Yamaha TZM 150 Riders

[nocturnized]

Hi just new here.. i was wondering what's the best sprocket setup for TZM150 ? Suggestions anyone ??

[hohosaint]

"]wats the name of the shop??

 

Autocycle Centre Pte Ltd

1070 Serangoon Road Singapore 328177

Tel: 62912515

Find: Ah Pui (Fat) / Ah Poh

 

I encourage you to compare price before proceeding on purchase.

[hohosaint]

Hi just new here.. i was wondering what's the best sprocket setup for TZM150 ? Suggestions anyone ??

 

Front 38=>Top Speed increase by around 10km-+ but no pick up

Front 42=> Distance

Front 48=> Pick up increase visibly but Top Speed reduce by 10km-+

[hohosaint]

TZM is a very gd bike~ High resale value summore~

 

Ya true. But never sell or buy from motortiams. It's way damn costly. Furthermore, kinda impossible to find trustable and honest sales representative.

 

The nightmare still haunting about my bike was bought at the cost of around 10K+-.

[-tRuSt-]

 

Ya true. But never sell or buy from motortiams. It's way damn costly. Furthermore, kinda impossible to find trustable and honest sales representative.

 

The nightmare still haunting about my bike was bought at the cost of around 10K+-.

u mean u bought ur tzm at 10k+...??!!

[magic]

tzm is a good bike, big tank, taller than sp and kips

 

looks cooler if spray on-paint work, good pickup , powerful, alof of mod in m'sia, my friend currently riding one, but think he might be selling.

 

the fuel consumption is quite high since it perform at high rev.. does not gives good milleage over time, might feel the pinch after months of riding.

[hohosaint]

"]u mean u bought ur tzm at 10k+...??!!

 

Ya lor... KNN kanna carrot cake la... No choice. When the very first time attained my 2B. Just grab when my Aprilia gave tons of problem. Very fastrauted.

 

COI 9K-+ plus downpayment 1.5K and get a screw-up third party. I'm kinda of desperate at that time.

[Guest H@|Z]

Can any tell mi where 2 get the rear hugger of TZM???

Mani thx in adv...........

=þ

[-tRuSt-]

 

Ya lor... KNN kanna carrot cake la... No choice. When the very first time attained my 2B. Just grab when my Aprilia gave tons of problem. Very fastrauted.

 

COI 9K-+ plus downpayment 1.5K and get a screw-up third party. I'm kinda of desperate at that time.

haiz...poor u...

[hohosaint]

Can any tell mi where 2 get the rear hugger of TZM???

Mani thx in adv...........

=þ

 

Look at the quoted thread.

 

Autocycle.

[StingRhea]

tzm is a good bike, big tank, taller than sp and kips

 

looks cooler if spray on-paint work, good pickup , powerful, alof of mod in m'sia, my friend currently riding one, but think he might be selling.

 

the fuel consumption is quite high since it perform at high rev.. does not gives good milleage over time, might feel the pinch after months of riding.

 

how much?

[Terrible One]

...............................

[-tRuSt-]

u mean the undertray etc....???

[hohosaint]

He meant those like RS replica type. More sharper than the RS type. I only can find those like Aprilia Ant Tail.

[StingRhea]

i can only find aprilia tail... and its possible to put with some mods...

[hohosaint]

i can only find aprilia tail... and its possible to put with some mods...

 

You need to do some customisation. Re-modify the existing parts to fit your requirement or tail to make. Quite costly. But very unique. Do it in JB.

[nocturnized]

 

Quite reasonable.

 

It should be S$15.00~S$20.00.

 

1) U sure it's that amount ? Heard one CDI would cost around $300 .. ?? What's the difference between the 'Thai type CDI' and the 'other types CDI' u can get ?

2) Any diff. after changing one ?

3) Any other part changes that need to be made after changing one ?

4) Where can it be purchased ?

[StingRhea]

That's why~ I wonder so cheap~ My life depends on the CDI, i ride the bike, not the bike riding me~ I saw one TZM at dexing at $5.5k~ With respray~

[hohosaint]

 

1) U sure it's that amount ? Heard one CDI would cost around $300 .. ?? What's the difference between the 'Thai type CDI' and the 'other types CDI' u can get ?

2) Any diff. after changing one ?

3) Any other part changes that need to be made after changing one ?

4) Where can it be purchased ?

 

CDI is to remove the powercut limit and unfortunately, I don't see any differences between a original CDI and aftermarket CDI.

 

Damn him... he requote me as 55.00 original TZM racing CDI and that is the only last one. Original factory cost around 100~200 plus. Remember to keep the original with you. You can call 62730369 to enquire. The motortiam is known as "Sourthern Motor".

 

Like I mentioned. If you're those like-to-race type. Modify the below said.

1) Block (Original) (Quite costly)

2) Carburetor (Original)

3) Chamber (Original)

4) Retune (Must be good)

5) Optional racing piston.

[hohosaint]

That's why~ I wonder so cheap~ My life depends on the CDI, i ride the bike, not the bike riding me~ I saw one TZM at dexing at $5.5k~ With respray~

 

Till now after changing to a after market CDI from thailand (Original Racing). Wonderfully, my CDI had not fried and least, still have a backup of original with me.

[StingRhea]

yah~ =)

[nocturnized]

 

CDI is to remove the powercut limit and unfortunately, I don't see any differences between a original CDI and aftermarket CDI.

 

Damn him... he requote me as 55.00 original TZM racing CDI and that is the only last one. Original factory cost around 100~200 plus. Remember to keep the original with you. You can call 62730369 to enquire. The motortiam is known as "Sourthern Motor".

 

Like I mentioned. If you're those like-to-race type. Modify the below said.

1) Block (Original) (Quite costly)

2) Carburetor (Original)

3) Chamber (Original)

4) Retune (Must be good)

5) Optional racing piston.

 

$55 bucks ? A friend of mine got one for $150 *i think* for the TZM racing CDI. Since he installed it, his piston seized twice !! He had since changed back to his original. Above mentioned (Original) as not in stock/OEM ones or what ? sori la, quite blur on this one... hehe

[StingRhea]

I think all changed settings gotta work hand in hand~

Like change pipe got to change carb setting all that~

[Terrible One]

my frend was telling me dat using a WR2 carb would increase the perfomence..anyone tried??ex owner took off the air filter so I'm getting a K&N to replace the hollow airbox..still can't do much on my bike cos haven't done servicing yet..cut my seat toady and it feels sooooo good now...my pipe has been operated b4..tho my mech says it's good and fast..I wanna try get a set of originals...wonder how much it would cost..wat tire size are u guys running??and stingrhea..u decided wat bike u getting already??

[StingRhea]

wr2 carb, wr2 head~ ported tzm block, racing cdi, chamber pipe~