mod spec 2 rear tail

[ryunosue]

anyone know of what to buy to mod the rear of a spec 2?

my previous owner had modded the tail until the rear tail light has got no tail-light cover.he mod the rear tail board there lor.when i open sit,the pillion there that part de board,he mod it.

any idea how can i make it back to the original spec 2 rear?

need bros help here.

[biting_point]

A picture says a thousand words..

[ryunosue]

ok.will be putting photos up late.hope bros here can help.thanks..

[ShiftingGears]

wanna see ley ur spec 2...btw join in the thread.. Where to get LED clear cover signal lights for s4? and how much..?

 

my spec2 signal lights too big and loose... but rear tail all standard...

 

thanks fellow spec2..

[ryunosue]

http://img.photobucket.com/albums/v421/ryunosue/DSC00476.jpg

http://img.photobucket.com/albums/v421/ryunosue/DSC00477.jpg

http://img.photobucket.com/albums/v421/ryunosue/DSC00478.jpg

 

bros,the red-inked part was the part that was modded by previous owner,sorry for the ugly and dirty photos,becos this bike is still at the workshop.intending to ask bro here if its possible to DIY back to original spec 2 rear.

[ryunosue]

picture 1 is the rear tail,need the rear tail light cover,but the picture 3,is the part when the seat is open,this piece of plastic,can be removed together with the rear tail light one.picture 2 is the below view of the removeable plastic.

[wenming]

help help on this pls..

[JuZ_FZ6]

The rear mudgurd has been taken out. He replaced with another bike's bottom mudguard. notice the flat brackets holding the mudguard at the last pic. you have to get a rear mudguard to replace, or find fibreglass molder to mold a replacement.

[Nicky Blink Blink Blink]

help help on this pls..

 

Bro, can PM me... where to chrome all the engine casing, swing arm etc...

[TitanicLexus]

picture 1 is the rear tail,need the rear tail light cover,but the picture 3,is the part when the seat is open,this piece of plastic,can be removed together with the rear tail light one.picture 2 is the below view of the removeable plastic.

 

bro, if u din tell, i tot is NSR SP 150 tail..... i cant imaging tis is S4 rear tail and light... :giddy:

 

In my opinion, the way u need to do is buy the rear tail light, tail board, rear mudguard to modify back will do... Juz like those (included me) modify the old version S4 tail to the new spec3 tail lidat, same theory.

 

If i am you,and looking for budgeted repair, then i suggest you find the 2nd hand item from those bro who change to spec3 tail, but... the paintwork maybe is not so good for the condition liao, but at least u can have the original spec 2 rear tail liao lor.

 

If you think to spend an amount of $xxx to mod back to spec 2 rear tail, then i suggest u change direct to spec3 tail better lor. The price includes spec 3 rear tail light, rear tail board, rear mudguard n labour cost as well... if you can DIY to find those item, maybe ard $250-$300 or lower than. I feel no pt spend and mod back to old model rear tail liao lor, why not go direct to new model rear tail?

 

Thanks, juz my 2cents

[ryunosue]

how much is the cost if i choose not to diy/

[TitanicLexus]

how much is the cost if i choose not to diy/

 

I din mine at Motorworld cost ard $400 - $450 three mth ago... now i tink more cheaper liao bah?

 

If you tink to DIY on spec3 tail, here you can take alook and enquiry those bro who DIY one, I got no idea how much? Hope it help. Thks.

http://www.singaporebikes.com/forums/showthread.php?t=201358

[ryunosue]

thanks.hopefully some more bros can read this thread and guide me on diy-ing a tail

[ZzGaNgStErzZ]

I din mine at Motorworld cost ard $400 - $450 three mth ago... now i tink more cheaper liao bah?

 

If you tink to DIY on spec3 tail, here you can take alook and enquiry those bro who DIY one, I got no idea how much? Hope it help. Thks.

http://www.singaporebikes.com/forums/showthread.php?t=201358

 

nv see dio ppl DIY tailboard lei.

[TitanicLexus]

thanks.hopefully some more bros can read this thread and guide me on diy-ing a tail

 

nv see dio ppl DIY tailboard lei.

 

I think your misunderstood wat i mean liao.... Wat i was mentioned is those DIY is buy their tailboard, taillight, and mudguard or rear mudguard eliminator themselves from the accessories shop, such as ah boy, blah blah etc. After bring all this to bikeshop, e.g Motorworld to do the mod spec3 tail. In this way, u only need to pay for the labour cost plus other screw or wat wat other items. In this way, it will probably save more than they quote u lor, perhaps u can get all the sources from those who DIY b4 bros.

[BioMoDiFIed]

Ok from what i see from the picture, even the compartment to store things is gone..if your wanna restore back to its original glory, i think it'll take a lotta cash to do the job..another way that i could suggest is to find parts at scrapyards...then bring it to a motoshop for the assembly..i mite be a lil cheaper..

 

But think of it like this, are u going to use the bike for a long run? Lets say more then 2yrs? if yes, i tink its worth the effort, if not, i wud suggest leave it be..u cud use the money for ur nex bikt...just my opinion...

[wenming]

Nicky Blink Blink Blink bro i DIY wan..haha..=)