Post all your enquires / comments / feedback here! Thank you!

[fenyan]

Hi

 

Do u hav ready stock of scorpion carbon endcan for cb400?

And does the price include installation plus inspection?

[Unique_Motorsports]

Hi

 

Do u hav ready stock of scorpion carbon endcan for cb400?

And does the price include installation plus inspection?

 

Yes, ready stock available at both our workshops.

 

Stainless Steel with carbon cap: $680

Titanium: $680

Carbon: $680

Titanium flame: $750

Price include installation.

 

You have to go for inspection on your own after installation.

[vincent54]

Hey. What is the price range for spraying Pearl white on x8 scooter?

[Unique_Motorsports]

Hey. What is the price range for spraying Pearl white on x8 scooter?

 

You have a PM.

[Felix27]

hi.. i see that u guys have stainless steel header for cb4... but do you guys have one for cbr4 instead..?

[Unique_Motorsports]

hi.. i see that u guys have stainless steel header for cb4... but do you guys have one for cbr4 instead..?

 

Sorry, no headers for CBR400.

[Oldboy]

Sorry for the delay. We had already tried our best in ordering the specific white wall tyre for you but apparently the distributor failed to bring it in, this is an area beyond our control.

 

Finally had the rear white wall installed. Good services and friendly staffs.

[Unique_Motorsports]

Finally had the rear white wall installed. Good services and friendly staffs.

 

Thank you for your understanding

[RAO]

Sweeeeeeeeet work on my Revo this morning guys!

[Unique_Motorsports]

Sweeeeeeeeet work on my Revo this morning guys!

 

Thank you for your support and feedback!

[aidi125]

hi to all....

 

yesterday was my very first time to UNIQUE MOTORSPORTS @ Kaki Bukit... I should say its the most superb outstanding excellent kind of service that i got... both mech and especially the malay sales personel are extremly frendly.....

 

the servicing of my bike was superb....

 

TO THOSE WHO HAVE NOT BEEN TO UNIQUE MOTORSPORTS AND TO THOSE WHO ARE NEW IN THE MOTOR INDUSTRIES, I HIGHLY RECOMMEND U GUYS GO TRY OUT @ UNIQUE MOTORSPORTS LOCATED @ KAKI BUKIT............ Thanks guys........

[Unique_Motorsports]

hi to all....

 

yesterday was my very first time to UNIQUE MOTORSPORTS @ Kaki Bukit... I should say its the most superb outstanding excellent kind of service that i got... both mech and especially the malay sales personel are extremly frendly.....

 

the servicing of my bike was superb....

 

TO THOSE WHO HAVE NOT BEEN TO UNIQUE MOTORSPORTS AND TO THOSE WHO ARE NEW IN THE MOTOR INDUSTRIES, I HIGHLY RECOMMEND U GUYS GO TRY OUT @ UNIQUE MOTORSPORTS LOCATED @ KAKI BUKIT............ Thanks guys........

 

Thank you for your support and feedback!

[YenYu]

Hi Unique,

 

Yesterday i when down to autobay kaki bukit branch to install my renthal handlebar, rizoma handgrip on my FZ16.

This morning, i accidentally broke the left handle switch, now i'm able to rotate up and down freely. I wasnt inform that they drill a hole onto the handlebar so that the inner of the switch which has a stud that can sit in the handlebar hole. Just now when back to UM, apparently the mech ask why i go and shift the thing and break it... It's not that i wan to right? It was just position differently from my previous stock condition. And the mech tried to fix it, so i thought there's still hope. But what I see? The mech go and cut a COKE ALUMINIUM CAN and put it in between the handle bar and the switch. Why the hell will that use that kinda stuff?! And HELLO? Aluminium cans? I doubt the aluminium can is even clean!? And i think, Aluminium wrap inbetween plastic switch and metal handlebar, isn't it making it more smoother and worst?! I was so shock he can actually use that kinda stuff from the dustbin. So i suggested to use some rubber, and he said rubber doesn't work... In my heart,i was like "Com'on?! There's so much friction on rubber, why the HELL it wont hold?!" If it doesn't, why people uses rubber material for Standing broad jump mats & Yoga mats? And the mech suggested to order a new switch from yamaha for me, if order a new switch, must well i go back to yamaha service center to do, why do i still go back to UM and look for you?

 

Seriously I was happy ytd, but till just now, I was really dissappointed with the case, and on top of that, the mech attitude is really not nice from ytd of installation till now... Seriously i can't take it... Indeed those sale manager is really good,kind and friendly, but this mech... I might think twice before going back to UM for doing additional stuff like installing new brake/clutch levers,tyres and even more in my mind due to not wanting to see the same mech.... I dont really know which mech is it... But his alittle fat, with 1.6+m height, tinted hair with parting... His tee isn't printed with name, so i dont know which. If u wan the name, i can go back to UM to ask. I think it's Wong or what one.. Sadly to say, I'm kinda disappointed.

 

I asked on of my FZ16 bros, he installed the renthal handlebar too, and same he broke the left hand switch, and this is wat he wrote to mi :

" normallyu the chunk of controls are mounted on the handle bar by means of a stud, that seats into a pre drilled hole on the handle bar.

the stud is pre-moulded with the control housing.

if that snaps, get the mechanical screw in a self tappered screw at the point where the stud originally is in, then cut of the head of the screw. and there you have it , a self improvised stud.

how i know ? cos thats what happened to mine "

 

I do not wan to disclose the names that wrote to me. But please kindly look into this matter.

Edited April 26, 2011 by YenYu

[Unique_Motorsports]

Hi Unique,

 

Yesterday i when down to autobay kaki bukit branch to install my renthal handlebar, rizoma handgrip on my FZ16.

This morning, i accidentally broke the left handle switch, now i'm able to rotate up and down freely. I wasnt inform that they drill a hole onto the handlebar so that the inner of the switch which has a stud that can sit in the handlebar hole. Just now when back to UM, apparently the mech ask why i go and shift the thing and break it... It's not that i wan to right? It was just position differently from my previous stock condition. And the mech tried to fix it, so i thought there's still hope. But what I see? The mech go and cut a COKE ALUMINIUM CAN and put it in between the handle bar and the switch. Why the hell will that use that kinda stuff?! And HELLO? Aluminium cans? I doubt the aluminium can is even clean!? And i think, Aluminium wrap inbetween plastic switch and metal handlebar, isn't it making it more smoother and worst?! I was so shock he can actually use that kinda stuff from the dustbin. So i suggested to use some rubber, and he said rubber doesn't work... In my heart,i was like "Com'on?! There's so much friction on rubber, why the HELL it wont hold?!" If it doesn't, why people uses rubber material for Standing broad jump mats & Yoga mats? And the mech suggested to order a new switch from yamaha for me, if order a new switch, must well i go back to yamaha service center to do, why do i still go back to UM and look for you?

 

Seriously I was happy ytd, but till just now, I was really dissappointed with the case, and on top of that, the mech attitude is really not nice from ytd of installation till now... Seriously i can't take it... Indeed those sale manager is really good,kind and friendly, but this mech... I might think twice before going back to UM for doing additional stuff like installing new brake/clutch levers,tyres and even more in my mind due to not wanting to see the same mech.... I dont really know which mech is it... But his alittle fat, with 1.6+m height, tinted hair with parting... His tee isn't printed with name, so i dont know which. If u wan the name, i can go back to UM to ask. I think it's Wong or what one.. Sadly to say, I'm kinda disappointed.

 

I asked on of my FZ16 bros, he installed the renthal handlebar too, and same he broke the left hand switch, and this is wat he wrote to mi :

" normallyu the chunk of controls are mounted on the handle bar by means of a stud, that seats into a pre drilled hole on the handle bar.

the stud is pre-moulded with the control housing.

if that snaps, get the mechanical screw in a self tappered screw at the point where the stud originally is in, then cut of the head of the screw. and there you have it , a self improvised stud.

how i know ? cos thats what happened to mine "

 

I do not wan to disclose the names that wrote to me. But please kindly look into this matter.

 

Thank you for your feedback.

[nee_savi]

Looking for stock FURUKAWA battery for my GRS 400. COuld u pls PM me how much it is .. also price of any other similar option

[Unique_Motorsports]

Looking for stock FURUKAWA battery for my GRS 400. COuld u pls PM me how much it is .. also price of any other similar option

 

You have a PM.

[chiaph]

how much does it costs to dismantle full body kits and parts for reassemble due to improper assembly from factory work. My model is yzf-r125.

[Unique_Motorsports]

how much does it costs to dismantle full body kits and parts for reassemble due to improper assembly from factory work. My model is yzf-r125.

 

You have a PM.

[fbb6610r]

boss do u hav coocase box n monorack bracket for super4 revo?

[Unique_Motorsports]

boss do u hav coocase box n monorack bracket for super4 revo?

 

You have a PM

[super_marvel]

Hi Unique, will you be opened this coming Monday? Just came back from overseas, and wish to go down to install the pre-ordered sprocket & chain asap.

[gohjlb]

Can quote me the price of CBF150 Ignition KeyHole part?

[Unique_Motorsports]

Can quote me the price of CBF150 Ignition KeyHole part?

 

 

Hi Unique, will you be opened this coming Monday? Just came back from overseas, and wish to go down to install the pre-ordered sprocket & chain asap.

 

You have a PM.

[Shamsui87]

Hi Um..i have a DRZ with 40,000 for the mileage..Any recomendations for the servicing..its a first hand bike which i have ridden for 2 years plus..thanx in advance for help..

[biting_point]

Thanks Unique for the wonderful work and patience on my DRZ yesterday evening..

Thumbs up and wonderful service every time..!!