Honda NSR150SP Riders

[gorgonitz82]

any good chain and sprocket to recommend dudes?

[guanjie]

something worth commenting on..

 

ytd felt my engine vibrating at gear 1-2, battery weak, headlights flickering heavily etc etc

 

went to xhm talked to the long hair guy.. the guy that used to work for khm & hou heng

 

he told me might be engine problem, say need to open engine see, cause might be very serious.. time was of issue hence i asked him need to take how long and the cost.. he told me an 1hr to open engine, many several hours if serious problem and need to fix.. and rm100+++ just to open engine

 

since i do not have the time and doubt it was the problem with the engine.. i went back and returned to hou heng today.. took hao less den an hour to fix the fuse/socket problem and costs rm35 including servicing for changing some sockets and wires, fixing new horns and brake pads, rewiring of wires etc

 

there are more details about how he compared prices and service quality btw the 2 shops which i shall not go into..

 

do note: im not rulling out the possibility that that guy sincerely believed that it was an engine problem even though he knew and helped out with the full servicing of my bike @ hou heng just a couple of weeks back. just that, what if i really left my bike at xhm? would i have expected the service charges to be over rm100+?

 

anyways.. anyone wanna change meter box? i'm offering a cash top up for a good condition meter box.. more if we trade meters.. mine's original

[Powieee]

guanjie , you bought your bike from a fellow SP forum-er right ?

[guanjie]

yea johnson

[heuer25]

Originally posted by mystery rider@March 06, 2007 11:35 pm

if the block head damage ur block and piston also siao liao....

Can! u r not wrong...

but.. since u need to drop ur engine to take out ur crankshaft for the replace of con-rod and bearing.. might as well u change the whole engine bearing and oil-seal.. if not next time u have to drop ur engine again for another bearing or oil-seal replacement...

 

since its the workmanship tat cost you more then the small small bearing and oil-seal...

den if i change the whole engine bearing, oil seal, conrod, conrod bearing plus the piston and piston ring how much would be the estimated cost?? any idea guys?

[fnee]

Originally posted by guanjie@March 07, 2007 01:36 am

something worth commenting on..

 

ytd felt my engine vibrating at gear 1-2, battery weak, headlights flickering heavily etc etc

 

went to xhm talked to the long hair guy.. the guy that used to work for khm & hou heng

 

he told me might be engine problem, say need to open engine see, cause might be very serious.. time was of issue hence i asked him need to take how long and the cost.. he told me an 1hr to open engine, many several hours if serious problem and need to fix.. and rm100+++ just to open engine

 

since i do not have the time and doubt it was the problem with the engine.. i went back and returned to hou heng today.. took hao less den an hour to fix the fuse/socket problem and costs rm35 including servicing for changing some sockets and wires, fixing new horns and brake pads, rewiring of wires etc

 

there are more details about how he compared prices and service quality btw the 2 shops which i shall not go into..

 

do note: im not rulling out the possibility that that guy sincerely believed that it was an engine problem even though he knew and helped out with the full servicing of my bike @ hou heng just a couple of weeks back. just that, what if i really left my bike at xhm? would i have expected the service charges to be over rm100+?

 

anyways.. anyone wanna change meter box? i'm offering a cash top up for a good condition meter box.. more if we trade meters.. mine's original

who? danny?

 

he used to work for xinghock with ah jie and ah pin. then he went further up to work for another shop, then he left that shop (let's call that shop A) and went to work for another shop B.

 

now he's back at xing hock cause ah pin needs manpower.

 

i understand that hou heng shoots xing hock and vice versa. it's common between all shops doing the same trade.

 

but i prefer xing hock as i believe they give me good prices and good service. although waiting time is longer, the job is done properly. and furthermore i know ah jie and ah pin personally so it's easier to talk things out.

 

rather than go hou heng and use sign language to talk to the malay mechs. and ah hao doesn't seem interested to entertain me. and he's missing all the time. and everything that i ask the other mechs or the girl there (which always acts like i owe her money), they will refer me to ah hao, which will be missing or at the back of the shop doing don't know what.

[mystery rider]

Originally posted by heuer25@March 07, 2007 02:46 am

den if i change the whole engine bearing, oil seal, conrod, conrod bearing plus the piston and piston ring how much would be the estimated cost?? any idea guys?

Hmmm..

I think it around $500 if ur going to do in singapore...!

 

Jb i not sure!

 

BREAK DOWN PRICE!

TOP BLOCK!

PISTON=$70

RING=$45

PISTON BEARING=$15

without workmanship!

 

BOTTOM PART!

CON-ROD+EVERY BEARING+EVERY OIL-SEAL+COOLEN+GEAROIL+GASKET=at around $350 plus minus wif workmanship!

[guanjie]

Originally posted by fnee@March 07, 2007 02:57 am

but i prefer xing hock as i believe they give me good prices and good service. although waiting time is longer, the job is done properly. and furthermore i know ah jie and ah pin personally so it's easier to talk things out.

 

rather than go hou heng and use sign language to talk to the malay mechs. and ah hao doesn't seem interested to entertain me. and he's missing all the time. and everything that i ask the other mechs or the girl there (which always acts like i owe her money), they will refer me to ah hao, which will be missing or at the back of the shop doing don't know what.

i agree on the part where they shoot each other and can totally understand why.. but thats not really the issue in question lol

 

as for the lady.. she's the wife of ah hao.. yea she looks scary.. today was the first time she smiled at me lol.. maybe i look more yandao after a haircut

 

as for the mechanics.. i used the adviced from another forumer(give them cigarettes) and it works like magic.. lol

 

maybe im always there at the right time though.. for the 5-6 times ive been there ah hao is always around..

 

prices wise, i guess all shops there plus minus all the comes down to the same..

 

btw.. i think i saw u @ plaza sing last weekend @ starbucks.. walked past and caught a glimpse.. with 2 chais.. nt sure though

[mystery rider]

Originally posted by Powieee@March 07, 2007 02:28 am

guanjie , you bought your bike from a fellow SP forum-er right ?

Wah! you know the "come dragon go veins" of tis bike...!

kekeke!

[guanjie]

Originally posted by mystery rider@March 07, 2007 03:04 am

Hmmm..

I think it around $500 if ur going to do in singapore...!

 

Jb i not sure!

 

BREAK DOWN PRICE!

TOP BLOCK!

PISTON=$70

RING=$45

PISTON BEARING=$15

without workmanship!

 

BOTTOM PART!

CON-ROD+EVERY BEARING+EVERY OIL-SEAL+COOLEN+GEAROIL+GASKET=at around $350 plus minus wif workmanship!

wuah.. top up another $850 can buy new bike liao... lol

comparing the prices listed here with jb i think its almost definite jb is cheaper.. don't count items, worksmanship most likely to be cheaper liao..

[guanjie]

Originally posted by mystery rider@March 07, 2007 03:07 am

Wah! you know the "come dragon go veins" of tis bike...!

lol.. he's the zong of sp forums le.. no kick for him to remember such trivial details

 

btw,

compfused: i just got back to camp earlier(tue).. if u want the break free oil i can spare u 200-300ml.. cannot carry so much out in one shot.. if guard duty personnel spot check holland already

[mystery rider]

Originally posted by guanjie@March 07, 2007 03:08 am

wuah.. top up another $850 can buy new bike liao... lol

comparing the prices listed here with jb i think its almost definite jb is cheaper.. don't count items, worksmanship most likely to be cheaper liao..

Hmmm..

i am not sure about tat!

sorry i am just a rider!

Think maybe JB over-haul cheaper...

I think mostly the ppl here go HOCK XING at AGL rite?

 

btw $1400 can buy SP meh?

how old is the bike?

[guanjie]

Originally posted by mystery rider@March 07, 2007 03:14 am

Hmmm..

i am not sure about tat!

sorry i am just a rider!

Think maybe JB over-haul cheaper...

I think mostly the ppl here go HOCK XING at AGL rite?

 

btw $1400 can buy SP meh?

how old is the bike?

the prices u quoted earlier was $850 ma.. so + $850 = $1700

 

alot of ppl selling $1500-$1800 now... low season.. to think that just a while ago demand was high and supply was low

[mystery rider]

Originally posted by guanjie@March 07, 2007 03:11 am

lol.. he's the zong of sp forums le.. no kick for him to remember such trivial details

 

btw,

compfused: i just got back to camp earlier(tue).. if u want the break free oil i can spare u 200-300ml.. cannot carry so much out in one shot.. if guard duty personnel spot check holland already

Who?

u mean Powieee is the zong of sp forums?

 

Powiee is a she rite?

[mystery rider]

Originally posted by guanjie@March 07, 2007 03:17 am

the prices u quoted earlier was $850 ma.. so + $850 = $1700

 

alot of ppl selling $1500-$1800 now... low season.. to think that just a while ago demand was high and supply was low

No...

prices i quoted earlier is $500 singapore dollar!

[heuer25]

Originally posted by guanjie@March 07, 2007 03:08 am

wuah.. top up another $850 can buy new bike liao... lol

comparing the prices listed here with jb i think its almost definite jb is cheaper.. don't count items, worksmanship most likely to be cheaper liao..

ok. thanks for the info! =)

 

conrod and conrod bearing must be expensive rite?

[voodoopinko]

Wah Powiee is being known as a "SHE" LOLS.....

[guanjie]

alamak.. i added ur $500 to your $350 below.. lol my bad.. poor reading skills...

[mystery rider]

Originally posted by guanjie@March 07, 2007 03:22 am

alamak.. i added ur $500 to your $350 below.. lol my bad.. poor reading skills...

oic!

 

btw nice talking here wif ppl riding SP...!

:cheer:

[fnee]

Originally posted by guanjie@March 07, 2007 03:06 am

btw.. i think i saw u @ plaza sing last weekend @ starbucks.. walked past and caught a glimpse.. with 2 chais.. nt sure though

don't worry. i'll highlight this issue to ah pin. i don't really like this danny guy too. i'm going in tomorrow afternoon to overhaul my wave. knn buy one bike overhaul one time. arghhhh.

 

i wish i had 2 chais with me at starbucks man. haha. it wasn't me. been a long long time since i went out with girl/girls alr. sad ):

 

SG do top overhaul (polish block/change piston/piston ring + misc gasket, oil seal etc) alr $300 plus.. top and bottom overhaul should cost more than $600 including workmanship.

 

while in JB, doing the same stuff you did in SG would cost you most to most 1200RM. maybe can even get a recondition block too.

[guanjie]

Originally posted by voodoopinko@March 07, 2007 03:21 am

Wah Powiee is being known as a "SHE" LOLS.....

almost everyone whom avatar's of a female is known as a she..

 

the other sbf(sammyboy) also liddat.. msn also liddat.. thats where all the friggin disillusioned people gets gratification outta the people of the same sex

[Powieee]

I'm a he , she's my girl . And i'm no zong , tang tang bu ci .

 

guanjie : i thought johnson bike was in quite good con , how come you want to change so many things ?

[compfused]

Originally posted by guanjie+March 07, 2007 03:11 am-->

QUOTE (guanjie @ March 07, 2007 03:11 am)

btw, compfused: i just got back to camp earlier(tue).. if u want the break free oil i can spare u 200-300ml.. cannot carry so much out in one shot.. if guard duty personnel spot check holland already[/b] Ok..Thanks man..Maybe PM me your no. or somethin? So next time I go woodlands I call or SMS you..What block you stay?

[LimHammett]

hey guys..

 

any of u looking for a sp single seater fairing pls pm me. ive never used it before eversince i bought it in august. its white in colour. going for 50 bucks..

 

pm me if u r interested.

 

friedfish: i got a stock footrest. may let it go if ur friend still need it.

 

[Redz]

oh oh....was going to start my bike just now...

my choke has been tough to pull...so need abit of extra force to pull...

but just now, i pulled...the WHOLE thing came off..i mean, the wire broke..

i can see that the wire is already quite old..

how much to replace the choke ah?