[Group] HONDA CG125

[sk70]

Bro xXxRatedxXx,

Dun say until like that lah.. Bro Tony is the senior member here, and I am the newest bird at the moment. So must consult him for his advice mah.. I only recently started riding less than 1.5 years ago after almost 10 years of layoff. This would be my first bike that I really want to mod. Me old man liao, got wife and kid, very boring life. So must look for some hobby mah, to keep life interesting.

[xXxRatedxXx]

Bro xXxRatedxXx,

Dun say until like that lah.. Bro Tony is the senior member here, and I am the newest bird at the moment. So must consult him for his advice mah.. I only recently started riding less than 1.5 years ago after almost 10 years of layoff. This would be my first bike that I really want to mod. Me old man liao, got wife and kid, very boring life. So must look for some hobby mah, to keep life interesting.

 

Wa lao so serious..... hahhaha.. no la i joking. Cos tony also very into hands on..

[sk70]

frame is not cg.

engine lookalike

you sure this is cg?

 

you need to change many thing for this.

 

need wide swingarm

wide triple clamp and fork

 

might as well get a TW.

 

Hello Tony,

 

From the website, the guy claimed that was a cg frame that has been chopped and mod. That is why I am not using that example as the basis for my mods, but rather use some of the features as reference for ideas... As you can guess, I am more of a chopper guy and I just sold my intruder 400. What I hope to achieve is to have a super lightweight custom that look like a chopper to ride and choppers look best with single seats.

 

http://www.knucklebusterinc.com/features/2008/08/06/small-displacement-choppers/

[ProFatSir]

hey guys i know this may look or sounds formal hahaha

 

Dear sk 70,

we are in the same boat.got wife,got children,nothing to do

what i can advise you is to change to aftermarket front fork using CG titans or maybe rx z

the front will be higher

rim remain @ 18"

 

lower the rear suspension

change to wider SW

change to 17"

do like the masked rider bike with a sissy bar behind

 

maybe after the national day and we had a meet up again as kemos and alan is riding to thailand.

[ProFatSir]

Bro xXxRatedxXx,

Dun say until like that lah.. Bro Tony is the senior member here, and I am the newest bird at the moment. So must consult him for his advice mah.. I only recently started riding less than 1.5 years ago after almost 10 years of layoff. This would be my first bike that I really want to mod. Me old man liao, got wife and kid, very boring life. So must look for some hobby mah, to keep life interesting.

 

 

i also new to this forum

just hoping to get to know more riding kaki....

the rx kaki are our kaki

we always will join each other for gathering.

 

Wa lao so serious..... hahhaha.. no la i joking. Cos tony also very into hands on..

 

got hands must use mah.....i only know how to use a tools dunno how to use a pen so bo bian lah...

[sk70]

hey guys i know this may look or sounds formal hahaha

 

Dear sk 70,

we are in the same boat.got wife,got children,nothing to do

what i can advise you is to change to aftermarket front fork using CG titans or maybe rx z

the front will be higher

rim remain @ 18"

 

lower the rear suspension

change to wider SW

change to 17"

do like the masked rider bike with a sissy bar behind

 

maybe after the national day and we had a meet up again as kemos and alan is riding to thailand.

 

I like some of your ideas a lot and will seriously look into it, espcially lowering the rear suspension. As for sissy bars, I think I will give it a miss as I feel it is not the kind of look that I am after(paiseh).

 

Pardon my ignorance, but what is SW?

[sk70]

http://zoomerboys.freeflux.net/files/images/blog/honda_solo.jpg

 

This is a nice bike that never make it to Singapore... New bike with old school looks.

By the way, anyone got any bikeshop that doing some fabrication works which involved some cutting and welding? I am looking to compare prices and gather feedback on the work quality and service as well. Thanks.

Edited July 22, 2009 by sk70

[Qoo]

guys..sibei excited.. i just changed my 2 seater to single seat.

 

i got the orginal CG 125 single seat leh! but too bad they dun have original back seat.. have to make...

[ProFatSir]

http://zoomerboys.freeflux.net/files/images/blog/honda_solo.jpg

 

This is a nice bike that never make it to Singapore... New bike with old school looks.

By the way, anyone got any bikeshop that doing some fabrication works which involved some cutting and welding? I am looking to compare prices and gather feedback on the work quality and service as well. Thanks.

 

too heavy mod wil not pass the inspection

[Qoo]

http://zoomerboys.freeflux.net/files/images/blog/honda_solo.jpg

 

This is a nice bike that never make it to Singapore... New bike with old school looks.

By the way, anyone got any bikeshop that doing some fabrication works which involved some cutting and welding? I am looking to compare prices and gather feedback on the work quality and service as well. Thanks.

 

hey SK70

 

If you do find a shop that does fabrication please let me know ok? i also wanna do my back seat. haha

[sk70]

too heavy mod wil not pass the inspection

 

I will keep taht in mind.

[sk70]

hey SK70

 

If you do find a shop that does fabrication please let me know ok? i also wanna do my back seat. haha

 

Roger that...

[Qoo]

eh tony i heard got this shop at rowell road. their mechanic quite good.. opposite united.

 

u know abt this?

[Qoo]

Roger that...

 

Hey SK70

 

please come and join us for the next meet up.

 

i think must meet up once before they go thailand... argh feel like going also!

[xXxRatedxXx]

Seng Kwang metal works at ang mo kio industrial autopoint does bike welding in stuff... Or so i heard.

[sk70]

Hey SK70

 

please come and join us for the next meet up.

 

i think must meet up once before they go thailand... argh feel like going also!

 

Sounds good... Let me noe ahead of time...

[sk70]

Seng Kwang metal works at ang mo kio industrial autopoint does bike welding in stuff... Or so i heard.

 

Thanks for the info... Spoke to the boss... will go down this sat mrg to speak to them. They are quite near my home, as I stay in ang mo kio.

Edited July 22, 2009 by sk70

[ProFatSir]

Thanks for the info... Spoke to the boss... will go down this sat mrg to speak to them. They are quite near my home, as I stay in ang mo kio.

 

price is a bit steep.do have a budget control

[sk70]

price is a bit steep.do have a budget control

 

Thanks for the reminder... I am only wondering what is the best course of action? Go to a bike shop like First Motor and let them take care of everything or go to this Seng Kwang metal works instead. The first method is the most convenient method, while the alternative has money saving potential. Chances are I would go for the 1st method to save me the headache.

[ProFatSir]

Thanks for the reminder... I am only wondering what is the best course of action? Go to a bike shop like First Motor and let them take care of everything or go to this Seng Kwang metal works instead. The first method is the most convenient method, while the alternative has money saving potential. Chances are I would go for the 1st method to save me the headache.

 

is your bike in running condition?

settle the engine 1st

than outlook.

need to overhaul

go to 123 trading opp aunty sticker shop

[sk70]

is your bike in running condition?

settle the engine 1st

than outlook.

need to overhaul

go to 123 trading opp aunty sticker shop

 

I think some of you guys know the bike. I bought it from stONebOy..... And yes, it is in running condition. I dare say that the condition is very respectable.

[ProFatSir]

I think some of you guys know the bike. I bought it from stONebOy..... And yes, it is in running condition. I dare say that the condition is very respectable.

 

enjoy modding......

[sk70]

enjoy modding......

 

Thanks.

[Qoo]

oh.. you buy from stoneboy ah?

 

That means he will no longer join us for meet ups

[sk70]

oh.. you buy from stoneboy ah?

 

That means he will no longer join us for meet ups

 

Don't worry, I am sure he will still join us so long you are ok with it.