Wrapping of S4 encan with shiny aluminum

[nate531]

Does anyone knows where to wrap or get a shiny coating for the endcan? I saw a few S4 riders whose endcan are shinier compared to mine. The original encans are not that shiny so I believe they must have wrapped their endcans with a peice of aluminum sheet or something.

[nightsteed]

http://www.smartmarine.co.nz/images/large/autosol.jpg

[dragonforce]

your belief is probably wrong.. they polished the stock end can still it shines..

[Baphomet]

i know seng kwang do wrapping of endcans...but can anyone advise on the price? i want to rewrap my micron...got dent..

[nate531]

If I'm wrong dragonforce, I polish my own endcan with autosol. And if you are wrong, you will polish my 'endcan' till it shines brother!

[dragonforce]

if you are willing to pay me to do it.. no prob dude~ haha.. anyway use meguires metal polish.. try it! its good! not autosol.. autosol is abrasive..

[starr]

i know seng kwang do wrapping of endcans...but can anyone advise on the price? i want to rewrap my micron...got dent..

 

facing the same thing too.. but mine is a small pin size dent. haiz.. any answers anyone?

[dEeLdo]

if you are willing to pay me to do it.. no prob dude~ haha.. anyway use meguires metal polish.. try it! its good! not autosol.. autosol is abrasive..

 

yes, use meguires :thumb: 2 thumbs up

[Baphomet]

facing the same thing too.. but mine is a small pin size dent. haiz.. any answers anyone?

 

pin size ok la..mine is like 1cm by 1cm...suspect is gena hit by my wife's heel...wah lau ae....heard that its ard 80 bucks to rewrap..any bros here can verify?

[dragonforce]

y not go sengkwang and ask them? can get a definite answer..

[Baphomet]

y not go sengkwang and ask them? can get a definite answer..

 

firstly if don't know estimated price...scared will be chopped...

 

secondly, if too costly, will not change as not worth it..so dun need waste trip down mah...

[nate531]

That's true. So to all those who have the answers, please share in this forum.

However, do not give ideas on polishing. If I want to know about polishing my endcan, I would have stated it in the 1st place. What i want to know is where to wrap the exterior of the endcan to make it more shiny. Especially super4 riders who definitely know regarding this matter.

[Silent Hunter]

y not go sengkwang and ask them? can get a definite answer..

 

firstly if don't know estimated price...scared will be chopped...

 

secondly, if too costly, will not change as not worth it..so dun need waste trip down mah...

 

Not worth it in my opinion, quoted $80 just for a cover to be welded onto my Phantom exhaust.

 

When I asked for full wrapping, don't want weld, the boss said the wrap only wrap outside not all round, Already $100 ++

 

S4 Endcam bigger, so you want to know the price, better ask them on your own.

[kobesingh]

wrap sticker lo... $50....

[cyr]

best would be polish if not do an exhaust wrap at juzz wheels

[Guest alxfoo]

jus for info. I was told during my inspection that wrapping ur exhuast is illegal.

[GuiNNeSS]

jus for info. I was told during my inspection that wrapping ur exhuast is illegal.

 

Errr.... can anyone confirm this?

 

Personally I think the guy who told you this is pulling a fast one. Cos lots of ppl with small abrasive damage on their cans will send for wrapping. And first time i heard of this.

[WildCard]

Errr.... can anyone confirm this?

 

Personally I think the guy who told you this is pulling a fast one. Cos lots of ppl with small abrasive damage on their cans will send for wrapping. And first time i heard of this.

 

Actually I can confirm this.

I wrapped my TLR stock end cans with CF-sticker before.

 

The inspection staff says its actually not allowed.

Why?

The factory engravings on the OEM can which specified what approvals it has is covered up.

I remembered he mentioned that if the engravings are exposed, then it would alright.

[GuiNNeSS]

Hey Wild! long time no see lah. I hope all is well with you.

 

Hmmm.... interesting idea with leaving the stamping visible. I was thinking about this..... maybe might do just that!

[WildCard]

Hey Wild! long time no see lah. I hope all is well with you.

 

Hmmm.... interesting idea with leaving the stamping visible. I was thinking about this..... maybe might do just that!

 

Hahaha!

You too!

I just got in touch back with Bobo as well.

 

 

That's the idea I guess.

If wanna do end can wrapping, maybe leave a cut out for the engraving part.

Which raises another question:

What if the end can that got rashed from an accident scratches out the engraving?

 

What bike you riding now?

[Cyanide14]

if you are willing to pay me to do it.. no prob dude~ haha.. anyway use meguires metal polish.. try it! its good! not autosol.. autosol is abrasive..

 

yes, use meguires :thumb: 2 thumbs up

 

Where can i buy this "meguires"?

Thx!