SBF Tmax Cafe

[ghost04]

i mean 2011 model....anyway how is the box n rack attached? my bikshop say need to drill 3 holes on the tail plate for the rack...

 

Bro you mean ur Max is registered in 2011 but brand new la

 

Sent from my GT-N7000 using Tapatalk 2

[simeric]

seems i was not fated to ride a maxsym 400i.... stupid agent 3 days before collection then tell my bikeshop left maroon...

end up tmr i will be rolling out new 2011 tmax for 18.8k otr. insurance, iu, box all included...

looking forward to run in n meet up wit u guys!

its God in disguise bro....he wants u to get a Tmax. ...I''ve rode the maxsym for 5 mths. ..sold it and bought a 2nd 2012 Tmax 530 ...it's a much much more better choice. ...big big difference. ...

[simeric]

seems i was not fated to ride a maxsym 400i.... stupid agent 3 days before collection then tell my bikeshop left maroon...

end up tmr i will be rolling out new 2011 tmax for 18.8k otr. insurance, iu, box all included...

looking forward to run in n meet up wit u guys!

its God in disguise bro..........on the 7th Day He Created Tmax

Edited November 12, 2012 by simeric

[EvilGixxer]

i mean 2011 model....anyway how is the box n rack attached? my bikshop say need to drill 3 holes on the tail plate for the rack...

They'll remove the pillon handle bars and mount 4 legs to that, plus only one hole in the dead middle of the tail panel.

[duriandan]

seems i was not fated to ride a maxsym 400i.... stupid agent 3 days before collection then tell my bikeshop left maroon...

end up tmr i will be rolling out new 2011 tmax for 18.8k otr. insurance, iu, box all included...

looking forward to run in n meet up wit u guys!

 

Why did you choose the 2011 instead of the latest?

[duriandan]

They'll remove the pillon handle bars and mount 4 legs to that, plus only one hole in the dead middle of the tail panel.

 

Anyone using the Yamaha 51l box and rack for Tmax?

[duriandan]

seems i was not fated to ride a maxsym 400i.... stupid agent 3 days before collection then tell my bikeshop left maroon...

end up tmr i will be rolling out new 2011 tmax for 18.8k otr. insurance, iu, box all included...

looking forward to run in n meet up wit u guys!

 

That's a good price! Which shop did you go to?

[duriandan]

Hi bros , need some info on agv blade helmets. Where can I buy it from ? And any idea how much is it ?

Thank you guys in advance....

Eric....

 

Hi Eric, think you can get it here:

 

http://www.google.com/search?q=agv+blade+singapore+price&hl=en&safe=off&tbo=d&ei=mjifUOORJdHKrAeoqIHIBg&start=10&sa=N&biw=320&bih=417

 

Should be around $280:

 

http://www.singaporebikes.com/forums/showthread.php/347977-Brand-New-Helmet-AGV-Blade-200-(L-size)?

[duriandan]

its God in disguise bro....he wants u to get a Tmax. ...I''ve rode the maxsym for 5 mths. ..sold it and bought a 2nd 2012 Tmax 530 ...it's a much much more better choice. ...big big difference. ...

 

Which shop do you use for your Tmax servicing?

[EJ]

i mean 2011 model....anyway how is the box n rack attached? my bikshop say need to drill 3 holes on the tail plate for the rack...

 

OEM rack need to drill one hole in the tail piece plus both pillion grab rails removed. I chosed hepco and becker.. No need to drill any holes.

[ghost04]

cos there is a sale for 2011 machines...abt $4k cheaper than 2012 models....

i actually want the maxsym lor but agent screwed it all up...

 

Why did you choose the 2011 instead of the latest?

[duriandan]

cos there is a sale for 2011 machines...abt $4k cheaper than 2012 models....

i actually want the maxsym lor but agent screwed it all up...

 

Do you still prefer the Maxsym after getting your Tmax?

[duriandan]

yes, right glove compartment. with NOTHING to secure, as per what Ric78 says, for easier removing the iu out to allow the carpark sensor to detect(if there's a need to)

 

it's place on the right as most if not all the carpark IU detector r on the right. it's not logical to place on the left. but, u can still do so if u find left glove compartment easier for u.

 

so far, I went thru ERP countless times and nothing happens.

 

Hi guys, I'm reading the posts backwards to prepare myself as I plan to get a Tmax too, and was wondering about the IU.

 

If you place it in the right pocket, how much wire allowance do you have for taking it out if the carpark gantry has difficulty detecting it?

 

And does it fit in snugly, or do you use a cloth or some foam tape to keep it from hitting around inside while you're riding?

[duriandan]

for me, I dyno run-in. so just have to change all oil and oil filter after the dyno, den the bike is ready to fly. but I play safe, still maintain below 4k rpm for 1st 600mile.

 

Did anyone else do a dyno run in for your beloved Tmax too? My experience is that I've never been patient enough to do a proper run in, so a dyno run in might be the solution...

[EJ]

Hi guys, I'm reading the posts backwards to prepare myself as I plan to get a Tmax too, and was wondering about the IU.

 

If you place it in the right pocket, how much wire allowance do you have for taking it out if the carpark gantry has difficulty setecting it?

 

And does it fit in snugly, or do you use a cloth or some foam tape to keep it from hitting around inside while you're riding?

 

For my IU I placed it at the front of the bike, underneath the front cover. So far no issues on carpark gantry and erp gantry.

 

Downside is its a hassle to insert and remove cashcard. I just top it up and leave it inside. Each time I wash my bike I take out and check the balance.

[EJ]

Hi guys, I'm reading the posts backwards to prepare myself as I plan to get a Tmax too, and was wondering about the IU.

 

If you place it in the right pocket, how much wire allowance do you have for taking it out if the carpark gantry has difficulty setecting it?

 

And does it fit in snugly, or do you use a cloth or some foam tape to keep it from hitting around inside while you're riding?

 

For my IU I placed it at the front of the bike, underneath the front cover. So far no issues on carpark gantry and erp gantry.

 

Downside is its a hassle to insert and remove cashcard. I just top it up and leave it inside. Each time I wash my bike I take out and check the balance.

[duriandan]

For my IU I placed it at the front of the bike, underneath the front cover. So far no issues on carpark gantry and erp gantry.

 

Downside is its a hassle to insert and remove cashcard. I just top it up and leave it inside. Each time I wash my bike I take out and check the balance.

 

Wow, so everytime you have to top up one times big one!

[EJ]

Haha no la.. Since I bought the bike I top up until now still got value. Cos to my work place no erp gantry and my work place free parking. Orchard road very seldom I go there during peak hours..

[duriandan]

Haha no la.. Since I bought the bike I top up until now still got value. Cos to my work place no erp gantry and my work place free parking. Orchard road very seldom I go there during peak hours..

 

That's good! It's CBD for me, every day have to TI...TI three time to work, and another three times back, haha!

[kopvampp]

seems i was not fated to ride a maxsym 400i.... stupid agent 3 days before collection then tell my bikeshop left maroon...

end up tmr i will be rolling out new 2011 tmax for 18.8k otr. insurance, iu, box all included...

looking forward to run in n meet up wit u guys!

 

hi bro ghost...yup where u got the deal?

[liquidthots]

cos there is a sale for 2011 machines...abt $4k cheaper than 2012 models....

i actually want the maxsym lor but agent screwed it all up...

 

Hi guys ...based on what ghost04 shared....it seems that getting a new 2011 tmax seem to be a more attractive deal rather than getting a 2nd hand tmax from sellers in the forum.

 

However, I'm new to this scooter thingy and was wondering how much will the bike depreciate (i know its quite subjective) in say

1 year,

2 years,

3 years and

4 years......

 

It seems for the tmax the depreciation is quite high....

 

I love the looks of the bike and after hearing all the rave reviews......really wanna try... just the cost and potentil major loss when selling thats holding me back a little.......

 

Advice anyone?

[Mary55]

Ah Leong blackMax has the 8 Roller Polini Variator also lehhttp://www.rxor.info/01.jpghttp://www.rxor.info/22.jpghttp://www.rxor.info/8.jpghttp://www.rxor.info/03.jpg

http://www.rxor.info/23.jpg

[simeric]

Hi Eric, think you can get it here:

 

http://www.google.com/search?q=agv+blade+singapore+price&hl=en&safe=off&tbo=d&ei=mjifUOORJdHKrAeoqIHIBg&start=10&sa=N&biw=320&bih=417

 

Should be around $280:

 

http://www.singaporebikes.com/forums/showthread.php/347977-Brand-New-Helmet-AGV-Blade-200-(L-size)?

 

Hi duriandan , tks for the link and infos. ....cheers bro

[duriandan]

Hi duriandan , tks for the link and infos. ....cheers bro

 

No problem, cheers!

[duriandan]

~~~~~~~~~~