CBR150R Riders, Join us now!

[collectees]

MO for CBR150 exhaust endcan. Started 11/12/08, ends 28/12/08, collection 28/01/09.

 

Part number 18310-KPP-910 for older bike without key-shutter. Price $58 including government profit.

1) Shaun the 'whitefang'

2) ZR the 'cpt'

3) Derrick the 'thisisme'

 

Part number 18310-KPP-930 for newer bike with key-shutter. Price $64 including government profit.

1) Zed

2) Richard the 'limbat'

 

Encan only, does not include header. $30 deposit to be collected. I will only be organising this MO once since i won't be buying a new exhaust for the next few years.

[Cpt.ZR]

that one has very good ventilation. hence the price difference

 

501st post! 2A!

 

hahah woohooo welcome to the 2a club LOL..

 

that one the food quality is much nicer also la. haha.. you all can also come to np's canteen to eat also right?

 

 

wooo.. can't wait till tmr doing the tensioner and DIY session.

 

Final call for all those who are following me... please include your name at the list.. and repost it so i will take note. if not i will assume that there is no one following me. Final call. List will close at 530pm. anything else i might not be able to read due to my faulty internet @ home. so please follow up.

[Cpt.ZR]

===================Rendezvous Point.=========================

 

Ok ok. To all that is attending the DIY. Cpt.ZR be the person bringing you all to zeds garage. Look out for a silver CBR with NO FAIRING. Fairing will be taken out for the day. So here are the details

 

Location of meeting: King Albert Park Mac. [entrance of drive thru.]

Date: 13 Dec [sat]

Time: 8.30am [Pls be on time. Move off at 8.50am SHARP. Late comers to figure out ur own way there.]

Destination: Zed's garage.

Remarks: Do remember to bring yr own tools and secure them properly.

 

Pls add in your name for those who wanna follow me to zed's place.

 

1. Cpt.ZR / 91558592

2.

[Cpt.ZR]

oie! stop coming to eat and make MY canteeen crowded until i got no place to sit!

 

go back to your school!

 

 

nvr liao what. i not eating at Gul street 3 everyday. wanna join me?

[ethanleeqh]

Combination Unit, Front.

33110-KPP-931

Price: $58 before government profit. In stocks.

 

Best answer. 10/10 marks.

[collectees]

nvr liao what. i not eating at Gul street 3 everyday. wanna join me?

 

now never doesn't mean last time don't have!

[d0n]

Encan only, does not include header. $30 deposit to be collected. I will only be organising this MO once since i won't be buying a new exhaust for the next few years.

 

 

guys

pls do some visual checks on yr end-can screws securing it to the header. mine are so rusted that they got stucked. as such, no way to remove the end-can frm the header unless u do some welding to screws etc.

 

will be wasteful if u realised yr end-can screws are stuck after buying a new end-can!

[limbat]

Thanks Don, i will check mine in the morning.............

[collectees]

guys

pls do some visual checks on yr end-can screws securing it to the header. mine are so rusted that they got stucked. as such, no way to remove the end-can frm the header unless u do some welding to screws etc.

 

will be wasteful if u realised yr end-can screws are stuck after buying a new end-can!

 

Thanks Don, i will check mine in the morning.............

 

wehy... haven't even get end can then pour cold water liao.

 

i got handheld electric powered disk saw. the screw don't want to come out then we SAW the head off!

[Cpt.ZR]

Rendezvous Point Gate closed.

 

 

so tmr I will head down to Zed's place directly.

[d0n]

wehy... haven't even get end can then pour cold water liao.

 

i got handheld electric powered disk saw. the screw don't want to come out then we SAW the head off!

 

woah...

that's hardcore siah...

Saw 6 the movie featuring Zed!!

[limbat]

wehy... haven't even get end can then pour cold water liao.

i got handheld electric powered disk saw. the screw don't want to come out then we SAW the head off!

 

MASTER DIYer

 

 

 

woah...

that's hardcore siah...

Saw 6 the movie featuring Zed!!

 

Scary right ??

[kumudug]

guys

pls do some visual checks on yr end-can screws securing it to the header. mine are so rusted that they got stucked. as such, no way to remove the end-can frm the header unless u do some welding to screws etc.

 

will be wasteful if u realised yr end-can screws are stuck after buying a new end-can!

 

Thanks for the heads up. My bike is only 1 year old and the end can scrues were pretty hard to remove. I checked the scrues and they have rusted from the inside. Probably cause the high heat. I applied some greese to the threads

[collectees]

MO for CBR150 exhaust endcan. Started 11/12/08, ends 28/12/08, collection 28/01/09.

 

Part number 18310-KPP-910 for older bike without key-shutter. Price $58 including government profit.

1) Shaun the 'whitefang'

2) ZR the 'cpt'

3) Derrick the 'thisisme'

4) Norisha the 'Norisha'

 

Part number 18310-KPP-930 for newer bike with key-shutter. Price $64 including government profit.

1) Zed

2) Richard the 'limbat'

 

Encan only, does not include header. $30 deposit to be collected. I will only be organising this MO once since i won't be buying a new exhaust for the next few years.

[limbat]

Zed, do check if the Endcan will come with the screws to install since most of us will have worn out screws.

[collectees]

Zed, do check if the Endcan will come with the screws to install since most of us will have worn out screws.

 

they will not. but i've alread know to go to Kelantan lance screw shop to buy these standard screws.

 

in stainless steel.

[Kenneth.C]

Hello ZED!

 

Thanks once again for providing the space for the DIY session. I think I would love to conduct more of such activities in future. lol

 

just 5 bikes in that space... already so crammed... wonder what if our whole gang gathers one day. Nvm. up next JB. will organise once i am more financially free.

 

regarding the voltmeter... i'll drop by some day to get it installed and pass u the dollars for it.... and get my tool box from u too. spankew for keeping it for me...

[collectees]

Hello ZED!

 

Thanks once again for providing the space for the DIY session. I think I would love to conduct more of such activities in future. lol

 

just 5 bikes in that space... already so crammed... wonder what if our whole gang gathers one day. Nvm. up next JB. will organise once i am more financially free.

 

regarding the voltmeter... i'll drop by some day to get it installed and pass u the dollars for it.... and get my tool box from u too. spankew for keeping it for me...

 

glad to be of service!

[Cpt.ZR]

:thumb:

Hello ZED!

 

Thanks once again for providing the space for the DIY session. I think I would love to conduct more of such activities in future. lol

 

just 5 bikes in that space... already so crammed... wonder what if our whole gang gathers one day. Nvm. up next JB. will organise once i am more financially free.

 

QUOTE]

 

yes yes, I coujld'nt agree agree more with you. haha thanks Zeddo for the space and the time for helping us out.

 

Lets organise a small outing to JB!! woohooo derrick bring us there lei!

 

they will not. but i've alread know to go to Kelantan lance screw shop to buy these standard screws.

 

in stainless steel.

 

 

hey which shop in particular you go to? DO they have like the tensioner the VERY tight that screw? bring us there too the next time!

[Fire Rider]

Hello ZED!

 

Thanks once again for providing the space for the DIY session. I think I would love to conduct more of such activities in future. lol

 

just 5 bikes in that space... already so crammed... wonder what if our whole gang gathers one day. Nvm. up next JB. will organise once i am more financially free.

 

regarding the voltmeter... i'll drop by some day to get it installed and pass u the dollars for it.... and get my tool box from u too. spankew for keeping it for me...

 

Yea, Zed and all the guys whom were there. I learned alot about my new and shop smelling bike:cheeky:

 

As for the volt meter, anytime around this week is possible. Kenneth, when are you free? we go and fix it together.

[Kenneth.C]

Yea, Zed and all the guys whom were there. I learned alot about my new and shop smelling bike:cheeky:

 

As for the volt meter, anytime around this week is possible. Kenneth, when are you free? we go and fix it together.

 

any day is fine for me... i live 10 minutes from Zed. 5 minutes if i send my gf home first

 

i think it will be more inconvenient for u... so whenever you're free... u got my number... just call/sms.

[Kenneth.C]

hey which shop in particular you go to? DO they have like the tensioner the VERY tight that screw? bring us there too the next time!

 

there's a shop behind ah boy. just ride around . that area isnt very big... u will see this shop that has 2 wooden counters.

 

[Kenneth.C]

glad to be of service!

 

I figured that if i did all the DIY stuffs at shop... i'll be chopped at least $70 if not more. I told XY this... about how much i saved... and the next thing i knew... lunch was on me

 

but it was a lunch well spent!

 

anyways... the white bulbs look normal during the day. but at night they look so lovely.........

[Fire Rider]

any day is fine for me... i live 10 minutes from Zed. 5 minutes if i send my gf home first

 

i think it will be more inconvenient for u... so whenever you're free... u got my number... just call/sms.

 

Yea will do. well, how abt sat morning again? same time at around 9am?

[Kenneth.C]

Yea will do. well, how abt sat morning again? same time at around 9am?

 

this sat ah?? alamak... might not be able to... if sunday (21st dec) morning then maybe possible. weekdays night convenient?