Yamaha TZM 150 Riders

[faisaladilah]

Any good rebuilding shops to recommend?

 

Since I'm going for a full overhaul, fairing, frame repairs and paintwork because of accident, might as well do the full package. Fixed it so it would be road worthy but mostly using 2nd hand parts, suck thumb, needed bike to go to A to B for the time being, now want to make it look as good as new. Heart pain.

 

Went to Un1que and they said it was roughly 1.5-1.7k, JB i read is around 900.

 

I seen some rebuilding at yishun workshop before but never ask how much they do it for..

[entyla]

I any brand can..as long can last for more than 6mths..i need to change rear tyre..budget 100..

 

at sungei kadot...BT39F 110/70 selling at $105 and 90/80 at $100

[KerplunkZ]

at sungei kadot...BT39F 110/70 selling at $105 and 90/80 at $100

 

hmmm , at abboy motor $215 for BT90 Rear And BT39 Front. Include workmanship.

[nosey]

anyshops to recommend for full servicing?btw, my engine noisy uh..why eh?or issit normal?

[faisaladilah]

anyshops to recommend for full servicing?btw, my engine noisy uh..why eh?or issit normal?

 

when my valve not working my bike noisy..not sure what exactly your prob..need to hear where the sound come from..

[faisaladilah]

hmmm , at abboy motor $215 for BT90 Rear And BT39 Front. Include workmanship.

 

at sungei kadot...BT39F 110/70 selling at $105 and 90/80 at $100

 

Thanx you..BT90 boleh masuk ke TZM?

 

Kalau BT90 aja brapa agak agak eh?

 

What the diff BT39F and BT39S?

[KerplunkZ]

Bt90 boleh pakai belakang aje. 110/70/17.Depan takde. Depan kena pakai bt39

[Movitar]

http://www.singaporebikes.com/forums/showthread.php/318379-wTs-tZm-tZr-rXz-StuffS

 

all stuffs dekitted.

[entyla]

Bt90 boleh pakai belakang aje. 110/70/17.Depan takde. Depan kena pakai bt39

BT090 is damn grippy when put at the rear..but then it lasted me only for 4 months..so now i use back BT39 cause it last a little longer..hehe:)

[entyla]

Hey bros...just wanna ask...anyone know how much does a top block costs?1st hand and 2nd hand also can...thanks in advance..ride safe everyone:)

[Jehuty]

I seen some rebuilding at yishun workshop before but never ask how much they do it for..

 

Which part of Yishun? Which shop?

[KerplunkZ]

Hey bros...just wanna ask...anyone know how much does a top block costs?1st hand and 2nd hand also can...thanks in advance..ride safe everyone:)

 

200+ rm 1st hand i think. Cant remember

[faisaladilah]

Which part of Yishun? Which shop?

 

The corner shop..the tune in

[nosey]

i got a problem. when i corner left, i felt like it hit something..what do you thing is the problem uh guys?

[entyla]

200+ rm 1st hand i think. Cant remember

 

thanks dude..will survey it soon

[KerplunkZ]

i got a problem. when i corner left, i felt like it hit something..what do you thing is the problem uh guys?

 

ure fork ? check whether got leaking

[RochorBay]

hi guys a juz got myself a TZM. which 2t and eo is best for TZM? and hw often do i need to service the powervalve? thx in advance

[KerplunkZ]

hi guys a juz got myself a TZM. which 2t and eo is best for TZM? and hw often do i need to service the powervalve? thx in advance

 

use motorex or motul 2t. eo i using motul.

[nosey]

use motorex or motul 2t. eo i using motul.

 

where to find motorex?

[nosey]

use motorex or motul 2t. eo i using motul.

 

where to find motorex?

[plit]

hi guys a juz got myself a TZM. which 2t and eo is best for TZM? and hw often do i need to service the powervalve? thx in advance

 

so far im using motul transgear oil (hoping for a better eo, any recommendation??)

 

penzoil marine plus 2t ard 25 to 30rm and only available in msia only.

 

And i finally found a solution for my problem of my valve not opening at 8k rpm, not really that much of a solution. When i was using v-power(sg), valve dun wan to open,

v-power(msia makes a whole lot of diff)

[Movitar]

http://www.singaporebikes.com/forums/showthread.php/318379-wTs-tZm-tZr-rXz-StuffS?highlight=

 

castor 927 n Formula K2 from maxima 2T is the way to go

[Movitar]

i got a problem. when i corner left, i felt like it hit something..what do you thing is the problem uh guys?

 

Try checking the wheel bearings/brake disc/caliper.. May be loose or spoiled..

[Jehuty]

When running in 2 strokers, do you use full synth, semi or mineral for the running in? For both EO and 2T.

[Eddy Cruzie]

HI guys,im currently riding a tzm motorbike,i realised that my bike always runs out of fuels within a week $25.00,and quite slow in pickups starts,and i find it hard to reach my preferred speed or at least above 120-140km/h,even a vespa and and any other motorbikes can easily overtake me on 100km/h..im thinking of changing OR Modified my bike but its gonna cost me a BOMB..since im saving up money for my personnel expenses..So im seeking advice or help about my bike condition to make a good bike..any recommendations for any good 'cheap' affordable place to do some 'servicing' for TZM bikes in singapore?because i keep hearing from other ppl that i wont last with a TZM bike..what should i do?i want to prove them wrong about tzm bikes..please help..=D