Yamaha FJR1300

[bandit298]

http://www.tcbbrakesystems.com/index.html

 

btw, just came across this on the net. Anyone noes abt this? Issit already in sg? Prob good for the older makes, new ones already have abs

[Aah_heng]

Bro, u can checkout M1 Motoring, Dexing, Speedway (Toh Guan), Excell Motor (Shun Li Indstl, Kaki Bukit). I've surveyed this few shops to get quotation & comparison. Price varies from one shop to another. Look for installment percentage too if u intend to buy with installment. Price would range between 23k-24k.

Me & my fren (4 of us) bought together from Dexing at one go, so we managed to bargain a good deal.

Infact most shop got the bike from Hong Leong (Yamaha Agent). I believe only Loois Motor brings in parallel-import FJR2013, so its not covered under HL warranty.

 

Bro...u mean 33-34k right? Lol.....if 23-24 means our deal is not good liao....lol

[Aah_heng]

Looks like quite a few new fjr riders....let's meetup soon....next fri night?my contact is 97691688....

 

Meetup next fri 5/4/2013 9:30pm onwards loc tbc

 

1) aah_heng 97691688 fjr 2013

2)

3)

[Aah_heng]

Looks like quite a few new fjr riders....let's meetup soon....next fri night?my contact is 97691688....

 

Meetup next fri 5/4/2013 9:30pm onwards loc tbc

 

1) aah_heng 97691688 fjr 2013

2)

3)

[mambo914]

Bro...u mean 33-34k right? Lol.....if 23-24 means our deal is not good liao....lol

 

Oooppss....Sorry. I mean 33k-34k. Ha..ha...overlook a single-digit there..

[elfian46]

Looks like quite a few new fjr riders....let's meetup soon....next fri night?my contact is 97691688....

 

Meetup next fri 5/4/2013 9:30pm onwards loc tbc

 

1) aah_heng 97691688 fjr 2013

2)

3)

 

can i join too.... ? but i riding gen 2 06 model.....

[PolarisX]

Bro, u can checkout M1 Motoring, Dexing, Speedway (Toh Guan), Excell Motor (Shun Li Indstl, Kaki Bukit). I've surveyed this few shops to get quotation & comparison. Price varies from one shop to another. Look for installment percentage too if u intend to buy with installment. Price would range between 23k-24k.

Me & my fren (4 of us) bought together from Dexing at one go, so we managed to bargain a good deal.

Infact most shop got the bike from Hong Leong (Yamaha Agent). I believe only Loois Motor brings in parallel-import FJR2013, so its not covered under HL warranty.

 

Oooppss....Sorry. I mean 33k-34k. Ha..ha...overlook a single-digit there..

 

Ahhh... kk thanks alot for the info bro! Hahaha, wha when I saw 23-24k, I was like WHAT?!! Hahaha... yeah 33-34k looking quite steep, might have to look @ second hand market...

[jimmyvfr]

hey Jimmy,how's ur speedo backlight now? better?

 

btw mine is a '03, n its mostly at 3 bars if riding in sg day time with traffic. Sumtimes goes up to 4, when kenna stuck in crappy jams. Only stays at 2 when its night or cruising at around 100-120. Also flushed coolant n changed a busted radiator cap after a thailand trip.

 

Okie gd..mine LED now okie... since most of u is 3 bar normal... then mine shld be normal.....Lucky..if not pocket burst again repairing.. Thks Bro bandit298....

[Aah_heng]

can i join too.... ? but i riding gen 2 06 model.....

 

Of cos.....just put yr name into the list.

[bandit298]

darn this week i cant, but hoping to go up north with all u fellow fjr riders soon!

[jasonyeo123]

same I cannot too

[fw78j]

Hi, ck here I jus got a fjr 2008 version, do u have the trouble shoot manual can email me ? Cos it got this shift_47 error thks

[fw78j]

Hi can anyone guide me I jus got a fjr and it keeps giving me error like abs blinking n shift _47 what the f is that any one can help I am ck

[Corse]

Hi all! I've been eyeing the FJR for the past 1 year as my next bike. Mighttt be upgrading this year end... anyone care to share whats the current price (all in) @ Hong Leong for the 2013 model? Anywhere else selling first hand, and whats the price?

 

I'll be looking at the first hand price, before deciding. If not will buy second hand... haha. Hope to join the community soon!

 

Bro, u can checkout M1 Motoring, Dexing, Speedway (Toh Guan), Excell Motor (Shun Li Indstl, Kaki Bukit). I've surveyed this few shops to get quotation & comparison. Price varies from one shop to another. Look for installment percentage too if u intend to buy with installment. Price would range between 23k-24k.

Me & my fren (4 of us) bought together from Dexing at one go, so we managed to bargain a good deal.

Infact most shop got the bike from Hong Leong (Yamaha Agent). I believe only Loois Motor brings in parallel-import FJR2013, so its not covered under HL warranty.

 

I JUst Bought My 2013 FJR. Just took it out yesterday from S.K Cycle. Few shops before Dexing. Got it for $33,500 (excluding insurance). HL Quote me $34,500 (excluding insurance if i remember correctly)

[Aah_heng]

Congrats bro corse for joining the FJR community!! Great choice!!I'm now torturing myself in the run in phase.....Lol

[Corse]

Looks like quite a few new fjr riders....let's meetup soon....next fri night?my contact is 97691688....

 

Meetup next fri 5/4/2013 9:30pm onwards loc tbc

 

1) aah_heng 97691688 fjr 2013

2)

3)

 

Congrats bro corse for joining the FJR community!! Great choice!!I'm now torturing myself in the run in phase.....Lol

 

Thanks Bro. I'll see if i can make it this fri as well.

 

 

 

Meetup Fri 5/4/2013 9:30pm onwards loc tbc

1) aah_heng 97691688 fjr 2013

2) Corse 97478949 FJR 2013

3)

Edited April 2, 2013 by Corse

[DaBonz]

Hi, ck here I jus got a fjr 2008 version, do u have the trouble shoot manual can email me ? Cos it got this shift_47 error thks

 

got this off the web

 

[h=3]The SH_47 error[/h][TABLE=align: left]

[TR]

[TD][TABLE]

[TR]

[TD=align: center][TABLE]

[TR]

[TD=align: center] [TABLE]

[TR]

[TD=align: center]http://atrophy.lock.net/pi/fjr//tmp/0_20080906034.jpg[/TD]

[/TR]

[TR]

[TD=align: center]The SH_47 error display[/TD]

[/TR]

[/TABLE]

[/TD]

[/TR]

[/TABLE]

[/TD]

[/TR]

[/TABLE]

[/TD]

[/TR]

[/TABLE]

This error, and a flashing ABS light, occurred while returning home from a local shop. Since the bike was running OK, I rode back home, took the photo, and decided to ride to the dealer to get his take.

Having turned off the ignition, I found the bike would not re-start.

I then found out that the error was listed as: "Braking signal is not detected while braking" and "No braking signal is received by MCU (motor control unit) when vehicle is braking".

Since it seemed to be a braking related problem, I decided to check the brake switches; so, ignition on, front brake lever pulled, check brake lights are on, OK.

Then release front brake lever - brake lights still on!

It soon became evident that the rear brake lever was not releasing properly. On lubricating the brake lever, all systems back to normal.

No problem since.

[confusehaha]

Hi bros riding fjr, mind sharing some tips and advice on what should i look out for upon viewing the bike? Is a 06 model btw.

 

Thanks in advance guys.

[zasrock]

Hi guys. I would love to meet up with some of fjr kakis for kopi and sharing session. I normally topup my petrol on friday night at jb. Anyone would be interested to join?

[kmkoon]

Hi guys. I would love to meet up with some of fjr kakis for kopi and sharing session. I normally topup my petrol on friday night at jb. Anyone would be interested to join?

 

For me I like to go in on Sunday night, whether is full or not full..

Sometimes I go in Friday if really run out of petrol

If u happen to see a silver color fjr with yellow FU plate, give me a horn

[Corse]

Sorry aah_heng. I have something on this Fri Night.

Probably next time.

 

Meetup Fri 5/4/2013 9:30pm onwards loc tbc

1) aah_heng 97691688 fjr 2013

2)

3)

[DaBonz]

Hi bros riding fjr, mind sharing some tips and advice on what should i look out for upon viewing the bike? Is a 06 model btw.

 

Thanks in advance guys.

 

Same thing as any other CLS2 bike. Engine smoothness, signs of crashes/ major works etc. All electricals in order. On mainstand, rotate the rear tire and feel if smooth or not. Jus to see if the shaft and swingarm are ok. Test ride if you can. Also take a look at brake calipers, rotors.

 

If u decide to get, try and do maintenance. Change all the fluids (EO,brake,clutch,coolant) incl the shaft oil, EO filter, air filter, sync throttle body. Re-grease the shaft. If you have the budget lar to do all at once lar.. if not slowly do.

 

Hi guys. I would love to meet up with some of fjr kakis for kopi and sharing session. I normally topup my petrol on friday night at jb. Anyone would be interested to join?

 

For me I like to go in on Sunday night, whether is full or not full..

Sometimes I go in Friday if really run out of petrol

If u happen to see a silver color fjr with yellow FU plate, give me a horn

 

I pump on Sat at 2nd link. Black 09 FBD plate. FMC sticker on my rear top box.

[Corse]

Some info Sharing for the New FJR1300A Regarding Suspension. I'm writing this in case there are riders who are not aware about Suspension Setups. I've met amatures who was not aware and was adjusting it the wrong way and had themselves into accidents.

 

Where safety is concern, Suspension Settings are very improtant. Without the right setup, stability in cornering and heavy braking will be affected.

I've gain some experience from my previous 2 sports bike in order to have the bike cornering safely.

 

Likewise from my 1st hand previous sports bike R1'09 the front Pre-load was too soft and had some issues cornering especially on Cameron Highland.

 

My New FJR Front Sag was about 52mm. How I got this measurement,

Measure the suspension on main stand with the front wheel not touching the ground (e.g 183mm)

Then measure it again with the rider sitting on the bike with his whole weight, bounce the front suspension a little to set it(131mm).

183-131 = 52. From the info i gathered, too much sag & it should be roughly about 35mm-41mm. But right now i'm trying out a sag of 45mm.

Tighten Both front folk until u see only '1 line left' Intially there were 2 lines. Immediately i feel a big improvement and cornering was more stable and effortless. However, less sag means compression & rebound will be harder. Compression may not need to be softer(depends individual) However, the rebound needs to be softer, probably around 3 clicks(+- if necessary). It's important that the front rebound is quick(softer).

 

So here's my sharing about suspension setting.

Edited April 3, 2013 by Corse

[holywater85]

Hi guys, i have a pair of headlight protectors for Gen1 FJR, slightly tinted, 2pcs. letting go at $30. Drop me a PM if interested!

[kmkoon]

 

I pump on Sat at 2nd link. Black 09 FBD plate. FMC sticker on my rear top box.

 

i always go `1st link