didnt know that..hehe:)

[MonoWorld]

Thanks bro, mine is less than 1 week bike.

Mine have the same problem. Cold is ok, hot is hard to start. Engine sounded like it would start and normally thumb naturally let go from the ignition switch, but engine died instead.

What I did was to leave my thumb at the switch about 0.5 second longer.

Consulted with HL but mech said the problem will go away as time goes by..

Edited April 2, 2011 by MonoWorld

[kumon1979]

Mine have the same problem. Cold is ok, hot is hard to start. Engine sounded like it would start and normally thumb naturally let go from the ignition switch, but engine died instead.

What I did was to leave my thumb at the switch about 0.5 second longer.

Consulted with HL but mech said the problem will go away as time goes by..

 

I see... Thanks for the info... I manage to have a get it start at 2nd try alrdy. What I did was to turn the non free play point and hold it there to make like RPM to be 1k.

[dragonforce]

ouh...noted with thanks!...didnt know that..hehe:)

 

np.. We are all learning everyday..

[kumon1979]

Does anyone know what is the Idling RPM for FZ-1S 2010 model?

[superspeed123]

Does anyone know what is the Idling RPM for FZ-1S 2010 model?

 

Owner manual states between 1100 to 1300rpm..

[kumon1979]

Owner manual states between 1100 to 1300rpm..

 

Thanks... Mine is slighty below 1000rpm.

 

Is it because of low idling that give the bike difficulties to start?

[seb9312]

hi bros, is a xj6 or a fz8 better?

[dragonforce]

hi bros, is a xj6 or a fz8 better?

 

Depends on what you looking for in a bike..

[normanlai]

hi

 

i'm looking for fazer gsr 400 gsr600. At least 3 yrs to ride, with top box and sides. If you are letting go please PM me.

 

Thanks!

[ahweng86]

sian sian sian...... my mirrior become loose. any idea where can tighten or lobang to buy cheap side mirrior? FZ1 09. i asked HL $120 one piece only .

[Fredd]

sian sian sian...... my mirrior become loose. any idea where can tighten or lobang to buy cheap side mirrior? FZ1 09. i asked HL $120 one piece only .

 

Hw abt aftermarket mirrors?

[ahweng86]

not a bad idea. can fold also right? haha

[fr_square]

Hi all.. I'm looking for Fz1 09-10 models. Any shops to recommend??

[ahweng86]

Hi all.. I'm looking for Fz1 09-10 models. Any shops to recommend??

can try bike production or ASP

[fr_square]

can try bike production or ASP

 

I'm looking for 2nd hand actually..

Thanks for the info. Tried asking ASP Changi Rd, no 2nd hand.