Honda ST1100

[FunkyChicken]

Originally posted by thomas28@May 26 2006, 09:26 AM

On the left hand side of the motor, above / beside the oil filter. You have to remove a metal shield before you cab access the starter motor proper.

 

Thomas

thank you Thomas!!

 

doin some diy...hehehhee

[coolant4x4]

Originally posted by Niti@May 26 2006, 02:09 PM

Alamak, where is dat man...?

http://www.picturesky.com/albums/userpics/11754/photo-7499.jpg

[Simon Soh]

Originally posted by FunkyChicken@May 26 2006, 05:16 PM

thank you Thomas!!

 

doin some diy...hehehhee

FunckyChicken,

 

show us the DIY leah...

[PearlST]

Reasonable condition / Price == 12/2000 ST1100Y ??

P.M me a price la.... milleage less then 70k km

Just some minor wear & tear that need to be changed.

 

Original Windshield ???

Have ... but condition 7/10 liao... actually can be better using the Autosol method

didnt really clean it ... maybe someone want to quote for my Givi ??

 

Backrest ???

I alos have ... SengKwang Chrom 1 somemore.... very nice nice....

but hor need to change the leather pouch... torn and zip spoilt liao

 

 

Jack

[momo1605198623]

Originally posted by thomas28+May 26 2006, 09:24 AM-->

QUOTE (thomas28 @ May 26 2006, 09:24 AM)

momo,   Original windshield can get from a few places. Boon Siew quoted me $500++ for the original windshield, whereas Chong Aik quoted me $400++ for one.   Alternatively, you could get after market winshield from Motorworld which cost not more than $300, or you could ask bikeworkz at Dunlop st for one. It looks like an original windshield except that the windshield is higher by about an inch / 2 inch. Forget already. but i saw the windshield before. It is in clear.   Thomas [/b] Originally posted by amen23@May 26 2006, 09:48 AM Yo momo,   From wat I know the price of original windshield is more expensive than aftermarket windshield(MRA) Price abt $260. Why not get the MRA.

[FunkyChicken]

-Went to add 4 more majorpoints which motoworld didnt ground which is ignition coil. starter motor and cam. Cleaned the connection cable for my battery and wiring. the ignition coil bit troublesome.

 

-add 2 rear brake lights at my box, tap at my rear brake lights.

 

-voltmeter- tap positive wire to my ignition fuse instead of the ignition wiring coz don't wana cut the wire and chances of open circuit if not connected properly is high.

 

-voltage stabiliser, formerly from my vtec. capacitor inside to replenish voltage when the bike is in surge for more wattage.

 

-neodydium magnet, fixed at my fuel line for better response and fuel efficiency. formerly from my vtec.

 

Bike response, throttle is amazingly superb!! less vibration when moving off. My lights for meter, brakelight is brighter.

 

damn satisfied wif my DIY!!! YEAY!!!

next on the list are speakers

 

some attached pics...

[FunkyChicken]

voltmeter

[FunkyChicken]

ignition coil

[FunkyChicken]

main grounding

[ngleo]

Originally posted by [momo]@May 27 2006, 02:38 AM

 

 

 

Thanks bro thomas28, bro amen23 & bro ngleo for the tips...

will check out wif motoworld on the MRA windshield...

 

btw, bro ngleo the windshield u using izzit the 2 pcs one?

That's right it's 2 pieces and it can do small adjustment to deflect off wind. It also comes with different height.

[Simon Soh]

Originally posted by FunkyChicken@May 27 2006, 03:21 AM

-Went to add 4 more majorpoints which motoworld didnt ground which is ignition coil. starter motor and cam. Cleaned the connection cable for my battery and wiring. the ignition coil bit troublesome.

 

-add 2 rear brake lights at my box, tap at my rear brake lights.

 

-voltmeter- tap positive wire to my ignition fuse instead of the ignition wiring coz don't wana cut the wire and chances of open circuit if not connected properly is high.

 

-voltage stabiliser, formerly from my vtec. capacitor inside to replenish voltage when the bike is in surge for more wattage.

 

-neodydium magnet, fixed at my fuel line for better response and fuel efficiency. formerly from my vtec.

 

Bike response, throttle is amazingly superb!! less vibration when moving off. My lights for meter, brakelight is brighter.

 

damn satisfied wif my DIY!!! YEAY!!!

next on the list are speakers

 

some attached pics...

FunckyChicken,

 

walan eh...! blind ppl also can see ar...!!!

[momo1605198623]

Originally posted by ngleo@May 27 2006, 03:46 PM

That's right it's 2 pieces and it can do small adjustment to deflect off wind. It also comes with different height.

hi bro ngleo, thanks for the input...

but i still prefer one pc one...

 

hmm... like tat gotta source ard liao...

[thomas28]

Originally posted by [momo]@May 28 2006, 02:46 AM

hi bro ngleo, thanks for the input...

but i still prefer one pc one...

 

hmm... like tat gotta source ard liao...

momo,

 

Try Bikeworkz at Dunlop Street. The windshield they have is a one piece windshield. Also, the height of the windshield is higher to better deflect the wind away. If not wrong the last time I ask they say it cost around $180/$185. Definetely not more than $200.

 

Thomas

[momo1605198623]

Originally posted by thomas28@May 28 2006, 10:38 AM

momo,

 

Try Bikeworkz at Dunlop Street. The windshield they have is a one piece windshield. Also, the height of the windshield is higher to better deflect the wind away. If not wrong the last time I ask they say it cost around $180/$185. Definetely not more than $200.

 

Thomas

okie... thanks...

[momo1605198623]

hi ST bros, my ST have no headlite switch one..

if i change to the control wif headlite switch who can i find to help me connect?

cos the shop tat i buy dunno how to connect or maybe they r juz too lazy to..

 

Thanks..

 

momo.

[thomas28]

Originally posted by [momo]@May 28 2006, 01:11 PM

hi ST bros, my ST have no headlite switch one..

if i change to the control wif headlite switch who can i find to help me connect?

cos the shop tat i buy dunno how to connect or maybe they r juz too lazy to..

 

Thanks..

 

momo.

momo,

 

Try GOPA at AMK Ind Park 2. Located on the 5th floor of AMK Autopoint.

 

Thomas

[momo1605198623]

Originally posted by thomas28@May 28 2006, 05:54 PM

momo,

 

Try GOPA at AMK Ind Park 2. Located on the 5th floor of AMK Autopoint.

 

Thomas

okie... Thanks...

[rogerfock]

Originally posted by FunkyChicken@May 27 2006, 03:21 AM

-Went to add 4 more majorpoints which motoworld didnt ground which is ignition coil. starter motor and cam. Cleaned the connection cable for my battery and wiring. the ignition coil bit troublesome.

 

-add 2 rear brake lights at my box, tap at my rear brake lights.

 

-voltmeter- tap positive wire to my ignition fuse instead of the ignition wiring coz don't wana cut the wire and chances of open circuit if not connected properly is high.

 

-voltage stabiliser, formerly from my vtec. capacitor inside to replenish voltage when the bike is in surge for more wattage.

 

-neodydium magnet, fixed at my fuel line for better response and fuel efficiency. formerly from my vtec.

 

Bike response, throttle is amazingly superb!! less vibration when moving off. My lights for meter, brakelight is brighter.

 

damn satisfied wif my DIY!!! YEAY!!!

next on the list are speakers

 

some attached pics...

wow.. cool rear brake lit.. haha .... nv put 2 luminious light at the front? more cool.. lol..

 

How come din get the digital voltmeter one?

[h_LoNg]

Can i knoe any1 of ST owners r less than 1.68m?

I interested in gettin 1 but height is a prob for mi... i oready need to tip toe a bit on my S4 now

[FunkyChicken]

Originally posted by rogerfock@May 28 2006, 11:53 PM

wow.. cool rear brake lit.. haha .... nv put 2 luminious light at the front? more cool.. lol..

 

How come din get the digital voltmeter one?

hehehe i plan to put 2 red led at the hole located next to signal lite.... but sure to kena curse!! hahahhaa

 

ermm saw the digital voltmeter but i prefer the analogue type....

 

sundae malacca trip!!!

[thomas28]

Originally posted by @h_LoNg@May 29 2006, 01:30 AM

Can i knoe any1 of ST owners r less than 1.68m?

I interested in gettin 1 but height is a prob for mi... i oready need to tip toe a bit on my S4 now

There are people less than 1.68m riding the ST11. The most common solution is to cut the seat lower to accomodate your height. You can come to LC Foodcourt located at the former T.Katong Sec Sch to look at some of the seats that has been cut.

 

Thomas

[NiC82]

hi guys....i juz gt mi ST11 ..... nice bike!! :lovestruck:

 

hav a question to ask u all... the engine hav i veri mild "tock"ing feeling...when i do an engine brake...the "tock"ing feeling get stronger..

ask the bike shop .. they say all st11 r like tht...izzit true..? or the timing belt have to b adjust? :help:

 

and another question .. abt the small box (the one look like TP box) behind .... where to purchase tht box..and whts the price range...thankzz

[Simon Soh]

Originally posted by ^NiC82@May 29 2006, 06:01 PM

hi guys....i juz gt mi ST11 ..... nice bike!! :lovestruck:

 

hav a question to ask u all... the engine hav i veri mild "tock"ing feeling...when i do an engine brake...the "tock"ing feeling get stronger..

ask the bike shop .. they say all st11 r like tht...izzit true..? or the timing belt have to b adjust? :help:

 

and another question .. abt the small box (the one look like TP box) behind .... where to purchase tht box..and whts the price range...thankzz

 

^NiC82,

 

ST1100 is a bike designed to take miles without much of hazzle & plm... so far I hear no owner complain it rides smooth & quiet, comfortable manoeuvre ability & reliablity. the only downside is it's weight.

 

what model & year make..?

 

I believed those 'small' box u seen r modified from small safe-box or keypress holder box, some drilling & grooming done niah.

[NiC82]

oh ok...thanks simon ... i thought tht sound mayb some mechanical problem .... okok ..btw mi is a '99 model pan european..

[Simon Soh]

Originally posted by ^NiC82@May 29 2006, 10:44 PM

oh ok...thanks simon ... i thought tht sound mayb some mechanical problem .... okok ..btw mi is a '99 model pan european..

^NiC82,

 

let me hear the 'tocking sound' as u quoted earlier when u r able to meet me.