[Group] SBF WaveRider

[heartcore]

Help me!

I need some feedback from you guys

My wave R had some problems

Everytime I start my bike, it died. So, I let my bike warm up for 10 mins before going to school. When I reach my school traffic light junction, it died. Yes, I had increase my timing and it seems ok. But after a while, the timing decreases back to before.. I asked the shop and they say it's my timing chain.

 

And another problem is, my bike make alot of noise. The noise is not very smooth even at stationary. The shop says it's my auto bearing. All of those cost a few hundreds.

 

Any feedback??

 

PS: Shop is Global Motorsport @ Autobay, kaki bukit

[MUSHA]

Help me!

I need some feedback from you guys

My wave R had some problems

Everytime I start my bike, it died. So, I let my bike warm up for 10 mins before going to school. When I reach my school traffic light junction, it died. Yes, I had increase my timing and it seems ok. But after a while, the timing decreases back to before.. I asked the shop and they say it's my timing chain.

 

And another problem is, my bike make alot of noise. The noise is not very smooth even at stationary. The shop says it's my auto bearing. All of those cost a few hundreds.

 

Any feedback??

 

PS: Shop is Global Motorsport @ Autobay, kaki bukit

 

Sounds like my Wave when the iridium plug's gap has widened.

 

Btw, timing chain can last a long long time but it is also mileage dependant lah~

 

[katdawg]

which tyres cost 55 a pair? my mech was telling me about(on the phone) it but couldnt tell me what brand

[Blahhh]

onli noe dunlop tt900 and irc gold is $55 a piece, iirc. $55 a pair, dunno leh..

Edited May 27, 2010 by Blahhh

[osimese]

unique motor got this yoshi racing tire for wave $25/pair promotion. any feedback on this brand?

[Blahhh]

I noticed that sometimes it is difficult to engage neutral gear while stationery. Got to accelerate abit and while moving go to N. Does this mean my clutch plates are gone? Wah liao, I changed them during april only eh!!

[squarebox]

I noticed that sometimes it is difficult to engage neutral gear while stationery. Got to accelerate abit and while moving go to N. Does this mean my clutch plates are gone? Wah liao, I changed them during april only eh!!

 

I thinks it's normal. mine occur at 2-3.

At traffic light down from 3 to 2, no light for all gears. throttle abit gear 2 engage, then continue to 1.

[MUSHA]

which tyres cost 55 a pair? my mech was telling me about(on the phone) it but couldnt tell me what brand

 

I only know my mech sells YOSHI tyres for $65 a pair.

[MUSHA]

unique motor got this yoshi racing tire for wave $25/pair promotion. any feedback on this brand?

 

YOSHI tyres for $25 A PAIR????!!! U got to be kidding me!

[MUSHA]

I thinks it's normal. mine occur at 2-3.

At traffic light down from 3 to 2, no light for all gears. throttle abit gear 2 engage, then continue to 1.

 

Ya, mine oso sometimes will stuck stuck.

[MUSHA]

unique motor got this yoshi racing tire for wave $25/pair promotion. any feedback on this brand?

 

Saw their thread liao lah~

 

It's $25 per tyre.

 

Good things, not cheap. Cheap things, not good.

[Blahhh]

Talking about tyres, just now my rear tyre burst because a nail got lodged in. It happened at 70-80km/h and I was basically sliding left and right for at least 40m + before I managed to completely stop. I was slowly controlling the front making sure its straight and making minor adjusting to counter the fishtail if not buang already. Lucky sia.

 

It was so bad when I inspected the rear, it was soft enough to exposed the rim =.=

 

Pushed the bike like an idiot to a workshop, tot its just a $6 paste job, skali mech told me tyre cannot use already coz too damaged. Forked out $55 to change tyre, haaaaizzz. but ok lah, lose $55 nvm, dun lose life liao..

[MUSHA]

Talking about tyres, just now my rear tyre burst because a nail got lodged in. It happened at 70-80km/h and I was basically sliding left and right for at least 40m + before I managed to completely stop. I was slowly controlling the front making sure its straight and making minor adjusting to counter the fishtail if not buang already. Lucky sia.

 

It was so bad when I inspected the rear, it was soft enough to exposed the rim =.=

 

Pushed the bike like an idiot to a workshop, tot its just a $6 paste job, skali mech told me tyre cannot use already coz too damaged. Forked out $55 to change tyre, haaaaizzz. but ok lah, lose $55 nvm, dun lose life liao..

 

U r on spokey rims?

[katdawg]

end up the "$55/pair" tyres my mech was talking about was yoshi. but idk i heard wrongly on the phone or what, now he tell me 1 is $45. asked another mech and he said yoshi not good. gonna change rear to battlax tomorrow. more ex but feels safer, psychological. haha

[guwakzai]

You must treat the gear pedal as a normal hand clutch lever.. meaning when u drop gear, you slowly ease out. Gear 1 and 2 strongest engine brake, so it helps to only drop to those gear at very low speed. Or u can juz stop at gear4 and then take ur time dropping back to 1.

 

Don't worry lah, give you 2-3 days riding on this bike, you will get used to it...

 

rotary gear we have, we can drop from gear4 to neutral in 1 kick.

[MUSHA]

end up the "$55/pair" tyres my mech was talking about was yoshi. but idk i heard wrongly on the phone or what, now he tell me 1 is $45. asked another mech and he said yoshi not good. gonna change rear to battlax tomorrow. more ex but feels safer, psychological. haha

 

One for $45 for yoshi tyre is too ex liao lah, who will buy sia?

[Sorrie4u]

hello i just trade in my aprilia rs125 for a wave S!!! just for fun haha... i wanna pimp up the ride... its almost stock wave S now... anyone can be kind enough to give me a list of items i can easily get/change for a wave S?

 

and the price pls! thanks!

 

some things i wanna change for sure... rims and tyres and headlights

[squarebox]

hello i just trade in my aprilia rs125 for a wave S!!! just for fun haha... i wanna pimp up the ride... its almost stock wave S now... anyone can be kind enough to give me a list of items i can easily get/change for a wave S?

 

and the price pls! thanks!

 

some things i wanna change for sure... rims and tyres and headlights

 

Rims

Tires

Big brake disc

Master pump

side mirror

yss suspension

LEO VINCE EXHAUST!!!

[katdawg]

hey what pressure do you guys pump for battlax 80/90? my mech told me 290

[Sorrie4u]

yoyo... thanks for the replies... where to get these upgrades? esp for rims,side mirrors and suspension? price?

 

and about the rear brake for the wave S... can it be converted to disc brake? how much roughly?

 

and why need to change the master pump ah?

[MUSHA]

hey what pressure do you guys pump for battlax 80/90? my mech told me 290

 

290 sounds like very very high to me.

[MUSHA]

Rims

Tires

Big brake disc

Master pump

side mirror

yss suspension

LEO VINCE EXHAUST!!!

 

Wooooooooo~ some big words there...

[squarebox]

Wooooooooo~ some big words there...

 

Epic Size for Epic things... lol...

 

290 is too high.

I pump 225 front and 250 back

the sticker on my chain guard says so. I just follow.

 

Anyone face cracks on battlax?

My rear battlax have lots of stress crack inside the threads, crack can also be seen where the tire meets the rim, a few obivous crack on parts which meet the road.

Tires are 8months old (12000 km)

 

Front tire is filled with many holes(no punture) caused by stones/rocks and hard braking.

Edited June 1, 2010 by squarebox

[MUSHA]

Epic Size for Epic things... lol...

 

290 is too high.

I pump 225 front and 250 back

the sticker on my chain guard says so. I just follow.

 

Anyone face cracks on battlax?

My rear battlax have lots of stress crack inside the threads, crack can also be seen where the tire meets the rim, a few obivous crack on parts which meet the road.

Tires are 8months old (12000 km)

 

Front tire is filled with many holes(no punture) caused by stones/rocks and hard braking.

 

Now, that sounds right for tyre pressure. I follow the pressure on the chain guard.

 

What is the production date on the tyres? Front BT39s are usually like that because they are made up of softer compound.

 

[squarebox]

Now, that sounds right for tyre pressure. I follow the pressure on the chain guard.

 

What is the production date on the tyres? Front BT39s are usually like that because they are made up of softer compound.

 

 

I too follow the chain guard pressure.

Drivers often ask me whether i'm crazy to pump so much then i point to the chain guard lol...