New Suzuki GSR750

[fabianpbs]

Full tank for this bike on NSHW riding between 160-190 can reach 220km?? Anyone try before can be done?

 

Nobody ride this bike go touring??

[darrenomc]

Nobody ride this bike go touring??

 

i rode to Melaka last month. Cruising around 140km/h. I refill once hit 240km.

[fabianpbs]

i rode to Melaka last month. Cruising around 140km/h. I refill once hit 240km.

 

Should be able to reach 200 km.. Yesterday sit on the bike at Looi the handle bar seen very low n tank quite high..

[keyxblade]

Should be able to reach 200 km.. Yesterday sit on the bike at Looi the handle bar seen very low n tank quite high..

 

actually i don't find the handle bar low. the height is similar to cbf600, super4 and fz6 to me. may be slightly lower abit. But the tank is height, when full lock the handle bar almost touch the tank.

[fabianpbs]

actually i don't find the handle bar low. the height is similar to cbf600, super4 and fz6 to me. may be slightly lower abit. But the tank is height, when full lock the handle bar almost touch the tank.

 

A bit like sport bike.. Seem a bit uncomfortable for touring..

[keyxblade]

A bit like sport bike.. Seem a bit uncomfortable for touring..

 

that's weird. I find it normal, definitely not like sport bike where u lean forward. if u find the handle bar too low u can always adjust it higher abit by rotating it or change another handle bar. The only problem i find is the tank is high and hard to u-turn, i guess they design it high to make it look nicer.

[fabianpbs]

that's weird. I find it normal, definitely not like sport bike where u lean forward. if u find the handle bar too low u can always adjust it higher abit by rotating it or change another handle bar. The only problem i find is the tank is high and hard to u-turn, i guess they design it high to make it look nicer.

 

Maybe my body a bit short so feel like sport bike.

[keyxblade]

Maybe my body a bit short so feel like sport bike.

 

my bro he ride sport bikes, he had gsxr1000, r6, r1, cb1000r and now he is riding rsv4 he says my bike handle bar is high and he not use to it. totally opposite from u haha

[fabianpbs]

my bro he ride sport bikes, he had gsxr1000, r6, r1, cb1000r and now he is riding rsv4 he says my bike handle bar is high and he not use to it. totally opposite from u haha

 

Maybe too use to my old ride a2005 fazer and current a TDM.. So gsr feel low...

[keyxblade]

Z800 vs fz8n vs gsr750

 

[darrenomc]

hi guys,

just checking is there any aftermarket pillion grab bar available for our gsr750?

[Hotbodies]

Belly Pan found!!! Now need to see who go Europe then can buy for me hahaha

 

http://www.bilder-hochladen.net/files/iddu-t-6ea9.jpg

 

 

Hi sorry to dig out this post. Any idea where I can get the belly pan in the picture?

[darrenomc]

Hi sorry to dig out this post. Any idea where I can get the belly pan in the picture?

 

doesn't look like the puig bellyban. maybe you can try amazon see whether you can find any similar bellypan.

[Hotbodies]

Checked amazon. Results is disappointing. Anyway besides motoworld any other places that sells Ermax belly pan?

[ambrosia]

Puig or barracuda belly pan looks the best to me. Especially puig

 

 

Devano AmbrosiA

You'll Never Ride Alone

🏁🚴💨💨💨

[keyxblade]

Yeah puig look great price also ex. 300+

 

Sent from my GT-I9100 using Tapatalk 4

[ambrosia]

But it's better than Ermax la bros. Barracuda or original SUZUKI belly pan seems more ex after conversion and shipping.

 

 

Devano AmbrosiA

You'll Never Ride Alone

🏁🚴💨💨💨

[Blassreiter]

Can I check with u guys where u usually do your servicing? Think my wheel bearings are worn off and wanna go for a check. Don't wanna kena chop by bike shop so looking for recommendations.

 

 

Sent from my iPhone using Tapatalk

[keyxblade]

But it's better than Ermax la bros. Barracuda or original SUZUKI belly pan seems more ex after conversion and shipping.

 

 

Devano AmbrosiA

You'll Never Ride Alone

🏁🚴💨💨💨

 

oh, did u buy the puig? I feel like buying it.

[darrenomc]

Can I check with u guys where u usually do your servicing? Think my wheel bearings are worn off and wanna go for a check. Don't wanna kena chop by bike shop so looking for recommendations.

 

 

Sent from my iPhone using Tapatalk

 

go back to the agent Guan Hoe. the uncle that service my bike not bad imo.

[darrenomc]

oh, did u buy the puig? I feel like buying it.

 

I saw the puig belly pan on amazon. wonder how much vpost charge for shipping.

[Blassreiter]

go back to the agent Guan Hoe. the uncle that service my bike not bad imo.

 

Thanks. Btw anyone using frame sliders here? What brand u guys using? I find my motovation sliders kinda small/short. Not sure if it will really help if the bike drops.

 

 

Sent from my iPhone using Tapatalk

[darrenomc]

Thanks. Btw anyone using frame sliders here? What brand u guys using? I find my motovation sliders kinda small/short. Not sure if it will really help if the bike drops.

 

 

Sent from my iPhone using Tapatalk

 

i was using the motovation sliders before having the same concern as you. so i went to extreme equipment to custom a slightly longer frame slider. so far very happy with it.

[keyxblade]

I saw the puig belly pan on amazon. wonder how much vpost charge for shipping.

 

I just check Amazon it's around 162 pounds which is 340sgd. Motivation sell 390. If include delivery I think close to motivation price

 

Sent from my GT-I9100 using Tapatalk 4

[Blassreiter]

i was using the motovation sliders before having the same concern as you. so i went to extreme equipment to custom a slightly longer frame slider. so far very happy with it.

 

Nice! How much damage was that to the pocket?

 

 

Sent from my iPhone using Tapatalk