Honda NSR150SP Riders

[A3roSmith]

Originally posted by bgoy@Jul 5 2004, 06:21 PM

Hi guys,would like to ask something..I just buang my SP and had to change a few things.

1.right balancer

2.Front brake lever

3.rear brake lever

4.adjust fork

5. throttle cable

All for around 95 bucks...do u think its ex?

Btw, how much does a rear brake lever cost?

Thanks:)

balancer costs 10 bucks each side

front levers costs 5-7 bucks each side...

adjust fork = ??? if just normal adjustment (up/down) should be free... if its bent... dont know how much to fix bent fork

throttle cable 10-15 bucks

 

dont know about rear lever but cant be THAT ex right... unless u r replacing the whole kata, the triangular portion then i nothing to say. the prices i quote are average... lab can get cheaper.. no way is it anywhere near 95 bucks...

[A3roSmith]

kena chopped lah.

[ZLord]

Originally posted by A3roSmith@Jul 5 2004, 07:56 PM

kena chopped lah.

haha ask them go ah koon do...

[bgoy]

Originally posted by A3roSmith@Jul 5 2004, 07:54 PM

balancer costs 10 bucks each side

front levers costs 5-7 bucks each side...

adjust fork = ??? if just normal adjustment (up/down) should be free... if its bent... dont know how much to fix bent fork

throttle cable 10-15 bucks

 

dont know about rear lever but cant be THAT ex right... unless u r replacing the whole kata, the triangular portion then i nothing to say. the prices i quote are average... lab can get cheaper.. no way is it anywhere near 95 bucks...

hmmm...from wat u say then price shldn't be so ex

 

no choice, dunno where to go repair...hehe...bought from universal motors so went back to them...

 

maybe see i new rider and dunno anything so kenna chop lor

[d0n]

Originally posted by ZLord@Jul 5 2004, 07:44 PM

so your 3rd 2b bike is sp?

1st is SP

2nd is Wave

3rd is Krr

[d0n]

Originally posted by ZLord@Jul 5 2004, 07:46 PM

haha his family also so jialat ar? or you too fierce liao? like loanshark

i went up to his hse only when he decided not to reply my sms nor entertain my phonecalls

keep saying busy w/ work

kaoz

he wasnt at home when i went his hse

but i talk nicely to his parents

ended up where was dat @$@^%$^5???

outside par tor

like that called WORK..........

hm..some pple is eat hard dont eat soft one

to make them move...u need to show them who's harder

[d0n]

Originally posted by ZLord@Jul 5 2004, 07:50 PM

he rich mah...wahahahhaa :cheeky:

oh nonono

cause had problem w/ my SP last time

seriously no power thou it drinks petrol like some 2A bikes like that

so decided to save money and get a wave

wave was goood...but power limited also

so nxt comes krr

[d0n]

Originally posted by bgoy@Jul 6 2004, 03:07 AM

hmmm...from wat u say then price shldn't be so ex

 

no choice, dunno where to go repair...hehe...bought from universal motors so went back to them...

 

maybe see i new rider and dunno anything so kenna chop lor

alamak

do liao then dont ask ard liao mah

later regret etc

[ZLord]

Originally posted by bgoy@Jul 6 2004, 03:07 AM

hmmm...from wat u say then price shldn't be so ex

 

no choice, dunno where to go repair...hehe...bought from universal motors so went back to them...

 

maybe see i new rider and dunno anything so kenna chop lor

its normal...when i bought my sp...i also tend to go back to the shop i bought it from repair...nevermind slowly you will learn

[ZLord]

Originally posted by d0n^@Jul 6 2004, 08:57 PM

oh nonono

cause had problem w/ my SP last time

seriously no power thou it drinks petrol like some 2A bikes like that

so decided to save money and get a wave

wave was goood...but power limited also

so nxt comes krr

so hows your krr so far? balance between the 2?

[ZLord]

Originally posted by d0n^@Jul 6 2004, 08:54 PM

i went up to his hse only when he decided not to reply my sms nor entertain my phonecalls

keep saying busy w/ work

kaoz

he wasnt at home when i went his hse

but i talk nicely to his parents

ended up where was dat @$@^%$^5???

outside par tor

like that called WORK..........

hm..some pple is eat hard dont eat soft one

to make them move...u need to show them who's harder

whhaahhahaa ah beng leh...but its a brave and smart move !! :thumb:

[Non Stop Racing]

how does the bike shop does reloan ? can explain ? lets say i say 3k then he pay me 2k full cash.. then the 1k reloan from shop..how is the process, ani old bird care to elaborate..

[ZLord]

Originally posted by Non Stop Racing@Jul 7 2004, 06:03 AM

how does the bike shop does reloan ? can explain ? lets say i say 3k then he pay me 2k full cash.. then the 1k reloan from shop..how is the process, ani old bird care to elaborate..

i think the shop will pay you 1k cash first...then the person buying the bike from you will calculate the interest with the shop and then start paying the instalments after everything is settled

[fooz]

do u guys lower the handlebar of sp?

isit possible to diy?

 

 

btw, wats the purpose of it aniway?

[A3roSmith]

Originally posted by fooz@Jul 7 2004, 05:36 PM

do u guys lower the handlebar of sp?

isit possible to diy?

 

 

btw, wats the purpose of it aniway?

ask ur mech to do it if no experience cos must be aligned zun zun

takes abt 10-15 min

some pple just prefer it lower, personal preference

[manowar]

Hi anyone has the manual for sp150??

[fooz]

Originally posted by A3roSmith@Jul 7 2004, 07:30 PM

ask ur mech to do it if no experience cos must be aligned zun zun

takes abt 10-15 min

some pple just prefer it lower, personal preference

ok thks!

 

guez i wun do it den... since it serves no porpose..

[d0n]

Originally posted by ZLord@Jul 6 2004, 11:50 PM

so hows your krr so far? balance between the 2?

erm

cant really much compare between the 2

cos my NSR was quite bad

engine got power

moi flen tested compression for me

but the power canot transfer to the wheels leh

so effectively...my bike has a loss of power problem

 

comparatively..my kips no power loss problem

but has a somewhat difficult to get biting point problem

haiz

[d0n]

Originally posted by ZLord@Jul 6 2004, 11:51 PM

whhaahhahaa ah beng leh...but its a brave and smart move !! :thumb:

ah beng??

nooo not meeee~~~

it's the previous owner

 

if u want to describe...im only more guai lan than him

but all in all

i still lugi one pipe and racing footrest

sianz

[d0n]

Originally posted by ZLord@Jul 7 2004, 10:03 AM

i think the shop will pay you 1k cash first...then the person buying the bike from you will calculate the interest with the shop and then start paying the instalments after everything is settled

make sure u take the 2K cash frm the fella 1st

den go motordiam do the reloan + ownership transfer

when reloan is done...shop will issue u a cheque for 1k

[ZLord]

Originally posted by fooz@Jul 7 2004, 05:36 PM

do u guys lower the handlebar of sp?

isit possible to diy?

 

 

btw, wats the purpose of it aniway?

when i bought my sp from shop...the handlebar is already lowered...basically i not really very sure whats the difference as have not tried riding with the normal handle bar height...but heard some people say cornering better

[ZLord]

:help:

my sp got knocking sound...especially everytime i start my bike...usually after warmup liao then the knocking sound gone...people say due to my clutch plate and housing...must change liao...isit true?

my sp also very hard to kick to neutral gear when fully stop at red light...in fact sometimes so hard to kick the gear when fully stop at red light...only when i moving to a stop then easy to kick to neutral...i just changed my engine oil few days ago...

last problem...my handle bar seems to vibrate alot...ride around 20km my hand can feel numb liao...any reasons why? any remedy?

[ZLord]

Originally posted by d0n^@Jul 7 2004, 08:09 PM

ah beng??

nooo not meeee~~~

it's the previous owner

 

if u want to describe...im only more guai lan than him

but all in all

i still lugi one pipe and racing footrest

sianz

ya loh should have donated the pipe and racing footrest to me...i need a footrest...best is can get back stock footrest...the current footrest i using now is chiong 1...damn sianz

[aEGo2]

Originally posted by ZLord@Jul 8 2004, 12:16 AM

:help:

my sp got knocking sound...especially everytime i start my bike...usually after warmup liao then the knocking sound gone...people say due to my clutch plate and housing...must change liao...isit true?

my sp also very hard to kick to neutral gear when fully stop at red light...in fact sometimes so hard to kick the gear when fully stop at red light...only when i moving to a stop then easy to kick to neutral...i just changed my engine oil few days ago...

last problem...my handle bar seems to vibrate alot...ride around 20km my hand can feel numb liao...any reasons why? any remedy?

i tink most of the sp got this clutch housing prob i dun tink it will affect the bike but its irritating. u go change liao the prob will still come back .

 

2b bike is lidat one la u get used to it can liao after a while i starting oso lidat.

[bgoy]

Originally posted by ZLord@Jul 8 2004, 12:16 AM

:help:

my sp got knocking sound...especially everytime i start my bike...usually after warmup liao then the knocking sound gone...people say due to my clutch plate and housing...must change liao...isit true?

i got tt knocking sound too...but i guess its harmless bah