CBR150R Riders, Join us now!

[limbat]

Originally posted by gilerboy@January 12, 2007 09:52 pm

mileage only 42k + ma.. lol.. jus needed to tighten the cable.

towed my bike jus for tht.. sighs

 

 

wahhhhhhhhhhh say..............

[d0n]

Originally posted by gilerboy@January 12, 2007 09:52 pm

mileage only 42k + ma.. lol.. jus needed to tighten the cable.

towed my bike jus for tht.. sighs

lucky u! its only the clutch cable~

[gilerboy]

lol..

 

anyway.. anyone here riding a yellow CBR.. FZ plate. went near the IKEA Tampines ard 5pm plus?? saw u...

[cusster]

don u live cck ah i live cck cres my mileage already 52000km liao.. tink alot of stuff worn out but dunno how to check.. clutch pate is which part? how much air u guys pump ur front and back tyres? so sick of the rain sia.. keep on raining and raining..

[cusster]

guys.. today i check my rpm again.. at gear 6 7000rpm only 96kph leh.. like laggy so weird

[NaRuTo13]

Originally posted by cusster@January 15, 2007 11:43 am

guys.. today i check my rpm again.. at gear 6 7000rpm only 96kph leh.. like laggy so weird

maybe due to ur air fliter under fuel tank de dirty ba.. i juz change fliter and spark plug today.. think abt 8-10k km le lol.. that one as far i know dont change at first it will make random no power(sometime it will like no power to accelerate even when full throttle while sometime its alright).. worse is always no power if your one is same case as mine..

[ozzarhomb]

Originally posted by gilerboy@January 14, 2007 12:55 am

lol..

 

anyway.. anyone here riding a yellow CBR.. FZ plate. went near the IKEA Tampines ard 5pm plus?? saw u...

the bike got an ugly black box de ma? :cheeky:

[ozzarhomb]

Originally posted by d0n^@January 12, 2007 12:04 am

i agree w/ limbat

the problem most likely got to do with clutch cable or clutch plates

 

if clutch cable, probably cost u at most $20 to get it done

if clutch plates, probably ard $100+

 

the damage to yr wallet is still considered not extremely high

 

clutch plates got so expensive meh? my Super 4's clutch plates cost less than 100 bucks woah.

 

CBR150R parts should be cheap de since it's honda thailand. too bad last time i didn't get to change my clutch plates if not can have a gauge of the price. :smile:

[d0n]

Originally posted by ozzarhomb@January 15, 2007 03:30 pm

clutch plates got so expensive meh? my Super 4's clutch plates cost less than 100 bucks woah.

 

CBR150R parts should be cheap de since it's honda thailand. too bad last time i didn't get to change my clutch plates if not can have a gauge of the price. :smile:

hmz..thats juz a rough quote

 

but yr S4 clutch plates

[fabian]

Something happening just happened about 1 and half hour ago.At Yishun carpark.

just as i was leaving the carpark, i noticed a suspicious looking indian man walking around like a drunk and looking in the cars and motorbikes there.

 

I just pretend to leave and hide at one corner where he can't notice me and rang up the police.(too bad didn't see any of our bros)Hee!

 

For those whom had lost any of your parts due to theft,justice had been done.

That b*****d had pulled out an iu unit from an NSR.

Owner of FS4**0J, most likely your iu unit is at the yishun north police station right now.Would definitely be more pleased if you are one of the fellow-forumer.

 

[d0n]

Originally posted by cusster@January 14, 2007 02:31 am

don u live cck ah i live cck cres my mileage already 52000km liao.. tink alot of stuff worn out but dunno how to check.. clutch pate is which part? how much air u guys pump ur front and back tyres? so sick of the rain sia.. keep on raining and raining..

i'm at CCK central

heh

pic of my bike in my avatar

remember to wave to me when u c me on the road

 

clutch plates are located internally

cant c it frm outside w/o dismantling some other parts

 

anyway i guess some symptoms of clutch plate worn out could be:

- tend to encounter clutch slip when changing gears e.g. after changing into gear 3 suddenly the bike auto change back to gear 2

- loss of power

 

maybe other bros here can contribute??

anyway at gear 6 i could get 90km/h at 6K RPM

maybe yrs isnt that far off??

try to get some basic servicing done up 1st?

e.g. like what the other bros recommended: change air filter, engine oil, spark plug, etc

[HVAC]

So I see theres quit a cople of cbr riders, nice, anyone doing any racing? hope the pick of my bike shows, was taken during our anual 8 hour endurance race.

 

 

PS. where can 1 buy a service manual for the bike.????????????

[HVAC]

I cant see that the cbr would be heavy on cluth plates , I modified my race bike and supplied it with a slipper cluth, and widen the rims to 3.5 inc at back and 2.5 inc in front with white powder CBR 600 mono shock, and she turns like a Superbike, honda now how to make good bikes.

[STAP]

Originally posted by cusster@January 14, 2007 02:31 am

don u live cck ah i live cck cres my mileage already 52000km liao.. tink alot of stuff worn out but dunno how to check.. clutch pate is which part? how much air u guys pump ur front and back tyres? so sick of the rain sia.. keep on raining and raining..

i pump 190psi for front and back

[ozzarhomb]

Originally posted by d0n^@January 15, 2007 07:30 pm

hmz..thats juz a rough quote

 

but yr S4 clutch plates

mine is a rough quote too, cuz i changed many parts when i bought my S4 and clutch plates was one of them. anyway i sold off my S4 le and i'm starting to miss it already.

 

but i could vividly remember that my NSR SP's clutch plates cost 60 bucks when i changed it at SANFU about 2 yrs back so i will guesss that CBR150R's clutch plates will cost around the same as NSR's.

[ozzarhomb]

Originally posted by fabian@January 15, 2007 07:33 pm

Something happening just happened about 1 and half hour ago.At Yishun carpark.

just as i was leaving the carpark, i noticed a suspicious looking indian man walking around like a drunk and looking in the cars and motorbikes there.

 

I just pretend to leave and hide at one corner where he can't notice me and rang up the police.(too bad didn't see any of our bros)Hee!

 

For those whom had lost any of your parts due to theft,justice had been done.

That b*****d had pulled out an iu unit from an NSR.

Owner of FS4**0J, most likely your iu unit is at the yishun north police station right now.Would definitely be more pleased if you are one of the fellow-forumer.

 

Good Citizen!! well done my brother, regardlesss that guy is drunk or not he deserve to serve some time in changi. :smile:

[ozzarhomb]

Originally posted by d0n^@January 15, 2007 07:35 pm

i'm at CCK central

heh

pic of my bike in my avatar

remember to wave to me when u c me on the road

 

clutch plates are located internally

cant c it frm outside w/o dismantling some other parts

 

anyway i guess some symptoms of clutch plate worn out could be:

- tend to encounter clutch slip when changing gears e.g. after changing into gear 3 suddenly the bike auto change back to gear 2

- loss of power

 

maybe other bros here can contribute??

anyway at gear 6 i could get 90km/h at 6K RPM

maybe yrs isnt that far off??

try to get some basic servicing done up 1st?

e.g. like what the other bros recommended: change air filter, engine oil, spark plug, etc

a tell-tale sign that clutch plates is worn out is when u move upslope and u notice your speed decreasing although your RPM is maintained at the same level. this implies that the clutch is worn out and slipping already. :smile:

[d0n]

Originally posted by HVAC@January 15, 2007 08:45 pm

I cant see that the cbr would be heavy on cluth plates , I modified my race bike and supplied it with a slipper cluth, and widen the rims to 3.5 inc at back and 2.5 inc in front with white powder CBR 600 mono shock, and she turns like a Superbike, honda now how to make good bikes.

nice race bike u've got there~

[d0n]

Originally posted by ozzarhomb@January 16, 2007 09:41 am

mine is a rough quote too, cuz i changed many parts when i bought my S4 and clutch plates was one of them. anyway i sold off my S4 le and i'm starting to miss it already.

 

but i could vividly remember that my NSR SP's clutch plates cost 60 bucks when i changed it at SANFU about 2 yrs back so i will guesss that CBR150R's clutch plates will cost around the same as NSR's.

ic~

guess i need to adjust downwards my rough figure for clutch plates

[limbat]

Hey.....guys ............ I got a spare set of CBR150 clutch set & they are all together 9 pcs plus a gasket - so total 10 pcs set selling s$50 Honda Original set.

 

also have a spare set of front & rear spoket set also original Honda ......

 

[HVAC]

Good day ,so anyone that can help me with maintenince manual for I got hold off racing cams and stainless valves, but need torque settings before I can do the installation.

[gilerboy]

Originally posted by ozzarhomb@January 15, 2007 03:27 pm

the bike got an ugly black box de ma? :cheeky:

nope.. i don't think the person had a box..

[gilerboy]

Originally posted by limbat@January 16, 2007 12:29 pm

Hey.....guys ............ I got a spare set of CBR150 clutch set & they are all together 9 pcs plus a gasket - so total 10 pcs set selling s$50 Honda Original set.

 

also have a spare set of front & rear spoket set also original Honda ......

 

i think im interested in the clutch set.. and the sprockets also..

 

need to change mine

[miss]

Hi...

 

Any of you guys planning to sell away ur rack, base plate and box? Gonna fix them onto my cbr.... Do pm me if you are...

[limbat]

Originally posted by gilerboy@January 16, 2007 10:49 pm

i think im interested in the clutch set.. and the sprockets also..

 

need to change mine

 

 

call me if U need them 93891138.....