CBR150R Riders, Join us now!

[obeno]

..........

[d0n]

for those going to DIY Stebel TM Magnum horns, please note that both horns can only fit on the right side.

 

i spent 4 hours trying to fit one on the left, can't get a good configuration. wasted my time, and now my back hurts.

 

right side can use the screws (size 8) for the coolant pump

left side, not much of choices. can try 1 of the 2 screws for the tensioner (size 8 or 10. forgot.)

but the problem w/ mounting the horns 1 side each is that it doesnt achieve a nice tone.

[whitefang]

thanks obeno and SparkerS1!!

 

playlife grips huh.. hear b4.. will reduce vibration and not so hard is it?? how much is it and which shop should i go to?

 

ya rewrap seats lor.. but i think gotta leave at the shop for a few days wan right??

 

so anyone going down to uncle lim's place this week?? to change bulbs?? hehe..

[whitefang]

U have to get the normal T10 meter bulb - brighter 1s will melt the holder & T10 LEDs High Power may not fit. I will help if i hv time ok - best to come with some of the boys, they veri helpful - so u organise a meetup at my place during the evening this week, otherwise i will be travelling till early June leow ................... cheers

 

uncle lim, other bikes can change to brighter ones but our bikes cannot ah?? how sad!

[whitefang]

maybe we should do an outing to go all the shops to get whatever we need, like horns, seats, and then go uncle lim's shops get bulbs together.. settle all at a shot in one day.. then go for kopi, relax, smoke, supper etc.. haha..

[lazy1000]

thanks obeno and SparkerS1!!

 

playlife grips huh.. hear b4.. will reduce vibration and not so hard is it?? how much is it and which shop should i go to?

 

ya rewrap seats lor.. but i think gotta leave at the shop for a few days wan right??

 

so anyone going down to uncle lim's place this week?? to change bulbs?? hehe..

 

u can try Eugene Saddlery at Jalan Bersah.. call him up and tell him when to expect u and it will take u a few hours..

just leave the bike there, let him rewrap the seats while u go makan, or mustafa to walk walk..

derrick and I did ours there.. and i think he did a rather good job..

my seats are on zed's bike now, maybe he can post a few pics to show u the seats..

 

and uncle lim, i think he wun be in sg this wkend or something??

 

PS: btw, Uncle Lim, thanks for today!! =)

[whitefang]

u can try Eugene Saddlery at Jalan Bersah.. call him up and tell him when to expect u and it will take u a few hours..

just leave the bike there, let him rewrap the seats while u go makan, or mustafa to walk walk..

derrick and I did ours there.. and i think he did a rather good job..

my seats are on zed's bike now, maybe he can post a few pics to show u the seats..

 

and uncle lim, i think he wun be in sg this wkend or something??

 

PS: btw, Uncle Lim, thanks for today!! =)

 

thanks bro.. how much did urs cost?? i shall chk up on the address..

 

go uncle lim's within this few weekdays!!!! my meters got no lights, i cannot see.. so dangerous..

[collectees]

The horn got no brand. Measured about 10cm in diameter. Did a horn loudness check with Zed. Us blasting away near an empty open field (it was fun). It was louder than stock but duller. Its noted that with two horn the loudness will be much enhanced. So, solution is, still struble horn pair is louder.

 

the Stebel Magnum comes as a pair. 1 plays the higher octave, while the other does the lower. on it's own, the high or low octave horn is slightly louder than stock, but it is together that a wider octave is achieved and you get the 'ommph'.

 

after constant horning from Wandi and Derrick, and my own DIY session on sunday, Ben's horn is nowhere near that of the Stebel. my believe is that what he got is basically a car's stock horn; a larger sized CBR150 horn that's only slightly louder.

[lazy1000]

thanks bro.. how much did urs cost?? i shall chk up on the address..

 

go uncle lim's within this few weekdays!!!! my meters got no lights, i cannot see.. so dangerous..

 

Eugene's Saddlery

Tel: 6293 3613

H/P: 9430 7471

 

I did mine for ard $55.

I did anti-slip material + a HONDA design on pillion's seat

[collectees]

right side can use the screws (size 8) for the coolant pump

left side, not much of choices. can try 1 of the 2 screws for the tensioner (size 8 or 10. forgot.)

but the problem w/ mounting the horns 1 side each is that it doesnt achieve a nice tone.

 

i just can find any position that will fit to close the fairing. without fairing, most positions are ok.

 

i'm not sure if you're also using the Stebel Magnum, but they're quite thick. i didn't hear much of a difference when i had them installed one on each side.

 

in the end i gave up putting the horns, cos i couldn't get them to fit and face the front with fairings on. i later learned from seeing Derrick's setup that it has to be both on the right side using pump screws, but facing down. also, it's super close to the exhaust. i'm surprised it didn't melt.

[collectees]

maybe we should do an outing to go all the shops to get whatever we need, like horns, seats, and then go uncle lim's shops get bulbs together.. settle all at a shot in one day.. then go for kopi, relax, smoke, supper etc.. haha..

 

maybe you can organize?

[collectees]

Eugene's Saddlery

Tel: 6293 3613

H/P: 9430 7471

 

I did mine for ard $55.

I did anti-slip material + a HONDA design on pillion's seat

 

do you mind if i changed the pillon seat to carbon fiber cloth? =P

[lazy1000]

do you mind if i changed the pillon seat to carbon fiber cloth? =P

 

No worries Bro.

Its urs to keep now anyway..

[collectees]

No worries Bro.

Its urs to keep now anyway..

 

itchy la... i like the extra cushion, so what i'll do is remove the current skin, get a transparent one and put the cloth underneath before i staple back!

[whitefang]

how abt this week in the evening for bulbs at uncle lim's place? maybe around 8 pm? cos he's not going to be in town till early june right?

 

so settle bulbs this week, then we organise another day to go shop for seats and horns and diy together followed by a meal??

[collectees]

so who needs to work and study? so at least i can get an idea??

 

i'm in school. but with one 2 hour lesson per day, some would hardly call it studying.

[whitefang]

i'm in school. but with one 2 hour lesson per day, some would hardly call it studying.

 

what cse u doing?? where?? not bad sia!

[limbat]

maybe you can organize?

 

how abt this week in the evening for bulbs at uncle lim's place? maybe around 8 pm? cos he's not going to be in town till early june right?

so settle bulbs this week, then we organise another day to go shop for seats and horns and diy together followed by a meal??

 

I second ................... all are welcome ............. but hor ger also must DIY ..........

[whitefang]

i dun mind DIY-ing if got pple teach.. if no one teach then uncle lim must teach me liao.. hahaha..

[d0n]

i just can find any position that will fit to close the fairing. without fairing, most positions are ok.

 

i'm not sure if you're also using the Stebel Magnum, but they're quite thick. i didn't hear much of a difference when i had them installed one on each side.

 

in the end i gave up putting the horns, cos i couldn't get them to fit and face the front with fairings on. i later learned from seeing Derrick's setup that it has to be both on the right side using pump screws, but facing down. also, it's super close to the exhaust. i'm surprised it didn't melt.

 

yup, im using stebel magnum 2.

i suppose the newer batches come w/ brackets of slightly different length as compared to mine.

need to do some trimming around the edges of the bracket using wire cutter/plier before u can fit them to the coolant pump area.

show u how i mount mine next time~

tink agar can see where the horns are from my avatar pic.

[Red_Devils]

did not login, then miss this already.

 

Same here, miss this again.

[Red_Devils]

ITS HERE GUYS! haha.. it is to my satisfaction.. except got a few bulbs need to change.. speedometer bulb not working lah! haha.. wanna look for uncle lim.. uncle lim u got sell bulbs for meters right???

 

and red_devils, u got sch tmr? i shall try to park right next to urs.. haha..

 

 

Sorry for replying late. Just back to town. Me always got morning class 9-12. See u soon.

[Red_Devils]

Guys, the CL Final is tmrw 2:45 midnite. Anyone?

 

Zed, where should we watch?

[ronnymetal007]

hellow all, i'm ronny, from jakarta, indonesia. .i have a cbr150 too..

 

i want to ask something about rear tyre..i use BT45 front tyre on it...

it still bumpy and sliding when i get cornering at circuit,..

do you have any idea what type and brand i must bought for my rear tyre?

 

and,what size of standard cbr150 carb?

26mm or 28mm??

can i change it to non-vacuum type ex: Keihin PE-24?..

how about the effect to engine?will i get more responsive engine?get more horsepower???most of my friend change it to PE28,but i thought that spec. is too big for cbr150..

 

many thanks for all of you

salam dari jakarta:)

[collectees]

yup, im using stebel magnum 2.

i suppose the newer batches come w/ brackets of slightly different length as compared to mine.

need to do some trimming around the edges of the bracket using wire cutter/plier before u can fit them to the coolant pump area.

show u how i mount mine next time~

tink agar can see where the horns are from my avatar pic.

 

avatar pic so small, can't see anything...