[Group] Honda CBF150 （战鹰/FightHawk)

[HondaLoyal]

bro pikapika,

 

so wad add-ons have u install on ur bike?

[wertdeviruz]

bro pikapika,

 

so wad add-ons have u install on ur bike?

 

nothing much fer me.....juz police Strob lights.....Volt Meter......Hazard Lights and 3 tonner airHorn....LOL!!!

[pikapika]

bro pikapika,

 

so wad add-ons have u install on ur bike?

 

things changed from stock.

tyres (bridgestone)

throttle grip (bmw)

mirrors (carbon fibre colour - oval shaped)

brake line (hel)

license plate screws (change to those colored alum ones cos original ones rusty)

 

installed rev tec.

[HondaLoyal]

things changed from stock.

tyres (bridgestone)

throttle grip (bmw)

mirrors (carbon fibre colour - oval shaped)

brake line (hel)

license plate screws (change to those colored alum ones cos original ones rusty)

 

installed rev tec.

 

hi bro...

 

juz wandering, after installing revtec, what is the diff u encouter...

is their any diff in fuel consumption, power when riding wif pilllion, light brightness etc...

why u use revtec and not power abuser?

[wertdeviruz]

REV-TEC....not bad

[pikapika]

hi bro...

 

juz wandering, after installing revtec, what is the diff u encouter...

is their any diff in fuel consumption, power when riding wif pilllion, light brightness etc...

why u use revtec and not power abuser?

 

i dont know about wat is power abuser.

after install revtec, bike smoother, power wise not much diff. light brightness also no diff. fuel comsumption remains unchanged, it depends on how u ride your bike. i think rec tec protects battery.

[merboy]

latest fc 45km+++/ltr... wif revtec install also. smoothness is a guarantee for our bikes. tis sat going B.S to check my front brakes. any lobangs for a cheap complete sets of front and back sprockets plus o-ring chain. thanks.

[pikapika]

latest fc 45km+++/ltr... wif revtec install also. smoothness is a guarantee for our bikes. tis sat going B.S to check my front brakes. any lobangs for a cheap complete sets of front and back sprockets plus o-ring chain. thanks.

 

wat is sprockets? and o-ring chain

[Biposto]

REV-TEC....not bad

 

Hi, like to kow where did you install the Rev tec, like to try too.

[pikapika]

Hi, like to kow where did you install the Rev tec, like to try too.

 

check the mass order thread in this forum, cal the guy and arrange for installation, 10min job

[wertdeviruz]

check the mass order thread in this forum, cal the guy and arrange for installation, 10min job

 

let us know where lah bro....heheheh....u can show us the place bah...

[RevTec]

Hi, like to kow where did you install the Rev tec, like to try too.

 

let us know where lah bro....heheheh....u can show us the place bah...

 

Thanks bro for your interest

PM sent.

 

Feel free to contact me directly at 91735981 for the installation

 

RevTec

[pikapika]

let us know where lah bro....heheheh....u can show us the place bah...

 

last time i install at bukit panjiang there. cos was visiting my fren there and arrange for the guy to meet me there to install. i think the place to install can arrange one, pls sms the guy. revtec till now i use not bad, engine feels smoother and at high speed also feels the same.

[merboy]

revtec power... i've been using it since may... and thru our melaca trip. can say that the torque (pick up) is great but top speed still the same. maybe bought too much goodies on the way back... hahaha...

[merboy]

wat is sprockets? and o-ring chain

o-ring chain is that the chain have o-rings all around the chain. said to be quieter and lesser vibrations. sprockets are the 'teeth' that is 'turning' together your chain. read your owners manual...

[merboy]

hi,

 

this morning, i went in for a complaint of front brake lever malfunction.

 

the service advisor recommended to clean and sand the brake pads with bleeding

of the brake system.

 

to my agreement, the brake lever feel is more progressive but the braking power

is minimum. first i thought there might be some 'residue' of brake fluid on my

pads and rotor. after traveling from Boon Siew to Ubi Ave 3 and back to

woodlands, i tried to 'dry' the rotor off the 'residue' by constantly applying

the front brakes but to no avail.

 

when i had parked my bike, i turn the front wheel on main stand and there's is a

screeching noise coming from the pads and rotor, and the touch of my rotor is

HOT! which means that i had to double or triple my brake lever to attain the

same braking force. there is uneven wear and scoring marks on the rotor from my

visual inspection.

 

i would like to come on monday 1815hrs, from Jurong, to let you rectify my

SAFETY issues.

 

regards,

Song Qingyong

FBC294D

 

 

 

 

gone to B.S, problem still persist. nearly accident today. cant brake in time, so i sent them my complain letter via email... will update regarding our front brake system.

[pikapika]

wah. seems serious. most of the time i use my rear brake more. but then i change the front brake line to the hel one and its slighty more responsive after installation. brake pad and rotor never changed, only the brake line. the hel one is supposed to be stainless steel and should before better.

good luck merboy and ride safe.

 

 

hi,

 

this morning, i went in for a complaint of front brake lever malfunction.

 

the service advisor recommended to clean and sand the brake pads with bleeding

of the brake system.

 

to my agreement, the brake lever feel is more progressive but the braking power

is minimum. first i thought there might be some 'residue' of brake fluid on my

pads and rotor. after traveling from Boon Siew to Ubi Ave 3 and back to

woodlands, i tried to 'dry' the rotor off the 'residue' by constantly applying

the front brakes but to no avail.

 

when i had parked my bike, i turn the front wheel on main stand and there's is a

screeching noise coming from the pads and rotor, and the touch of my rotor is

HOT! which means that i had to double or triple my brake lever to attain the

same braking force. there is uneven wear and scoring marks on the rotor from my

visual inspection.

 

i would like to come on monday 1815hrs, from Jurong, to let you rectify my

SAFETY issues.

 

regards,

Song Qingyong

FBC294D

 

 

 

 

gone to B.S, problem still persist. nearly accident today. cant brake in time, so i sent them my complain letter via email... will update regarding our front brake system.

[pikapika]

hmm. got it. ours is using 0-rings chain? i i find the stock chain works well enough for our bike, i spray the penray chain lube every 1k and it works wonders. keke cheap and gd chain lube

 

o-ring chain is that the chain have o-rings all around the chain. said to be quieter and lesser vibrations. sprockets are the 'teeth' that is 'turning' together your chain. read your owners manual...

[pikapika]

anyone want to rewrap their seat cover? thought of doing the honda 2 tone design, last time i ask the price is about 40.

[wertdeviruz]

anyone want to rewrap their seat cover? thought of doing the honda 2 tone design, last time i ask the price is about 40.

 

 

pika....if do the seat wrap 2 tone.....do 2 cover got any cheaper price or not?...hehehe....anyone else interested?...hehehe...

[wertdeviruz]

wah. seems serious. most of the time i use my rear brake more. but then i change the front brake line to the hel one and its slighty more responsive after installation. brake pad and rotor never changed, only the brake line. the hel one is supposed to be stainless steel and should before better.

good luck merboy and ride safe.

 

 

hmmm........dats quite bad........id SUE them if anything happen bro...CHOY!!!......anyway....i wana know the results too.....do update!

[pikapika]

pika....if do the seat wrap 2 tone.....do 2 cover got any cheaper price or not?...hehehe....anyone else interested?...hehehe...

 

i dont know also leh.. i dont know the shop boss also, that time i jusT ask for fun one. u interested? that time i ask at a shop at bendemeer there

[Biposto]

last time i install at bukit panjiang there. cos was visiting my fren there and arrange for the guy to meet me there to install. i think the place to install can arrange one, pls sms the guy. revtec till now i use not bad, engine feels smoother and at high speed also feels the same.

 

Hi man,

 

thks for the tip. called the guy weiqiang and installed mine on Saturday. My comments so far is like yours. Bike is slightly smoother, no other visible or "feelable" differences do far. Maybe at a while. Anyway, Wei Qiang (Revtec guy) is a very friendly dude.Don't like the position of the REVtec though, it seems to be too close to the aire intake for the airfilter. Feel that there might be some restriction to the airflow. Also , that blinking light on the unit is "ON" all the way. Not sure if parked for 2 days, later battery got no power to start.

[HondaLoyal]

hi bros,

 

Anyone has change air filter, front brake pad and rear brake shoe before?

Can quote me the price for the above 3 items.

Thank you in advance.

[merboy]

hi bros,

 

Anyone has change air filter, front brake pad and rear brake shoe before?

Can quote me the price for the above 3 items.

Thank you in advance.

hi bros, i've enquire abt our air filter to K&N. their reply was that they have not make our filters. so sad. will be going to boonsiew tml noon to rectify my brake problem.