Honda NSR250 Riders

[Maverick1605198764]

So juz to confirm. The new shop of Eugene Tan (Race werkz) is located at blk 1006, Bukit Merah Lane 2, the last shop. Right?

[Maverick1605198764]

Any good spark plug to recommend for our PGM? Any feedback on Motul engine oil and 2T? And wat is the interval to change ur plugs and engine oil?

[MC28]

Originally posted by PGMPilot@Mar 25 2005, 01:02 PM

Any good spark plug to recommend for our PGM? Any feedback on Motul engine oil and 2T? And wat is the interval to change ur plugs and engine oil?

i use denso iridium on my bike last time..change plugs around once every 2-3 months..my ex pgm use to run on esso gold which i find is not bad..

 

and yes,racewerkz is located at the end of blk 1006..mind checkin for me if their maxima chain wax stock is here yet while u r there?

[Maverick1605198764]

Originally posted by MC28@Mar 25 2005, 01:06 PM

i use denso iridium on my bike last time..change plugs around once every 2-3 months..my ex pgm use to run on esso gold which i find is not bad..

 

and yes,racewerkz is located at the end of blk 1006..mind checkin for me if their maxima chain wax stock is here yet while u r there?

Heard tat it is good too but price is kinda o the high side. Wat is the recommended mileage for the plug and oil change for our bike? Will ask for u if happen to drop by ET.

[MC28]

Originally posted by PGMPilot@Mar 25 2005, 01:19 PM

Heard tat it is good too but price is kinda o the high side. Wat is the recommended mileage for the plug and oil change for our bike? Will ask for u if happen to drop by ET.

oil i would recommend maxima gear oil + denso iridium plugs = best combination for me last time..

[Maverick1605198764]

Originally posted by MC28@Mar 25 2005, 01:20 PM

oil i would recommend maxima gear oil + denso iridium plugs = best combination for me last time..

So 1 bottle of gear oil is enough for our bike, rite?

[MC28]

Originally posted by PGMPilot@Mar 25 2005, 01:26 PM

So 1 bottle of gear oil is enough for our bike, rite?

yes..it onli requires 0.7l..

[Maverick1605198764]

Originally posted by MC28@Mar 25 2005, 01:27 PM

yes..it onli requires 0.7l..

OK. thanks dude. And one more question. Wat time ET open?

[MC28]

Originally posted by PGMPilot@Mar 25 2005, 01:38 PM

OK. thanks dude. And one more question. Wat time ET open?

after 11am..

[BuRR06]

hi .. any of u guys here have lobang for a 2nd hand or RE-Cond PGM cdi wif key?? cos i lost my PGM card key .

 

THANKS

[Maverick1605198764]

Originally posted by BuRR06@Mar 29 2005, 09:45 PM

hi .. any of u guys here have lobang for a 2nd hand or RE-Cond PGM cdi wif key?? cos i lost my PGM card key .

 

THANKS

U wanna try HRC030 unit? I got a friend selling. If u want, I can arrange for you to deal with him directly. No commission on my part.

[MC28]

Originally posted by PGMPilot@Mar 30 2005, 02:11 PM

U wanna try HRC030 unit? I got a friend selling. If u want, I can arrange for you to deal with him directly. No commission on my part.

030 unit?

 

dun tink there's such a thing..

 

i believe ur fren got himself a 030 card and change the original cdi harness to enable the 030 card to work or did some wire modifications..

 

if change haress,the cdi wont work wif original card..

[Maverick1605198764]

Originally posted by MC28@Mar 30 2005, 02:24 PM

030 unit?

 

dun tink there's such a thing..

 

i believe ur fren got himself a 030 card and change the original cdi harness to enable the 030 card to work or did some wire modifications..

 

if change haress,the cdi wont work wif original card..

Oh! I think I was mistaken when he told me about having HRC 030. Thanks for correcting the mistake. Anyway, I feel tat since BuRR06 had lost his key, he may as well make use of the chance to mod to HRC 030 using his original, good-conditioned cdi instead of sourcing for another set. BTW, The 030 card need to be programmed to the cdi serial number before it can be used, rite? But who can do the programing?

[MC28]

Originally posted by PGMPilot@Mar 30 2005, 07:03 PM

Oh! I think I was mistaken when he told me about having HRC 030. Thanks for correcting the mistake. Anyway, I feel tat since BuRR06 had lost his key, he may as well make use of the chance to mod to HRC 030 using his original, good-conditioned cdi instead of sourcing for another set. BTW, The 030 card need to be programmed to the cdi serial number before it can be used, rite? But who can do the programing?

Programming of the card is done overseas..If u go racewerkz,they will dismantle ur cdi and take down the cdi serial num before ordering it from overseas using ur cdi serial num..once the card is here,they will mod some wiring and add in a switch which enables u to switch between the original card(if u still have 1) and a 030 card..

[Maverick1605198764]

Originally posted by MC28@Mar 30 2005, 07:43 PM

Programming of the card is done overseas..If u go racewerkz,they will dismantle ur cdi and take down the cdi serial num before ordering it from overseas using ur cdi serial num..once the card is here,they will mod some wiring and add in a switch which enables u to switch between the original card(if u still have 1) and a 030 card..

Actually any side effect on our bike using HRC 030 e.g. engine or parts premature stress, or over-temperature? Got the HRC 030 when I got the bike, but cdi wiring is being mod back to original by the ex-owner. So not sure whether to try it. The rewiring mod should not cost too much, rite?

[MC28]

Originally posted by PGMPilot@Mar 31 2005, 07:01 PM

Actually any side effect on our bike using HRC 030 e.g. engine or parts premature stress, or over-temperature? Got the HRC 030 when I got the bike, but cdi wiring is being mod back to original by the ex-owner. So not sure whether to try it. The rewiring mod should not cost too much, rite?

it's not good to hit too much redline for a 2 stroke..

[Guest justmelah]

Hi guys,

 

I am getting some parts in for another project , wonder if anyone need anything for nsr250 like:

 

1)race clutch spring set

2)performance foam filters

3)hrc head setup kit

4)hrc intake rectifier

 

if enough orders are amassed, i can get bulk discounts and everyone saves. installation will arranged by RaceWerks.

 

thks

[Andox]

Originally posted by justmelah@Apr 1 2005, 01:16 AM

Hi guys,

 

I am getting some parts in for another project , wonder if anyone need anything for nsr250 like:

 

1)race clutch spring set

2)performance foam filters

3)hrc head setup kit

4)hrc intake rectifier

 

if enough orders are amassed, i can get bulk discounts and everyone saves. installation will arranged by RaceWerks.

 

thks

Hey bro could u check out for mi hw much it cost for a set of clutch housing n plates....thanx:help:

[BuRR06]

Originally posted by PGMPilot@Mar 30 2005, 07:03 PM

Oh! I think I was mistaken when he told me about having HRC 030. Thanks for correcting the mistake. Anyway, I feel tat since BuRR06 had lost his key, he may as well make use of the chance to mod to HRC 030 using his original, good-conditioned cdi instead of sourcing for another set. BTW, The 030 card need to be programmed to the cdi serial number before it can be used, rite? But who can do the programing?

yes i have been trying to get my hands on a HRC card too..but no shop seems to be able to order one from overseas.. i even tried racewerks.. but they too cant get one now..

 

so PGMPILOT... ur fren got the lobang or is he selling one??

[Guest justmelah]

Originally posted by NSR250@Apr 1 2005, 01:34 PM

Hey bro could u check out for mi hw much it cost for a set of clutch housing n plates....thanx:help:

clutch housing and plates can get locally.. No point ordering from overseas, the postage cost outweights everything. Locally should be around 500. Call up racewerks to check with william loh

[kC]

Originally posted by justmelah@Apr 1 2005, 01:16 AM

Hi guys,

 

I am getting some parts in for another project , wonder if anyone need anything for nsr250 like:

 

1)race clutch spring set

2)performance foam filters

3)hrc head setup kit

4)hrc intake rectifier

 

if enough orders are amassed, i can get bulk discounts and everyone saves. installation will arranged by RaceWerks.

 

thks

What's yr new project? The same 400cc 2 stroke?

[Sesshou]

Originally posted by BuRR06@Apr 1 2005, 03:11 PM

yes i have been trying to get my hands on a HRC card too..but no shop seems to be able to order one from overseas.. i even tried racewerks.. but they too cant get one now..

 

so PGMPILOT... ur fren got the lobang or is he selling one??

i can get for you ........ $300 . if interested Pm me

[Guest justmelah]

Originally posted by kC@Apr 1 2005, 04:39 PM

What's yr new project? The same 400cc 2 stroke?

another.... secret 1st....

[Guest justmelah]

Originally posted by kC@Apr 1 2005, 04:39 PM

What's yr new project? The same 400cc 2 stroke?

another.... secret 1st....

[Maverick1605198764]

Originally posted by BuRR06@Apr 1 2005, 03:11 PM

yes i have been trying to get my hands on a HRC card too..but no shop seems to be able to order one from overseas.. i even tried racewerks.. but they too cant get one now..

 

so PGMPILOT... ur fren got the lobang or is he selling one??

He had got one for sale. But as wat MC28 said, it need to be sent overseas to be reprogrammed for your cdi. If u r interested, let me check with him again to see if it is still lying around and get back to u, ok?