Home of CBR600

[mimi_dirtbikefreko]

2003-2006 Hrc radiator for sale

please see this thread.

 

http://www.singaporebikes.com/forums/showthread.php?p=6510042#post6510042

[Prankster]

price is good but the spec are really base, that wat i hear from my ducati fren too. 1st too bad for me that i dont have any $$$ to spend, still on huge loan on current bike. 2nd i am not tall enough to ride on this bike and i have the thought of change to tourer if i am planning to sell my bike.

 

Nowaday the brembo are not really 100% from italy already. Recently i just realise that regina also selling brembo RCS and quite cheap as compare to last time. Some shop also selling about abt 500 for the RCS set with installation.

 

Hmmm....

 

Wat does the RCS set contain? The master brake pump + lever?

I tot the usual price is about 500-600??

 

Just wanna ask too, how much for brembo calipers + brembo brake disc per set? Our bike would need 3sets, front 2sets, back 1set. But how much does per set cost?

 

Just wanna noe though....

[Sn0w_MaN]

RCS set contain The master brake pump + lever?

normal price is 550-600 onward

 

last ask without installation is 420 from regina, from some other bike shop is abt 500-550

[Prankster]

:)Thx for the info...

[rul]

damn i miss my cbr....

 

had to sell it to make way for another honda...... honda fit

 

aaaarrrrrrggggghhhhh i want my cbr back!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

 

 

 

 

anyways, ride safely boys and girls.... been shitty weather lately

[Xr_nathan]

Hmmm....

 

Wat does the RCS set contain? The master brake pump + lever?

I tot the usual price is about 500-600??

 

Just wanna ask too, how much for brembo calipers + brembo brake disc per set? Our bike would need 3sets, front 2sets, back 1set. But how much does per set cost?

 

Just wanna noe though....

 

ahh.. the front set easily cost 2k plus liao the rear also 2k liao. y rear so expensive? cos there's no direct fit on caliper to our bike. if CBR1k den there is. for 600 u need to customised the caliper bracket. CNC machine that's y it cost more for a 2-pot caliper. how i know? i've got the front sets on but not the rear. cos we seldom use the rear brake be it on road/track. it's not worth it unless u just want all the good stuffs for yr bike n if u got a deep pocket.. hehe

[Prankster]

Okie.... Just asking though.... Curious bout the prices...

 

Most pron i'll oni get the RCS master brake pump and lever... Thats all....

 

But that hafta wait... Coz my pocket so deep until got hole....

[Ryozok]

i might wan to sell my brembo 19*20flip lever but not RCS anyone want it =D

[cbr 600 rr abs guy]

hiee guy i just bought a cbr 600 rr abs 2 mths back and i intend to install an arrow exhaust either full system or slip on so guy who own a cbr 600 rr and install a arrow pipe pls advise me if can pls let me have some pics of ur bike thks cheers:cheeky:

[Sn0w_MaN]

if u have the $$$$ go for full system with a pc3/5

if u r on budget then get a slip on... arrow or leo vin is fine...

prefer arrow...

 

 

hiee guy i just bought a cbr 600 rr abs 2 mths back and i intend to install an arrow exhaust either full system or slip on so guy who own a cbr 600 rr and install a arrow pipe pls advise me if can pls let me have some pics of ur bike thks cheers:cheeky:

[Sn0w_MaN]

u got my special price for rcs 19 on sat... i think is the cheapest... i cant believe it.. well if u keen we can go do it together... erm.. not so soon ah.. cause abit broke leh.. i just spend 700plus on that fxxking sat.. and 7hrs of waiting... i almost gone crazy...

 

next things to change for the next 6mth- batt, spocket, chain, rcs 19, maybe leo vin slip on (cheap leh)

 

 

Okie.... Just asking though.... Curious bout the prices...

 

Most pron i'll oni get the RCS master brake pump and lever... Thats all....

 

But that hafta wait... Coz my pocket so deep until got hole....

[Prankster]

u got my special price for rcs 19 on sat... i think is the cheapest... i cant believe it.. well if u keen we can go do it together... erm.. not so soon ah.. cause abit broke leh.. i just spend 700plus on that fxxking sat.. and 7hrs of waiting... i almost gone crazy...

 

next things to change for the next 6mth- batt, spocket, chain, rcs 19, maybe leo vin slip on (cheap leh)

 

No lah, RCS19 gotta wait a bit longer for myself.... Told u i aiming for some other stuffs on Sat already...

 

Btw, y u spend so much on Sat? Wat u change sia? Brake hose and brake pads cost so much meh? Or issit plus all the servicing as well? But nid until 700 meh?

 

EO + Filter = 115

Plugs = 100

Brake hose = 150

Brake pads 140

Air filter service = 10

Coolant flush = 50

 

Some more what u spend?? kaoz.... 700 plus... scary leh...

 

N y u wanna change sprockets and chain? OEM sprockets and chain last me until now leh... 42000km already... Still going strong leh... Batt dying meh? Use until die than change lah...

[Prankster]

Btw, if u scared of made in china brembo from our local stores....

 

U may wanna spend a bit more, get from ebay, than bring to our local stores for installation... At least, u not so worried about the "made in china"....

 

I think its a better idea coz after all, our life depends on the brake as well mah... Mite as well spend a little more.... Unless u can get 2nd hand from bikeshop or pple selling RCS19.... Which i dun think its easy to find...

[Sn0w_MaN]

i spend as per below that why is killing me......

 

Full service = $70

Plugs = 72

Brake hose done long ago

Brake pads 120

Air filter service = BMC - 145

Coolant = $20

M3 tires = $370

[Sn0w_MaN]

unless u bring in direct from brembo if not any other ebayer or website might be made in china too... well my mach show me 1 make in china and the orginal and if u look in detail really got different.... hashaha....

 

well i trust my mach la.. and so far the price is ok.. but still wanna to wait for awhile... getting use of my current stated now...

 

 

Btw, if u scared of made in china brembo from our local stores....

 

U may wanna spend a bit more, get from ebay, than bring to our local stores for installation... At least, u not so worried about the "made in china"....

 

I think its a better idea coz after all, our life depends on the brake as well mah... Mite as well spend a little more.... Unless u can get 2nd hand from bikeshop or pple selling RCS19.... Which i dun think its easy to find...

[Prankster]

i spend as per below that why is killing me......

 

Full service = $70

Plugs = 72

Brake hose done long ago

Brake pads 120

Air filter service = BMC - 145

Coolant = $20

M3 tires = $370

 

Wah, simi coolant u use? So cheap? Y full service they aso charge labour?? Usually like that spend ah, no nid charge labour loh... Or maybe $50... N y ur BMC servicing so much??? U mean u change to BMC air filter issit? N plus tyres mah, no wonder so ex... Muahahaha...

 

unless u bring in direct from brembo if not any other ebayer or website might be made in china too... well my mach show me 1 make in china and the orginal and if u look in detail really got different.... hashaha....

 

well i trust my mach la.. and so far the price is ok.. but still wanna to wait for awhile... getting use of my current stated now...

 

Hmmm... Well, if u trust ur mech, and with such price offered by ur bikeshop, than i would consider doing it at ur bikeshop together wif u as well...

 

Let me noe roughly when u gonna do, let me prepare the dough....

[Sn0w_MaN]

using maxima coolant, full service define as incl EO and etc.. $70 ok la... dun think got labour fee.... i change from stock to BMC filter la...

 

i might be changing my pump is either 3mth from now or latest yr end if got $$$$

[Prankster]

Nabei......

 

Ur full service consist of EO and oil filter so cheap??

 

My EO plus oil filter already cost me around 120.... Kaoz...

 

Y nv try water wetter??? I tot u will try and i wanna noe the difference from u.... Muahahaha...

 

Hmmm.... Yr end ah? Abit siong for me leh... Can after CNY anot??

[Sn0w_MaN]

hahahaha.... this is secret, i call this buddy rate... so best for me.. that why i always go back there... bad thing is it take up too much of my time. Is either u dump ur bike there early in the morning when they open and collect in the evening or come back tml.

 

Next time come over to my mach and service lor can save some $$$$ hahaha...

well want to do it at CNY ah.. abit siong for me also leh.. 1st 1/2 of the brand new yr is for me to save $$$ for my insurance in June

 

is is either i do it before yr end or 2nd 1/2 of the brand new yr...

well not in the hurry la.. miss it liao than dont change lor..

[Prankster]

Hahahahaa... U mind pm me tell me where ur bikeshop or who is ur trusted mech?

 

Really is good rate loh... But i using motul 300v leh... They got such good rate for the EO i using mah??

 

Well, nvm, as long as u wanna change the master brake pump, u let me noe... see if i got cash on hand or not loh.... such good rates cannot be missed leh.... actually i was hopin for a 2nd hand 1.... can save more money...

[Sn0w_MaN]

pm u liao.. go check and keep me update again

[peterjb]

yo guys, anyone interested in national day ride to kl? will be joining kl cbr friends for some ride.

[Prankster]

SnowMan...

 

Check tis out!!!!!!!!!!!!!!!!!!!!!!

 

http://www.motoworld.com.sg/news.php?nid=64

[Sn0w_MaN]

prankster... our goal is getting near and near...

time to list time wat is ur mod liao... so keen to know wat u have pimp...

[Prankster]

Hahahaha.... Will tell/show u when i meet up wif u lah....

 

Or maybe during outing....

 

Quick quick organise 1.... After the world cup, b4 hungry ghost festival...

 

I nv pimp much aso... Still got lots to pimp.... But no money!!!