Honda RVF400/NC35

[tth_jeff]

Originally posted by BuZZBeaM@Jan 5 2005, 06:16 PM

u did it at Sa**fu ??

Dun think Shay will go to that S**FU for any servicing same goes to me:nono: :nono:

[Shay]

Originally posted by tth_jeff@Jan 5 2005, 06:47 PM

Dun think Shay will go to that S**FU for any servicing same goes to me:nono: :nono:

Hahahaha..... You are right TTH.

That rvfian i was talking about is you lor but i dun wana mention names lah...but since you owe up yourself!

 

No.seriously, lez end the S**F* discussion here or we can continue on our Monthly Outings. I've heard of some blacklisted shops threatening to Sue forumers for 'defamation' when they posted thier unpleasant experience with the shop online to warn others.

 

For now...i think just expressing that we WOULD'NT go that shop ourselves is fine. Coz i think its a matter of personal taste and opinions. But for the protection of everyone, lez not discuss this further here.

[BuZZBeaM]

Originally posted by Shay@Jan 5 2005, 06:46 PM

Nope!

 

I wouldnt have anything good to say about that shop.

 

i went to my usual mech. Although it took 6 hours for the job to be done! but i saw him cleaning every nook and cranny of the forks internals.

 

Turns out not only me, a rvfian here and his gang used to patronise that shop u mentioned too but after awhile, all never go back liao.

 

U know why!

i tot u did it long ago...

hey im also a victim rem??? same issue with e fork seal leaking

[Xiao_Di]

Originally posted by WanNavaro@Jan 4 2005, 09:39 PM

RVF or Kawa ZXR?

 

which one to choose for a newly-passed 2A rider who has passion in Sportbikes?

:cheeky:

RVF the best :cheer:

[leo_rider]

Originally posted by Xiao_Di@Jan 5 2005, 08:35 PM

RVF the best :cheer:

[tth_jeff]

Originally posted by Shay@Jan 5 2005, 07:02 PM

Hahahaha..... You are right TTH.

That rvfian i was talking about is you lor but i dun wana mention names lah...but since you owe up yourself!

 

No.seriously, lez end the S**F* discussion here or we can continue on our Monthly Outings. I've heard of some blacklisted shops threatening to Sue forumers for 'defamation' when they posted thier unpleasant experience with the shop online to warn others.

 

For now...i think just expressing that we WOULD'NT go that shop ourselves is fine. Coz i think its a matter of personal taste and opinions. But for the protection of everyone, lez not discuss this further here.

Roger that... We will continue the next meet up:smile:

[GhostRider17]

Originally posted by tth_jeff@Jan 5 2005, 06:47 PM

Dun think Shay will go to that S**FU for any servicing same goes to me:nono: :nono:

same to tth jeff

[Cyanide14]

Hiz!

 

Juz asking if washing, tuning and synching of carbs in Ah Lai in Ubi is it good?

recommended?

Thanks!

[tth_jeff]

Originally posted by mika14@Jan 6 2005, 01:09 PM

Hiz!

 

Juz asking if washing, tuning and synching of carbs in Ah Lai in Ubi is it good?

recommended?

Thanks!

I dunno abt the place u mention. But i had mine done at Planet motor also at Ubi. Job was well done by a mech called Ah meng. U can try that shop. Look for Ah Meng.

[Non Stop Racing]

may i know wads synching of carbs ? my previous owner told me if the ilding keep jumping then its time for tuning alreadi. true ah ?

[leo_rider]

Originally posted by Non Stop Racing@Jan 6 2005, 07:43 PM

may i know wads synching of carbs ? my previous owner told me if the ilding keep jumping then its time for tuning alreadi. true ah ?

tat wat i heard also...

[Xiao_Di]

how much is synching the carbs

[eugene_kips]

Originally posted by Non Stop Racing@Jan 5 2005, 05:35 PM

guys i change my both side fork oil seal.. it cost 80 quote from mech, oil tank abit shakey, rear brake 1 light spoilt. ask him fix this . later he quote me 140$ . wad the fish ? he told me he put plastic each 10$ inside the tank wadeva.. is there such a thing ?

yo, been busy for a while din come in seems like a lot of happening.....

anyway duno if any help but I got my tank "rubbers" from FJT for $2 per piece, can DIY one.....

rearlights think also can DIY, just repair my rear light too.....

as for fork, last yeat service the forks at combine Ah kiong at $150.

 

well if you need any help can call/sms me @ 93680672

hope its of any help.

[eugene_kips]

Originally posted by Non Stop Racing@Jan 6 2005, 07:43 PM

may i know wads synching of carbs ? my previous owner told me if the ilding keep jumping then its time for tuning alreadi. true ah ?

some one told me that this maybe due to valve clearance as well.....duno abt this that well though, but haynes manual does recommend checking valve clearance before syncho-ing.

[Cyanide14]

Originally posted by tth_jeff@Jan 6 2005, 01:37 PM

I dunno abt the place u mention. But i had mine done at Planet motor also at Ubi. Job was well done by a mech called Ah meng. U can try that shop. Look for Ah Meng.

Hiz!

 

How much does your wash and synch(or juz only one) servicing?

Did u do valve clearance before?

[Non Stop Racing]

yo tks eugene.. sms u about the manual alreadi. see if u have anot, can lend me photostap. does 150$ servicing of fork include workmanship ?

[tth_jeff]

Originally posted by mika14@Jan 7 2005, 01:14 AM

Hiz!

 

How much does your wash and synch(or juz only one) servicing?

Did u do valve clearance before?

No i haven done my valve clearance. As for washing of carb its $80. Though its $70 outside but i will still prefer to go Planet. Going to do my valve clearance soon too. But as for synch and washing of carb is not necessary if nothing's wrong. But its still up to individual, for me i do my servicing frequently.

[y2kredbull]

Anyone here did valve clearance before?My mecha said have to leave bike for a few days.Is it true?How much?

[tth_jeff]

Originally posted by y2kredbull@Jan 7 2005, 09:16 AM

Anyone here did valve clearance before?My mecha said have to leave bike for a few days.Is it true?How much?

What i heard from my mech we will have to leave our bike there for a day or two.

[eugene_kips]

Originally posted by Non Stop Racing@Jan 7 2005, 02:57 AM

yo tks eugene.. sms u about the manual alreadi. see if u have anot, can lend me photostap. does 150$ servicing of fork include workmanship ?

Yah....included but it was 1 year ago with my RR....

hope the price has not changed.

 

anyway had reply to u rgds the manual.....

[eugene_kips]

think valve clearance had to leave bike overnite to cool down completely before can be done. is this correct? remember reading abt it somewhere....

[y2kredbull]

Originally posted by eugene_kips@Jan 7 2005, 11:28 AM

think valve clearance had to leave bike overnite to cool down completely before can be done. is this correct? remember reading abt it somewhere....

Yah,its written inside haynes manual.But how much estimated cost?

[y2kredbull]

Guys,i'm selling the fullface helmet shown in my signature.Details are in "Garage Sales".

[Non Stop Racing]

Originally posted by leo_rider@Jan 6 2005, 08:31 PM

tat wat i heard also...

eh leo, then do u know how to tell when is needed to do valve clearance or wash curb ?

[Shawn--]

Hi ! wads da stock sprocket size for this bike ? front n rear ..