[Group] YAMAHA RXZ

[toofaz]

amcm geng watz upz? it true wat bro toofaz reply coz his bike is standard inside out. even rxz wif chamber pipe tak leh gigit hiz bike.

 

jgn bobal ni mcm ar...paisey gue...tu sume nasib aje...

[toofaz]

wat u all mean by standard pipe inside out?? sound very chim...

 

wat it means is tat the pipe is using standard pipe as in no modification to the pipe itself plus the silencer also standard silencer meaning the silencer also has no modification...evryting standard original...save petrol bro...

[adyra]

wat it means is tat the pipe is using standard pipe as in no modification to the pipe itself plus the silencer also standard silencer meaning the silencer also has no modification...evryting standard original...save petrol bro...

 

macam yeye je. cakap je la motor kau motor mat rempit johor kan senang. step standard je. kalau standard pakai tayar 90/90 blakang 80/90 depan. airbox pasang balik. jetting pasang balik standard.

[strikeX105]

Hmm..by the way, what brand of 2t, 4t and petrol is value for money on a standard stock FG plate Japan rxz? mine is a 1989 model.

 

I'm using elf sport sp semi-synthetic 2t, fuch silkolene comp 4t racing 15w-50 and pump with shell power 92 or SPC 92..I never whack my rxz...

 

ok or not?

[toofaz]

macam yeye je. cakap je la motor kau motor mat rempit johor kan senang. step standard je. kalau standard pakai tayar 90/90 blakang 80/90 depan. airbox pasang balik. jetting pasang balik standard.

 

haha..mepek jer...tu namenye setting carb ajer per,mane aku ade porting sume,enjin pon tkde racing parts...kire standard la tu...bab tayar tu aku kurang kemampuan nk bli tayar yg mcm ko ckp tu ar, jadi aku bli tayar murah ajer...

[adyra]

haha..mepek jer...tu namenye setting carb ajer per,mane aku ade porting sume,enjin pon tkde racing parts...kire standard la tu...bab tayar tu aku kurang kemampuan nk bli tayar yg mcm ko ckp tu ar, jadi aku bli tayar murah ajer...

 

kau tu da senget nanti aku kasi lagi senget baru tau. hahahahaha.

 

1st point pasal kau nya setting memang nak kena pakai pipe standard ngan silencer original standard pasal kalau pakai silencer lain setting lari ataupun tak sedap.

 

2ndly kau nak kena pakai rim 18 ngan tayar sotong pasal tu la setting untuk rxz standard mod yg diiktirafkan oleh kaum2 mat rempit malaysia.

 

takkan kau tak tau tip2 ni sume? hahaah tak tau ke eksen tak tau. kalau eksen tu ok la. kalau kau tak tau memang kau bingai la lain kali bodek lebih2 ngan mechanic kau tu tapi tak tau apape.

 

standard tu ikut setting manufacture la dol. hahahaha carb tak kacau. airbox mane? terceceh kape? :lol:

[bloodybaguz]

jgn bobal ni mcm ar...paisey gue...tu sume nasib aje...

 

ape bobal2 ? aku bobal kao baru tao hahahahahah

paisey konon, kalo takde hidung dan mata keyro ke ok la paisey

[toofaz]

kau tu da senget nanti aku kasi lagi senget baru tau. hahahahaha.

 

1st point pasal kau nya setting memang nak kena pakai pipe standard ngan silencer original standard pasal kalau pakai silencer lain setting lari ataupun tak sedap.

 

2ndly kau nak kena pakai rim 18 ngan tayar sotong pasal tu la setting untuk rxz standard mod yg diiktirafkan oleh kaum2 mat rempit malaysia.

 

takkan kau tak tau tip2 ni sume? hahaah tak tau ke eksen tak tau. kalau eksen tu ok la. kalau kau tak tau memang kau bingai la lain kali bodek lebih2 ngan mechanic kau tu tapi tak tau apape.

 

standard tu ikut setting manufacture la dol. hahahaha carb tak kacau. airbox mane? terceceh kape? :lol:

hahaha..tapikn klau kite point balek aku ngah reply fellow forumer punye post bobal pasal PIPE AJER,jadi aku ckp inside out standard pipe...tapi skrg nampaknyer mcm da lari topic ni...aniway pe ko ckp tu ade btolnyer jgak bro adi:thumb:

[toofaz]

ape bobal2 ? aku bobal kao baru tao hahahahahah

paisey konon, kalo takde hidung dan mata keyro ke ok la paisey

 

mcm gitu ckp ok!haha:P

[MaverickRD]

kalau standard pakai tayar 90/90 blakang 80/90 depan. airbox pasang balik. jetting pasang balik standard.

 

Hey Bro adyra....

 

If ur rear wheel is 90/90... Does that mean its much wider than 90/80???

And also ur rims is wider eh??? Sori ah i'm still learning... :cheeky:

 

And This AirBox that you fixed back.... Is it the one below the seat???

(Cose my mechanic says there should something @ the entrance of the air filter) "sadly mine is missing that"

 

And finally, yang jetting tu ape ah??? hehehe

 

Thanks for clearing up my questions.... :thumb:

[adyra]

hahaha..tapikn klau kite point balek aku ngah reply fellow forumer punye post bobal pasal PIPE AJER,jadi aku ckp inside out standard pipe...tapi skrg nampaknyer mcm da lari topic ni...aniway pe ko ckp tu ade btolnyer jgak bro adi:thumb:

 

aku faham maksud kau. yela kau nak step standard je. ialah tu memang standard modification la katakan. tapi takpe uncle sam tahan pun tak leh buat pape kan. yg penting standard. tapi kalau standard rxz nak ajak kau main memang suka la ko.

[adyra]

Hey Bro adyra....

 

If ur rear wheel is 90/90... Does that mean its much wider than 90/80???

And also ur rims is wider eh??? Sori ah i'm still learning... :cheeky:

 

And This AirBox that you fixed back.... Is it the one below the seat???

(Cose my mechanic says there should something @ the entrance of the air filter) "sadly mine is missing that"

 

And finally, yang jetting tu ape ah??? hehehe

 

Thanks for clearing up my questions.... :thumb:

 

aku nya zek dah lelong dah lama.

90/90 ngan 90/80 tak sama.

no depan tu tyre section nominal width [mm]. next no tu tyre aspect ratio [%] kira pendek cerita tembok tayar. kalau nak lebih faham click link dibawah.

 

http://www.metzelermoto.com/web/products/technology/readingasidewall/default.page

 

airbox memang kat bawah antara seat ngan tank. kotak itam.

 

jetting tu benda2 dlm carb. kalau kau atau mechanic bukak carb untuk service tu dlm ade benda khazanah kat dlm tu panggil jetting.

 

kalau aku dapat projek lagi untuk zek, aku nak try pakai rim 2.5 blakang depan 2.15 jadi bleh sumbat tayar lebar sikit tak macam ade brader kita pakai tayar basikal. hahahaha

[toofaz]

aku faham maksud kau. yela kau nak step standard je. ialah tu memang standard modification la katakan. tapi takpe uncle sam tahan pun tak leh buat pape kan. yg penting standard. tapi kalau standard rxz nak ajak kau main memang suka la ko.

 

yesh..btol tu...pandai abg ady...yg penting sumenyer 'street legal'...500 siol...

[Muqaddimah]

My registration plate FD 7602 A had been stolen at marsling drive.The front and back registration plate both had been stolen.i dunno its a case of mischief or sabotage.but i got no suspect in mind n i had not make any enemies recently..im a safety rider on the road.please help keep a look out for my plate num FD7602A..THANX BRO N SISTERS!

[eddieastro79]

I looking for thing to upgrade my RXZ of you guy got things wants to sell can try pm me thanks .

[Phat_Boyd]

My registration plate FD 7602 A had been stolen at marsling drive.The front and back registration plate both had been stolen.i dunno its a case of mischief or sabotage.but i got no suspect in mind n i had not make any enemies recently..im a safety rider on the road.please help keep a look out for my plate num FD7602A..THANX BRO N SISTERS!

 

No problem beb...btw dah report blom..perkara mcm nie jgn ambik lewah...danger siot!!!

[shahur]

assalamualaikum to all Muslim...

i'm a newbie here and from m'sia...

i owned a rxz also..

can i join u all?

[adyra]

m'salam, can bro, no prob. btw u a malaysian or singaporean?

[cool_bikers]

Helo everyone, I'm new here and i have a used RXZ, its been a long time ever since i last ride a bike. Have a few question thou. Where can i find a reliable shop in jb dat can do some modification. Sumthing like re-bore, port and polish, skimming and also changing of some of the parts. Could anyone pls advice. Thk U guys.

[shahur]

i'm malaysian...

from kuantan pahang...

i'm a bit shock...

singapore also got many rxz lover eh?

[adyra]

i'm malaysian...

from kuantan pahang...

i'm a bit shock...

singapore also got many rxz lover eh?

 

yes indeed. it have been here long enough in singapore. so u riding here in singapore? where do u stay in sg?

[adyra]

Helo everyone, I'm new here and i have a used RXZ, its been a long time ever since i last ride a bike. Have a few question thou. Where can i find a reliable shop in jb dat can do some modification. Sumthing like re-bore, port and polish, skimming and also changing of some of the parts. Could anyone pls advice. Thk U guys.

 

in jb ah gua lane got lotsof shops. diff pple diff preferences. i always go to kok seng in ah gua lane.

[khaitronic]

in jb ah gua lane got lotsof shops. diff pple diff preferences. i always go to kok seng in ah gua lane.

 

Yeah kokseng the best...7k,Jalan Tun Abdul Razak, Susur 4, Johor Bahru,Johor.

Business Hour : 230 pm - 300am (OFF :Tuesday)

[shahur]

no no..

i'm not at sg..

still at my home town...

juz finding new frens with same interest..

 

[135]

u guys have this problem? when bike is cold just start early in the morning from 0 to 100 very easy. when around after noon when engine really hot i can't seem to go 100. stuck at 90 then i have to drop gear. any idea?

 

Hi faris, i heard from fellow frens tat wind temperature going to ur carb effect the engine performace too. I notice my bike will run smooth during the night than the day when the temperature is cool. But still i don't understand the theory tat much.

 

Juz my 2cents worth.