CBR150R Riders, Join us now!

[collectees]

  malik88 said:

if the BIKES lane is not jammed up, i'm going in through there.. any objections..? anything if lost @ causeway, just meet at JB immigration there after they chop passport..right b4 they "check" ur bike.. but someone lead first la..in JB then i lead.. hee..=D

 

don't la, all go through same lane together mah.. steady right?

 

we bikers got to look out for one another.

[malik88]

ok ok steady.. hehe.. so what time..? confirm again? and meet where.??

[collectees]

  malik88 said:

ok ok steady.. hehe.. so what time..? confirm again? and meet where.??

 

2pm, railmall. it's near the BKE exit, so easy for us to head up also.

[NaRuTo13]

  Red_Devils said:

Curious how much will our stock batt cost? Can share?

 

"while carb just 2-3mth back" What does this mean? Do you mean you changed carb 2-3mths back? Carb need to change 1 ah?

 

yeah i juz change my carb.. cos upon checking of carb.. it can be seen that the item in the carb is sort of eating up the covered surface.. its like a rubber (funnel) constantly moving up n down within a metal/silver cyclinder..

which result in unable to throttle past a certain speed and such in my case.. so i changed it..

 

no one will touch carb unless item such as spark plug , air cleaner (fliter) cant solve the problem..

[obeno]

..........

[obeno]

..........

[NaRuTo13]

  obeno said:

How much was it when you changed it? You mean the black plastic part is eating up the aluminium part????

 

i change the whole carb cost me 200+.. yeah if u open before the black pasic part eating aluminium. so it seem to become they cant co exist smoothly due to that.. which in turn having problem to speedo stuck at a certain speed even at full thorttling..

[Jenga]

  collectees said:

Derrick has not been replying to my SMSes. either he has left his SIM card with GF in JB again, or he has become a full fledge Johorian and we need to contact him on his JB number.

 

Wandi not free on Saturday, he only free on Friday after 6, but i got tennis.

 

We know Derrick cannot reach by phone so must get his attention through this forum. But haven't seen him for a while and he already indicate he needs to work both days in the weekend, if Wandi also needs to work then neither are free..

 

Anyways, permission has been granted so I'll be there. 2pm at Rail Mall tomorrow... Don't forget your passport... :cheeky:

[Jenga]

  cheese04 said:

thanks guy!!

quite a number of frinz commented cbr having small head and ugly...

anyway... i will still keep looking ard for this bike.. hahaha:cheeky:

 

In the end its about what you think of the bike and what are the options available. If you ask me, I also agree that larger bikes look better but with 2b license only so many options and then larger also means more weight and slower... I look around at larger bikes first also (CBF150, Pulsar 180) but cannot beat the power of CBR150 and you need this on the expressways... my 2cents:thumb:

[Red_Devils]

  malik88 said:

i think he meant service carb.. u know cleaning up of the carb..? i think that's what he means..

 

Oh. I see. Yes, I know. I just service my carb bout few weeks back. Thx

[Red_Devils]

  NaRuTo13 said:

yeah i juz change my carb.. cos upon checking of carb.. it can be seen that the item in the carb is sort of eating up the covered surface.. its like a rubber (funnel) constantly moving up n down within a metal/silver cyclinder..

which result in unable to throttle past a certain speed and such in my case.. so i changed it..

 

no one will touch carb unless item such as spark plug , air cleaner (fliter) cant solve the problem..

 

So you mean you change the whole carb which cost you 200+? Did you change to the stock carb? Or other brand?

[collectees]

Red Devil, may we have your confirmation if the time and place is ok with you?

[Red_Devils]

  collectees said:

i'm guessing you refill at shell. i refill at esso, which is on the way back. i think we shall go to shell first, then motorshop lane, then on the way back i'll go esso.

 

so i think can confirm Saturday meetup 2pm (depending confirmation for Red Devil if ok since he work till 1pm), heading to motorlane to do some maintenance, lunch, then refill.

 

Nominal roll as follows:

Malik (leading)

Ben (awaiting SMS confirmation)

Red Devil

Nils (please apply leave from boss)

Zed (backside)

 

anymore to add?

 

Im ok with that, but dono where is railmall. Hahahaha... Will check street directory.

[Red_Devils]

  collectees said:

Red Devil, may we have your confirmation if the time and place is ok with you?

 

Yes. I confirm will be there by 2pm. See you guys. .

[Red_Devils]

  collectees said:

Red Devil, may we have your confirmation if the time and place is ok with you?

 

The place we meet is Rail Mall or The Rail Mall?

http://www.streetdirectory.com/asia_travel/travel/enlarge/travel_id_7152/travel_site_119370/

[Jenga]

  Red_Devils said:

The place we meet is Rail Mall or The Rail Mall?

http://www.streetdirectory.com/asia_travel/travel/enlarge/travel_id_7152/travel_site_119370/

 

its the same thing, when u drive in just turn to the left and we'll be waiting at the first corner near coffeebean...

[Jenga]

  collectees said:

Red Devil, may we have your confirmation if the time and place is ok with you?

 

Zed, if any changes, pls message me, may not log into forum today....

[Red_Devils]

  Jenga said:

its the same thing, when u drive in just turn to the left and we'll be waiting at the first corner near coffeebean...

 

Ok. Thx. See you guys there..

[NaRuTo13]

  Red_Devils said:

So you mean you change the whole carb which cost you 200+? Did you change to the stock carb? Or other brand?

 

yeah change brand new.. stock de.. think about 220..

 

btw later u go malaysia with them help me check they got front sprocket for our bike or not ? front sprocket 14teeth ok?

 

if under sgd $20 help me buy 1 thx.. cos aftermarket one 15 teeth (our stock) cost $15 from my mech shop.. so i guess MY should even be cheaper..

 

1 of the mech told me 1 kind of wave in MY not available in SG is using the same type of sprocket not too sure.. if can pls help me check thx..

[Red_Devils]

  NaRuTo13 said:

yeah change brand new.. stock de.. think about 220..

 

btw later u go malaysia with them help me check they got front sprocket for our bike or not ? front sprocket 14teeth ok?

 

if under sgd $20 help me buy 1 thx.. cos aftermarket one 15 teeth (our stock) cost $15 from my mech shop.. so i guess MY should even be cheaper..

 

1 of the mech told me 1 kind of wave in MY not available in SG is using the same type of sprocket not too sure.. if can pls help me check thx..

 

Hope Collectees will help in looking for it, coz Im not too sure about bikes.

[malik88]

  NaRuTo13 said:

yeah change brand new.. stock de.. think about 220..

 

btw later u go malaysia with them help me check they got front sprocket for our bike or not ? front sprocket 14teeth ok?

 

if under sgd $20 help me buy 1 thx.. cos aftermarket one 15 teeth (our stock) cost $15 from my mech shop.. so i guess MY should even be cheaper..

 

1 of the mech told me 1 kind of wave in MY not available in SG is using the same type of sprocket not too sure.. if can pls help me check thx..

 

tmr i check for you the 14 teeth front sprocket.. as for buying, see if i got enough $$.. haha..! so its on huh 2pm at RAILMALL?

 

see everyone thr..! rain or shine huh..?

[collectees]

  malik88 said:

tmr i check for you the 14 teeth front sprocket.. as for buying, see if i got enough $$.. haha..! so its on huh 2pm at RAILMALL?

 

see everyone thr..! rain or shine huh..?

 

yes sir! see you tomorrow!

[Red_Devils]

  collectees said:

yes sir! see you tomorrow!

 

Btw, if raining how huh?

[Jenga]

  Red_Devils said:

Btw, if raining how huh?

 

depends...if heavily, we wait, softly, can wear raincoat...

[Jenga]

  collectees said:

yes sir! see you tomorrow!

 

Zed, do you have the HP numbers of all joining tomorrow? In case of any issues we need to be able to call each other...