SYM GTS200 group

[danielsin2]

Which shop u did overhaul bro?..Daniel do u have oem fairing pgm4?

 

I did mine at bikeworks.

 

Nope No fairings leh. All my stuff gave to new owner Alr. Going for inspection ah? Haha

 

Sent from my C6603 using Tapatalk 2

[danielsin2]

I need to change my con rod and the stuff by it self cost 300+ excluding labour

 

Labour shldnt be that ex. Unless they are out to chop you. If you and the shop are quite close the Labour will be quite cheap haha.

 

Sent from my C6603 using Tapatalk 2

[jason_lbs]

Welcome Jason!!!

 

Feel free to discuss any issue in this grp. We have a few knowledgeable members here

 

Regarding the FC, it always depends on each throttle style.

I managed 380 km for full tank , not throttle over 6.2k rpm or travel @ 90 kmh

 

If your bike is new, you shd see an increase in FC after proper run in.

If used bike, some members commented that a change in Air filter shall do the trick.

 

Beside you interested in Alex's Yss rear shocker ar. So fast wanna Cheng/upgrade your bike?

 

 

Thanks for Dominictsk for the reply, i just realize my Gts 200 does not have air filter,

 

i think i should get one.

[jason_lbs]

Hi all,

 

anyone respray your GTS 200 before ?

 

how much does it cost ? any recommended shop ?

 

I bought my used GTS 200 year 2005 , look old .

 

wanna make it shine again.

 

please help

[MIGHTY MAX]

I did mine at bikeworks.

 

Nope No fairings leh. All my stuff gave to new owner Alr. Going for inspection ah? Haha

 

Sent from my C6603 using Tapatalk 2

Yup..inspection coming...

[weilun]

How much my exhaust can sell less then 1mth old

[Dominictsk]

Hi Jason,

 

Based on online prices, its around 380++ for scooter, one colour. detailed pricing need to check with shop directly.

 

Hi guys,

 

Anyone can recommend me which tire and size good for our scooter? I'm changing my first set of wheel soon ; )

 

Thanks in advance!!!

[jason_lbs]

How much my exhaust can sell less then 1mth old

 

stock exhaust ?

[jason_lbs]

Hi Jason,

 

Based on online prices, its around 380++ for scooter, one colour. detailed pricing need to check with shop directly.

 

Hi guys,

 

Anyone can recommend me which tire and size good for our scooter? I'm changing my first set of wheel soon ; )

 

Thanks in advance!!!

 

 

Hi Dominictsk, thanks for reply.

 

wow $380 for paint job, which shop you recommended ?

 

im using metzeler tyre (since may), the quality ok.

[weilun]

stock exhaust ?

 

Yes stock i thinking of buying the GPR

[cheeko]

anyone have 2nd hand SYM Joxmax 300 to let go?

[Ezfishing]

Dear Riders..

 

My office has relocated which will now cost me much more to drive and thus looking at riding as an alternative. I've been doing some reads in this forum and am now contimplating between SYM GTS or the EVo. I have not ride for more than 10 years and am looking at a ride that is more friendly to maintenance and fuss free. My previous ride was a vespa and that machine gave me trouble free ans most parts are simple engineering. Looking at bikes technology nowdays, and the "progress" made, I am looking for recommendation between the 2 model and of course the best bang of the buck... Looking for some senior and experience riders here to help me in deciding between the 2.. Thank You

[gpan]

After 2 weeks of no riding, my bike would start! Lights and horn worked ok but starter would just click and whirl but unable to start engine....lucky my neighbour has a battery charger and after 10 hours of charging, it's good to go! I tried to kick start but no joy.

Must check the battery voltage tomorrow just to be sure the battery is holding the voltage well enough....

[gpan]

How's the new white lights? Any pictures?

[jason_lbs]

Yes stock i thinking of buying the GPR

 

Hi weilun

 

The GPR must be expensive, some of my friend say $600 +

share the experience after you installed.

 

Great day

[melvyndb]

After 2 weeks of no riding, my bike would start! Lights and horn worked ok but starter would just click and whirl but unable to start engine....lucky my neighbour has a battery charger and after 10 hours of charging, it's good to go! I tried to kick start but no joy.

Must check the battery voltage tomorrow just to be sure the battery is holding the voltage well enough....

 

Lucky you managed to figure out about the battery issue and a neighbour who has a battery charger..!! haa... but how come your kick start could not work? You mean it does not even start the engine or no kick start pedal? Because dominic tried and he mentioned no problem after 1 to 2 tries...

[melvyndb]

How's the new white lights? Any pictures?

 

I didn't took any photos, but the guy who installed for us did.

 

http://www.singaporebikes.com/forums/showthread.php/343965-lt-CMO-gt-White-Bulb-amp-Cree-Specialist?p=7981091&viewfull=1#post7981091

 

but it was on an afternoon, so can't judge on the quality of the white light... could reference from other bikes taken on the night on his page.

 

Our bulbs are H7 Diamond White 5200k(6000k)

[weilun]

Hi weilun

 

The GPR must be expensive, some of my friend say $600 +

share the experience after you installed.

 

Great day

 

They quote me $750 for GPR LTA approved, i think this will be the last i put maybe start wit Dr pulley and the MRA xcreen 1st.. Anyone any idea where to get the MRA x-Creen?

[jason_lbs]

They quote me $750 for GPR LTA approved, i think this will be the last i put maybe start wit Dr pulley and the MRA xcreen 1st.. Anyone any idea where to get the MRA x-Creen?

 

Hi weilun,

can share where you will go to install the Dr pulley (Taihin)?

and where you get the quote me for GPR LTA approve ?

 

im also interested :-)

[weilun]

Hi weilun,

can share where you will go to install the Dr pulley (Taihin)?

and where you get the quote me for GPR LTA approve ?

 

im also interested :-)

 

Scooter Narcotics and taihin u can do all.

[Rubbermouse]

Hey guys, just wondering if you guys wanna have a mini gathering again? Maybe next week?

[gpan]

I tried kick starting for about 5 mins...even started to perspire! So unglam, haha. So quit and took the bus. But confirmed its battery as been riding (and starting) for last 2 days, no problem. Will monitor battery and also try to ride more often, maybe at a minimum once a week...to ensure that battery is charged.

 

Lucky you managed to figure out about the battery issue and a neighbour who has a battery charger..!! haa... but how come your kick start could not work? You mean it does not even start the engine or no kick start pedal? Because dominic tried and he mentioned no problem after 1 to 2 tries...

[Dominictsk]

Gpan, you got too many ride le la. Haha ; )

 

Hi weilun, Dr pulley clutch, clutch bell and varietor cost 780. qouted by taihin.

 

The White light is not bad, Throw of light is shorter as compared to the stock one, however high beam machiam Shooting for BATMAN!!!

hahaha

 

Not bad to high beam those nasty drivers once a while ;p

[gpan]

Too many rides? Maybe...have a bicycle too, haha.

Your high beam is like mine then!! I wonder if its the bulb or can be adjusted...

 

Gpan, you got too many ride le la. Haha ; )

 

Hi weilun, Dr pulley clutch, clutch bell and varietor cost 780. qouted by taihin.

 

The White light is not bad, Throw of light is shorter as compared to the stock one, however high beam machiam Shooting for BATMAN!!!

hahaha

 

Not bad to high beam those nasty drivers once a while ;p

[jason_lbs]

Scooter Narcotics and taihin u can do all.

 

Thanks man, for the info.

 

great day.