Honda NSR150SP Riders

[louisyhw]

LC Tong 350 i like:lovestruck::lovestruck:

 

the one in my carpark...

 

http://i17.photobucket.com/albums/b66/louisyong/abcdefg.jpg

[wait4me]

wa engine ice on a sp ..

[jeffyee]

LOL...i ride every where the temp gauge always show bellow 3/8 ...

but when q at the custom there sure slowly slowly go up 4/8....den i touch theradiator area there,its hot......

after that i switch off the engine let it cool down....its it normal?

[blazingleaf]

i've got alot of problems for my second-hand SP.. 3day old now.

1) white smoke is never ending and alots..like you barbecue spray water on the charcoal when its hot.

2) quite hard to start from cold..got 1 time i with my fren tried to start for abt an hour..in the end i push the bike and he trottle to start.

3) when started . can hear a 'wongwongwong' sound with the 'bopbopbop' sound when idling..after traveling .. stop on traffic light.. sound lighter.. den when i think wheres the 'wongwongwong' sound .. den i try to trottle again, barbecue smoke again and 'wongwongwong' sound come back..or when i travel for ard 5k rpm can hear wongwongwong sound , drop abit its gone.. trottle again 5k plus wongwongwong.

4) its VEry noisy.. peaaaaaah peahhhhhpehhhhhh.. all passerby look at me .. very paiseh..

 

1)Maybe need tuning?

2)got try pull the choke?

3)not sure what kind of sound is that, but sp during like 4-5k rpm will like jerk right? aft 5.5 or 6, the valve will open den become smoother =)

4)either tong or u rev lower lor xD

 

sorry may not be able to help much

 

you can read here too =) created by lao jiaos. haha

 

http://z13.invisionfree.com/NSR150SP/index.php?showtopic=1

[blazingleaf]

anyone know how to change high beam n low beam? cos my sp now is opposite =.= changed the bulb nvr check properly =(

[Fried Rice]

just passed my tp. just rode my sp for the first time. its a 2nd hand bike. and i got problems kick starting it.

 

need to turn throttle while kicking starting it?

 

any experience and advice to give to me?

 

thank you

[fong]

just passed my tp. just rode my sp for the first time. its a 2nd hand bike. and i got problems kick starting it.

 

need to turn throttle while kicking starting it?

 

any experience and advice to give to me?

 

thank you

 

is normal like tat i guess =/ or pull choke ? haha

[jeffyee]

anyone know how to change high beam n low beam? cos my sp now is opposite =.= changed the bulb nvr check properly =(

 

got that probem mean infront socket there connect wrong d...

need to reconnect back ...if i not wrong your socket there got people cut before...u can DIY,check the wire and connect back,

there got 3 wire connect to the socket,1 wire is common wire and 2 wire connect to the switch,u just exchange that switch wire....

if u donoe how to connect just ask mech do it for u lo...

[jeffyee]

just passed my tp. just rode my sp for the first time. its a 2nd hand bike. and i got problems kick starting it.

 

need to turn throttle while kicking starting it?

 

any experience and advice to give to me?

 

thank you

 

bro if u keep kick but still cannot start,it can be the fuel overflow....just switch off your ignition ,turn the fuel control to OFF and keep kick few time(no need turn your throttle) then switch ignition ON after that it should be easy to start already...if do that still hard to start ,den u just let mech check for u lo...

[xbfish]

All right, my clutch plate got overheat that's why explain the high temperature. When I went to change engine oil, the oil was like .....

[ahduck]

All right, my clutch plate got overheat that's why explain the high temperature. When I went to change engine oil, the oil was like .....

 

u must be racing with ur gears while lane splitting causing it to overheat.

 

oil black in colour?

[jhaozz]

ar...it's so borin. supper ani1? hehe...

 

duck ar...tml go ur hse?

[blazingleaf]

got that probem mean infront socket there connect wrong d...

need to reconnect back ...if i not wrong your socket there got people cut before...u can DIY,check the wire and connect back,

there got 3 wire connect to the socket,1 wire is common wire and 2 wire connect to the switch,u just exchange that switch wire....

if u donoe how to connect just ask mech do it for u lo...

 

cos i changed the light wiring, anyway the thing dam mafanz. you need flexible hands also...

 

now my left is ok. right is opposite. tml i go try fix again haha. at night hard to see

[craz_03]

ar...it's so borin. supper ani1? hehe...

 

duck ar...tml go ur hse?

 

this sentence sounds so gay.. lolx....

[xbfish]

u must be racing with ur gears while lane splitting causing it to overheat.

 

oil black in colour?

 

Yes oil is black in colour. Hmm, what is racing with my gears? Haha I just go as per normal when lane splitting.

[Fried Rice]

is normal like tat i guess =/ or pull choke ? haha

 

very ma fan leh.. if always can't start, i will be late for sch haha:cheeky:

 

bro if u keep kick but still cannot start,it can be the fuel overflow....just switch off your ignition ,turn the fuel control to OFF and keep kick few time(no need turn your throttle) then switch ignition ON after that it should be easy to start already...if do that still hard to start ,den u just let mech check for u lo...

 

hmm okay:thumb:, i shall keep this in mind, thanks!

[Vans89]

Selling SP Carb

 

http://www.singaporebikes.com/forums/showthread.php?p=6035013#post6035013

[AkalaPovic]

 

very ma fan leh.. if always can't start, i will be late for sch haha:cheeky:

 

 

 

hmm okay:thumb:, i shall keep this in mind, thanks!

 

Sometimes its just the kicking technique.. used to be worried abt the same stuff lol.. but after like some practice , kick starting the bike usually is 1 to 2 tries at most.

[ahduck]

Selling SP Carb

 

http://www.singaporebikes.com/forums/showthread.php?p=6035013#post6035013

 

ur marchesini rims..

[Fried Rice]

Sometimes its just the kicking technique.. used to be worried abt the same stuff lol.. but after like some practice , kick starting the bike usually is 1 to 2 tries at most.

 

sometimes i keep trying until many times also cannot sia..

so troublesome

why no electric start hahah

[jokerdefar]

i think juz pull choke...comfirm easy start for me during cold weather^^

[AkalaPovic]

 

sometimes i keep trying until many times also cannot sia..

so troublesome

why no electric start hahah

 

Haha u'll get used to it.. kick start then cool leh lol.. thats why so many ppl riding sp ma

 

i think juz pull choke...comfirm easy start for me during cold weather^^

 

Agreed. Pull choke + dun open throttle and just kick

[blythe]

 

sometimes i keep trying until many times also cannot sia..

so troublesome

why no electric start hahah

 

haha u got money then u can mob to electric start nothing is impossible!

[fx110]

 

sometimes i keep trying until many times also cannot sia..

so troublesome

why no electric start hahah

the hole is there, c u want use or not

http://img.photobucket.com/albums/v205/fx110/motor/Open/200711181115.jpg

http://img.photobucket.com/albums/v205/fx110/motor/Open/200711181114.jpg

 

Electri-start operating

http://smg.photobucket.com/albums/v205/fx110/?action=view&current=Electricstart1.flv

http://smg.photobucket.com/albums/v205/fx110/?action=view&current=Electricstart.flv

 

sometime i feel want put back a kick start, Electri-start just adding your bike load(weight and power)

[vtec88]

Hi all, anyone know the below person ? he buy a sp rear seat frrom me.

 

stay in masiling and work as a bartender.

 

just wanna shame him here!!!

 

bro,

wat goes around come around!!!

sell u one seat,deliver to the place u want,yet u do like that.

 

taking ppl hard earn money is no fun...i got business expenses and a family to feed.

 

LOW LIFE this fellow!!!

Long story but in short he "RUN AWAY" with my $30.

 

HP: 9115-0813

 

anyone know him?

pls PM me .

 

cos i believe some of u guys know him...ask him to tranfer me the $$.

 

never seen someone who do so low for $30.

 

 

 

Hi vtec88 can i know do your have a used SP150 rear sit for sale, if you have any PM me the price please .

 

Thank you !

Edited December 13, 2009 by vtec88