[Group] YAMAHA Fazer

[zinc1]

yep look neater

[MC21]

Originally posted by zinc1@Oct 9 2005, 12:52 PM

yep look neater

okie!

[MC28]

Originally posted by MC21@Oct 9 2005, 10:59 AM

bro so how tmr? still on?

Can confirm with you tml which day i free this coming week..Tml most likely cannot..

[MC21]

Originally posted by MC28@Oct 9 2005, 12:53 PM

Can confirm with you tml which day i free this coming week..Tml most likely cannot..

ops ok lor u let mi know again..

[orangefazer]

Originally posted by zinc1@Oct 9 2005, 12:42 PM

that one need to drill hole for the fairing. my friend don't do that sorry. if you wanna do you can do it yourself

To Bigman ,

 

I think u shd check with the other FZ1 riders if they fixing on fender or

near handlebar. If fix handlebar , then maybe need cup to cover up the

wires .

 

My voltmeter sometimes funny . Once gave me reading of 9 . i panic.

Later i switch off engine and restart , then give me 12.5 . My normal

reading is usually between 11.5 - 12.5 Only when ride hard , i tend to

hit 13 ++

 

[zinc1]

i think your connect to the head light not the ignition.

[orangefazer]

Originally posted by zinc1@Oct 9 2005, 01:15 PM

i think your connect to the head light not the ignition.

I haven't really checked the wirings as voltmeter was fixed by previous owner.

 

Funny readings or not - it is a worthwhile investment. To any others who hasn't got one fixed yet , now is the best time since the MO still on . Go for it !

 

 

Cheers !

 

[mokamoka]

if you tap from anywhere else other then the battery, you will get a lower readings... even normal riding, the voltage should be about 13.6V... max is 14V at 5k RPM...

 

your voltmeter is tap from the ignition, therefore it is of a lower voltage... drilling a hole in the side fender makes it look neater, but then unless you have properly donr your water proving, water will seep in and spoil your electronics...

[zinc1]

not many ppl wanna drill a hole in the fairing.

[zinc1]

Autoguage smoke voltmeter mess order.

 

prices voltmeter $38

if need the cup $4

if need installation $6

 

so those interested in getting voltmeter

pls state if you need the cup and if you need installation.

i be passing the voltmeter and installation on 15oct afternoon in clementi blk 329

 

1) Ernie25 (Organiser) 97933700 (eg. wi cup) $42 paid.

2) senate747

3) bigman185 Installation(w/o the cup)

4) MC21 (cup n installation) 98453424 $48 paid

5) rs4meter,plus cup,plus installation.. (will transfer by tomolo afternoon)

6) yong74

7) maxxmadness

8) gabng

9) moregas

10) tazguan

 

pls transfer the money to my acct 062-38919-2 POSB. (i will order once i recevied all the money)

after that pls give me a sms

pls tansfer before 14oct 10am so i can buy the things after that

[zinc1]

just for the info the above voltmeter i saw outside the shop at sunshine plaza is $44, no cup holder or installation

[bigman_185]

Autoguage smoke voltmeter mess order.

 

prices voltmeter $38

if need the cup $4

if need installation $6

 

so those interested in getting voltmeter

pls state if you need the cup and if you need installation.

i be passing the voltmeter and installation on 15oct afternoon in clementi blk 329

 

1) Ernie25 (Organiser) 97933700 (eg. wi cup) $42 paid.

2) senate747

3) bigman185 (Installation + cup)

4) MC21 (cup n installation) 98453424 $48 paid

5) rs4meter,plus cup,plus installation.. (will transfer by tomolo afternoon)

6) yong74

7) maxxmadness

8) gabng

9) moregas

10) tazguan

 

pls transfer the money to my acct 062-38919-2 POSB. (i will order once i recevied all the money)

after that pls give me a sms

pls tansfer before 14oct 10am so i can buy the things after that

[zinc1]

Autoguage smoke voltmeter mess order.

 

prices voltmeter $38

if need the cup $4

if need installation $6

 

so those interested in getting voltmeter

pls state if you need the cup and if you need installation.

i be passing the voltmeter and installation on 15oct afternoon in clementi blk 329

 

1) Ernie25 (Organiser) 97933700 (eg. wi cup) $42 paid.

2) senate747

3) bigman185 (Installation + cup) $48 paid

4) MC21 (cup n installation) 98453424 $48 paid

5) rs4meter,plus cup,plus installation.. (will transfer by tomolo afternoon)

6) yong74

7) maxxmadness

8) gabng

9) moregas

10) tazguan

 

pls transfer the money to my acct 062-38919-2 POSB. (i will order once i recevied all the money)

after that pls give me a sms

pls tansfer before 14oct 10am so i can buy the things after that

[Ichiro_Masaaki]

Originally posted by mokamoka@Oct 9 2005, 04:46 PM

if you tap from anywhere else other then the battery, you will get a lower readings... even normal riding, the voltage should be about 13.6V... max is 14V at 5k RPM...

 

your voltmeter is tap from the ignition, therefore it is of a lower voltage... drilling a hole in the side fender makes it look neater, but then unless you have properly donr your water proving, water will seep in and spoil your electronics...

totally agree, mine is always 13.8 at 5k rpm, not more than tat even ride till 150 km/h...

[mokamoka]

Originally posted by orangefazer@Oct 9 2005, 01:22 PM

I haven't really checked the wirings as voltmeter was fixed by previous owner.

 

Funny readings or not - it is a worthwhile investment. To any others who hasn't got one fixed yet , now is the best time since the MO still on . Go for it !

 

 

Cheers !

 

if you are interested to check the wirings, its onli a 5 min thing to determine if your meter is fixed properly.

 

The one colour digital voltmeter onli has 3 wores, black, red and yellow.

The yellow is connected to the positive of the battery.

The black is connected to any grounding point.

The red is connected to any electrical connection which has a current when the ignition is switch on. e.g. ignition, headlight, position light...etc

 

if your connection is otherwise, then you are not going to get even close to accurate readings of your battery voltage.

[mokamoka]

For the guys who are getting the voltmeter for the MO, good for you. This is a very gd investment, which will inform you that your bike is running in gd condition, mainly stator is working and rectifier is working.

 

For those that are interested to DIY, here are the instructions.

The one colour digital voltmeter onli has 3 wores, black, red and yellow.

The yellow is connected to the positive of the battery.

The black is connected to any grounding point.

The red is connected to any electrical connection which has a current when the ignition is switch on. e.g. ignition, headlight, position light...etc

 

The extra things that you need are just more wires if you need to extend to reach your battery connections. Some U-clips for you to fix on the connections to the terminals of your battery. These things should not cost more then S$2 from Sim Lim Square.

 

Take this opportunity to learn more about the bike so that in the event that you are stranded out there in malaysia, you still know how to disable all these power draining devices.

[orangefazer]

Originally posted by mokamoka@Oct 10 2005, 01:04 AM

For those that are interested to DIY, here are the instructions.

The one colour digital voltmeter onli has 3 wores, black, red and yellow.

The yellow is connected to the positive of the battery.

The black is connected to any grounding point.

The red is connected to any electrical connection which has a current when the ignition is switch on. e.g. ignition, headlight, position light...etc

 

The extra things that you need are just more wires if you need to extend to reach your battery connections. Some U-clips for you to fix on the connections to the terminals of your battery. These things should not cost more then S$2 from Sim Lim Square.

 

Moka ,

 

U make it sound so easy. I'll save this info in my PC. Thks

 

[GT Fazer]

Erm... anybody getting the digital voltmeter in the MO? How much ah?

[MC21]

Originally posted by GT Fazer@Oct 10 2005, 01:59 AM

Erm... anybody getting the digital voltmeter in the MO? How much ah?

think this MO is only for analog one.. maybe u can check with ernie for the price of digital one..

[orangefazer]

Originally posted by MC21@Oct 10 2005, 09:12 AM

think this MO is only for analog one.. maybe u can check with ernie for the price of digital one..

 

Hi . Mornnig.

 

I think he is referring to the other thread.

 

http://www.singaporebikes.com/forum/index....ic=34144&st=150

 

However the price is more ex.

[MC21]

yo guys! wanted to check with u all, how do i make a u-turn via 2nd link to go to the mobil station to pump petrol?? not very familiar with the road there..

[James996]

Originally posted by MC21@Oct 10 2005, 05:32 PM

yo guys! wanted to check with u all, how do i make a u-turn via 2nd link to go to the mobil station to pump petrol?? not very familiar with the road there..

After u pay the malaysia toll,u go straight and turn left at the first exit.follow the road(quite straight,ard 5mins)u will rch a traffic light junction.U-turn there and follow the way back to the highway.U will rch the back to singapore petrol kiosks in ard 5 mins time,topup and will be on yr way back to singapore.

[James996]

When u want to go?I may want to go in tonite.Running low on petrol liao.But still nt decide 1st or 2nd link.

[Ichiro_Masaaki]

Yo bros went down to Clark Quay made a survey.. lots of parking space in the carpark 3rd storey, happening but no satay club cause the middle part close for reno, but hooters is now at ground floor with open space sittings, hence tot of organising a trip to HOOTERS look at chio and sexy babes.. How? if agree i'll start

 

http://forum.singaporefazerclub.com/viewtopic.php?t=462

 

[Ichiro_Masaaki]

Originally posted by James996@Oct 10 2005, 06:22 PM

When u want to go?I may want to go in tonite.Running low on petrol liao.But still nt decide 1st or 2nd link.

yo when yr next pumping tis week?