The GSXR 600,750 & 1000 Hangout. Where All GSXR Riders Chill And Gather!!

[Guest yanani18&27]

Originally posted by ahchua5582@January 22, 2007 09:33 am

hey guys, i remember 1 mth plus ago, got someone post something about race baffle thing... anyone noes where can get a not??

it illegal bro

but i can send u their email when i got hm later

[Guest yanani18&27]

PLS ADD ON

(PLS UPDATE THE LASTEST LIST..THKS)

 

INVITATION to R1 ridersDate : 28th Jan 2007 Time : 930am Venue : Blk 230 compassvale walk

Event : My wedding Buffet session

 

Going List:

 

1) George & Wenshi

2) alj & minmin

3)

4) Eric28 & gf

5) Vidz23 & gf

6) Lopes430 & gf

7) shaunz & ?

8) Milan & Daphne

9) prodigalson

10) saviour 82

11)Xniner & gf

12)bsk_R103 & gf

13) yanani(will go if my bike is already out from the shop)

 

...

 

Let me noe in advance b4 28th Jan07 8am.

........................................................................................................

ESCORT TO FETCH BRIDE!!! PLS ADD NAME (Due to formation reasons, need abt 10-12 bikers..others see u at the makan k)

 

TIME: 630AM(setting off around 7am)

Also let me know in advance, so can plan..thks for support!!!

 

1)

2) Milan

3) alj

4) Eric28

5) Vidz23

6) shaunz

7) prodigalson

8) lopes430

9) saviour 82

10)Xniner

11)bsk_R103

12) yanani(will go if my bike is already out from the shop)

 

...

 

Well Wishes List..

 

1) kambing(working) - may you be blessed with lotsa kids and a happy marriage bro..

2) yanani(will go if my bike is already out from the shop)

3) Leslayer (may u have a w0nderful marriage )

4) `L` ( happy newly wed couple )

5) InsanE(paiseh george don think i can go... cos my relative juz pass away last mth, heard tat its not gd to attend ceremonies as they might "clash"..)

6) Ahchua (Wish u zhao shen gui zi)!!!! ( Cant go cos got to help surgeons to save patients)!!!

[bsk_R103]

Originally posted by @January 22, 2007 03:55 pm

PLS ADD ON

(PLS UPDATE THE LASTEST LIST..THKS)

 

INVITATION to R1 ridersDate : 28th Jan 2007 Time : 930am Venue : Blk 230 compassvale walk

Event : My wedding Buffet session

 

Going List:

 

1) George & Wenshi

2) alj & minmin

3)

4) Eric28 & gf

5) Vidz23 & gf

6) Lopes430 & gf

7) shaunz & ?

8) Milan & Daphne

9) prodigalson

10) saviour 82

11)Xniner & gf

12)bsk_R103 & gf

13)

...

 

Let me noe in advance b4 28th Jan07 8am.

........................................................................................................

ESCORT TO FETCH BRIDE!!! PLS ADD NAME (Due to formation reasons, need abt 10-12 bikers..others see u at the makan k)

 

TIME: 630AM(setting off around 7am)

Also let me know in advance, so can plan..thks for support!!!

 

1)

2) Milan

3) alj

4) Eric28

5) Vidz23

6) shaunz

7) prodigalson

8) lopes430

9) saviour 82

10)Xniner

11)bsk_R103

12)

...

 

Well Wishes List..

 

1) kambing(working) - may you be blessed with lotsa kids and a happy marriage bro..

2) yanani(not comfirm yet,will get back to ya by 15 jan)

3) Leslayer (may u have a w0nderful marriage )

4) `L` ( happy newly wed couple )

5) InsanE(paiseh george don think i can go... cos my relative juz pass away last mth, heard tat its not gd to attend ceremonies as they might "clash"..)

6) Ahchua (Wish u zhao shen gui zi)!!!! ( Cant go cos got to help surgeons to save patients)!!!

okok, then i'll wait for further news la, most prob if can meet up for washing on sat plan by saviour82 then let us know more details, and mine alone not loud enough, it's the singing of all the yammies pipes and rattling of the engines that our 'da sao' will hear on sun..lets give the residents a morning call..Woo-Hoo!!

[maxbg]

Originally posted by @January 22, 2007 03:08 pm

Yoz, bro Max... long time no see... this Sunday free to join us, we going to rock the puggol for bro 7geogre8 to fetch his bride..

Congrats to 7George8 on his Wedding. :cheer:

 

BTW, not sure if I can make it on 28th. So my Best Wishes to the Groom and Bride.

[bsk_R103]

Originally posted by Xniner@January 22, 2007 07:47 pm

Who wans to go chop passport tis coming fri?

my gf and i going to jb to eat lok-lok, most prob will enter through woodlands ck-pt..so think may meet up to wash bike only on sat..

[nocturnized]

Originally posted by WW@January 22, 2007 04:31 pm

I think the best is to get the GI-Pro TRE, which come with a gear indicator.But it very exspensive.

Cost about $200 plus right ?

 

 

 

[nocturnized]

Originally posted by kinwei@January 22, 2007 04:34 pm

Actully, TRE is very hard to spoilt, reason is as you know inside is just a resistor, and the current passing through it is very small, thus the chances of the resistor being fried is pretty small. Actually I dun remember the rpm will drop during idling. It happen to you all the time?

dats what i think also.. Coz so far, not much of a problem running thru the rpm .. For my idling, now it's at around 1.4 like that laa.. so........................ i guess should be no problem hor.

 

Ok i got 2 question:-

 

1) What does Valve clearance do ? As in what do they check for ?

 

2) For a K4/K5 G6, compare to a R6'06, since the R6 has got a more higher RPm ceiling, it will mean that once the G6 clears the Rpm for a certain gear, the R6 will still pull away a bit right since it's got a few more Rpms to go ? (provided both are in the same gear)

[WW]

Originally posted by ET@January 22, 2007 07:13 pm

Wa....i think dyno liao...should have 189BHP....~~~

i am looking at 200bhp. LOL

And the GI-pro TRE cost 200plus. But i think it really a very nice display. Specially for the k4/5 600 which do not have gear indicator.

[nocturnized]

Originally posted by WW@January 22, 2007 08:47 pm

And the GI-pro TRE cost 200plus. But i think it really a very nice display. Specially for the k4/5 600 which do not have gear indicator.

Yaa.. WW can buy me one ?? hehehe

[WW]

Originally posted by nocturnized@January 22, 2007 08:39 pm

dats what i think also.. Coz so far, not much of a problem running thru the rpm .. For my idling, now it's at around 1.4 like that laa.. so........................ i guess should be no problem hor.

 

Ok i got 2 question:-

 

1) What does Valve clearance do ? As in what do they check for ?

 

2) For a K4/K5 G6, compare to a R6'06, since the R6 has got a more higher RPm ceiling, it will mean that once the G6 clears the Rpm for a certain gear, the R6 will still pull away a bit right since it's got a few more Rpms to go ? (provided both are in the same gear)

Valve clearance , they will use a filler guage to check your clearance of your valve. Our service manual will have a min allowance and max allowance clearance state. So the mech will need to insert the guage and measure and adjust according. Somethime will even after adjust also cannot, you need to grin your valve. It a lot of work.

 

More RPM does not mean bike will pull away more, it depend on the power of the bike and touqueof the bike, i believe if compare a roll on btw a k4/5 G6 and a 06R6 , the gixxer will pull away first, but will be overtaken by the R6 very fast.

(i assume both bike gearing are stock)

[WW]

Originally posted by nocturnized@January 22, 2007 08:54 pm

Yaa.. WW can buy me one ?? hehehe

i am waiting for someone to buy for mi lei. LOL

[ET]

Originally posted by WW@January 22, 2007 08:47 pm

i am looking at 200bhp. LOL

And the GI-pro TRE cost 200plus. But i think it really a very nice display. Specially for the k4/5 600 which do not have gear indicator.

HoHO...Sianzz...i also bikeless ler...now bike in xiong's hand for dyno...

[nocturnized]

Originally posted by WW@January 22, 2007 08:56 pm

Valve clearance , they will use a filler guage to check your clearance of your valve. Our service manual will have a min allowance and max allowance clearance state. So the mech will need to insert the guage and measure and adjust according. Somethime will even after adjust also cannot, you need to grin your valve. It a lot of work.

So.... issit necessary to do valve clearance ? What happens if u don't ?

[WW]

Originally posted by nocturnized@January 22, 2007 09:04 pm

So.... issit necessary to do valve clearance ? What happens if u don't ?

if you feel your bike is losing power. normally ppl will do valve clearance at abut 40000km or more. if i am notwrong Our service manual state it at 20000km.

vavle clearance is hard work, so it not cheap.

[lvin]

Originally posted by WW@January 22, 2007 09:25 pm

if you feel your bike is losing power. normally ppl will do valve clearance at abut 40000km or more. if i am notwrong Our service manual state it at 20000km.

vavle clearance is hard work, so it not cheap.

i feel my bike is losin power ler...maybe it is time to do it lor or maybe it is time to change bike...

[WW]

Originally posted by slow_sp@January 22, 2007 09:45 pm

i feel my bike is losin power ler...maybe it is time to do it lor or maybe it is time to change bike...

Your bike lose power??? your bike now like GP bike laio. your leg ok laio???

[R46]

Originally posted by slow_sp@January 22, 2007 09:45 pm

i feel my bike is losin power ler...maybe it is time to do it lor or maybe it is time to change bike...

yeah moto GP bike no need to worry 1 la no power also can race 1 and chase other ppl.

[BLacK.dOt]

Originally posted by kinwei@January 22, 2007 05:22 pm

Just a word of precaution for those riding K6/7. Recently I was taking out my side mirrors. And when I was unscrewing the special nut, the bolt snap. Leaving partial of the bolt stuck inside the mirror base. Then when I took out the mirror, I discover the other bolt is also going to crack. For those who had took out the mirror before might realise that the bolt itself have a allen key slot at the bottom end, but fact is, it cannot tahan heavy torque. Both the allen key slot crack also. Thus now one of my mirror cannot be used. I have tried alot of method to get the broken bolt out of the base, but cannot. Thus leaving me no choice to go buy one from ebay. Then I decided not to take the risk and change the bolt to those stainless steel cap screw (M6x25mm) for the okay side mirror. I dunno what the F**k susuki is doing, using such a weak bolt for the mirror. Anyway I've post a picture of how it will look like after using the cap screw just in case you all have no idea what I'm talking about.

hey i think k7 nt using allen key for

the base.. if i'm nt wrong shld be

those normal nut n bolt..

correct mi if i'm wrong..

 

 

for the Gi-Pro comes with

TRE n gear indicator right ? but k7

has already got the built in GI.

so that means both GI will be working

at the same time ?

 

hahaa.. am i asking a dumb question..

[GR1Y]

wah....all so onz on 28th ar keke.....ok la,any rider who come will ve free labour for my self invent cold air intake system for 98-03R1....tested on my own bike n the result is GOODIE GOOD ar lolx....travelling 100km/hr at 1pm-3pm,temp reading is only 72C...previously b4 i install,my temp reading is ard 89C

[ahchua5582]

Originally posted by yanani18@January 22, 2007 08:07 pm

it illegal bro

but i can send u their email when i got hm later

thanks bro, jus out of curiosity.. how do those rov guys noe since the baffle thing is install in the pipe...?

[nocturnized]

Originally posted by WW@January 22, 2007 09:25 pm

if you feel your bike is losing power. normally ppl will do valve clearance at abut 40000km or more. if i am notwrong Our service manual state it at 20000km.

vavle clearance is hard work, so it not cheap.

Hmm.. 40000km. Have u done urs ?

[GR1Y]

Originally posted by ahchua5582@January 22, 2007 11:28 pm

thanks bro, jus out of curiosity.. how do those rov guys noe since the baffle thing is install in the pipe...?

the baffle circumfrence is bigger....1 look can tell liao...nowadays ROV very pro liao le...

[Guest yanani18&27]

Originally posted by ahchua5582@January 22, 2007 11:28 pm

thanks bro, jus out of curiosity.. how do those rov guys noe since the baffle thing is install in the pipe...?

as the sound is louder than the normal original pipe sound

[TyrÃl]

Originally posted by ahchua5582@January 22, 2007 11:28 pm

thanks bro, jus out of curiosity.. how do those rov guys noe since the baffle thing is install in the pipe...?

 

 

and by posting it here, in tis public forum, u already told them....

 

[aH_Joe]

Originally posted by maxbg@January 22, 2007 08:20 pm

Congrats to 7George8 on his Wedding. :cheer:

 

BTW, not sure if I can make it on 28th. So my Best Wishes to the Groom and Bride.

No pro manzz... c ya soon for the next outing perhaps( maybe wif ya Vmax)