[Group] Singapore BAJAJ Team (SBT)

[alvinyansg]

Hw much u wana sell ur bike?

 

bro, planning to change you side boxes?

saw you asking about the givi panniers

they are not the same as what you are using now?

[Wonderless]

guys, recently my ug2 180 got like backfire noise, anyone has the same experiences?

[mjbs64]

guys, recently my ug2 180 got like backfire noise, anyone has the same experiences?

 

Mine at times have if my AFR is too lean ...

 

Free flow pipe is one of the common things for backfire if AFR is too lean.

 

Did you modify your exhaust? .. means of removing the TEC chamber, whack down the db panels in the silencer pipe and also the catalytic converter?

 

If not than ....

 

Other common causes of backfires are:

 

1: Poor or unregulated engine timing is often a cause of intake backfires, but can also be responsible for exhaust backfires

2: Improper wiring in the ignition can also lead to timing issues and backfires

3: Low fuel pressure, clogged fuel filters, and weak fuel pumps could cause a severe lean air-to-fuel ratio during fuel injection

4: Missing or damaged catalytic converter can result in backfires out the tailpipe

 

Source : http://en.wikipedia.org/wiki/Back-fire

Source : http://en.wikipedia.org/wiki/Engine_timing

 

 

Another solution you can opt to try is to have a ported slide in your carburator .... this ported slide is best for those who did the 'tebuk' (whack the db panels) and removal of the catalytic converter or using illegal aftermaket pipe ... hmmmm

Edited April 3, 2011 by mjbs64

[m0bIlEnErD]

......................

Edited April 4, 2011 by m0bIlEnErD

[alvinyansg]

Mine now not givi. Anyway if the Daystar goes, I will port over all the boxes to my Phantom.

 

actually that question is for fredd

from your pic your boxes are the same as my old ones

the studd side boxes right?

cannot remove ones...

Edited April 3, 2011 by alvinyansg

[revhappy]

changed my front brake pads yesterday

not bad the sbs ones

my stock ones looks like they still have some life in them

now JB Ron97 Rm2.70

its going up up up...

 

How long(in kms) did you use your stock brake pads? I read somewhere that you can take a look at the brake pads(while they are on the bike) and make out how much of the brake pad is still left. I tried looking at my bike's but couldn't see it.

 

Wow 2.7 RM! Now Malaysians will really think whether their cars/bikes need to RON97 or not and not blindly fill RON97.

[alvinyansg]

How long(in kms) did you use your stock brake pads? I read somewhere that you can take a look at the brake pads(while they are on the bike) and make out how much of the brake pad is still left. I tried looking at my bike's but couldn't see it.

 

i have been using the stock brake pads since Day 1 when i got my bike in Jan 2009

[Wonderless]

Mine at times have if my AFR is too lean ...

 

Free flow pipe is one of the common things for backfire if AFR is too lean.

 

Did you modify your exhaust? .. means of removing the TEC chamber, whack down the db panels in the silencer pipe and also the catalytic converter?

 

If not than ....

 

Other common causes of backfires are:

 

1: Poor or unregulated engine timing is often a cause of intake backfires, but can also be responsible for exhaust backfires

2: Improper wiring in the ignition can also lead to timing issues and backfires

3: Low fuel pressure, clogged fuel filters, and weak fuel pumps could cause a severe lean air-to-fuel ratio during fuel injection

4: Missing or damaged catalytic converter can result in backfires out the tailpipe

 

Source : http://en.wikipedia.org/wiki/Back-fire

Source : http://en.wikipedia.org/wiki/Engine_timing

 

 

Another solution you can opt to try is to have a ported slide in your carburator .... this ported slide is best for those who did the 'tebuk' (whack the db panels) and removal of the catalytic converter or using illegal aftermaket pipe ... hmmmm

 

hmmm, i don think the exhaust is modified. i got the bike for about close to 2 weeks now. when i jus rode no backfire leh, recently then got backfire. like when i close throttle, den sometimes got pak pak pak sound. very very soft. but to me is still backfire ah. hahah. any side effects if i dont do anything bout it? usually it backfires when i close throttle den the rpm around 3 den will backfire. but performance wise, still not affected. i also changed engine oil last week, mutul fully sync at excel.

 

oh and btw, whats AFR?

[Wonderless]

on a side note, anyone has a spare raincoat to give me? keep getting caught up in rain but dont wish to spend $40 from helmetboys for it T_T

[alvinyansg]

on a side note, anyone has a spare raincoat to give me? keep getting caught up in rain but dont wish to spend $40 from helmetboys for it T_T

 

i think it will be good for you to invest in a set of better rain coat

if you have the cash then a lot of pulsarians here will say get RS Taichi

if not the thicker one like the OGK one sold by ah boy and helmetboys should last you quite some time

or can opt for the rain coat from JW shop

[alvinyansg]

hmmm, i don think the exhaust is modified. i got the bike for about close to 2 weeks now. when i jus rode no backfire leh, recently then got backfire. like when i close throttle, den sometimes got pak pak pak sound. very very soft. but to me is still backfire ah. hahah. any side effects if i dont do anything bout it? usually it backfires when i close throttle den the rpm around 3 den will backfire. but performance wise, still not affected. i also changed engine oil last week, mutul fully sync at excel.

 

oh and btw, whats AFR?

 

 

AFR=Air Fuel Ratio

[Wonderless]

ahhh i saw someone selling goretex one for $50 at the garage.. but i heard from another fren they can exchange it with points from their NS. so i also not sure.. anyway very exp leh, for raincoat.. but i understand the need is there. jus trying my luck here.

[alvinyansg]

ahhh i saw someone selling goretex one for $50 at the garage.. but i heard from another fren they can exchange it with points from their NS. so i also not sure.. anyway very exp leh, for raincoat.. but i understand the need is there. jus trying my luck here.

 

goretex jacket only covers your top and not your bottom

get a proper full set with the rain pants

i think a proper set of rain gear is an investment that all bikers should have

of course protection gear is also as important

[alvinyansg]

bro haktek,the hand guard you looking for can get at ah boy or can try auntie shop

[Seif]

guys, recently my ug2 180 got like backfire noise, anyone has the same experiences?

 

i think i have it too.. when I close throttle I get a soft backfiring noise.. oh well it never occurred to me as an issue! lol

[mjbs64]

Anyone interested in this .... next MO will try to get lah kekekekeke

 

Aluminium LED HandGuard .. weight around 2kg

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190084_188726217837428_100001001548907_471644_2813781_n.jpg

 

 

AXO LED HandGuard (Plastic)

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190377_189294954447221_100001001548907_475056_1355323_n.jpg

 

 

http://img196.imageshack.us/img196/5164/accerbis.jpg

 

 

http://img709.imageshack.us/img709/4307/axoled.jpg

 

 

So far Indon are using this ... .. Price around $50 or less .... shipping not included yet.

 

Cheers!

[alvinyansg]

Anyone interested in this .... next MO will try to get lah kekekekeke

 

Aluminium LED HandGuard .. weight around 2kg

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190084_188726217837428_100001001548907_471644_2813781_n.jpg

 

 

AXO LED HandGuard (Plastic)

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190377_189294954447221_100001001548907_475056_1355323_n.jpg

 

 

http://img196.imageshack.us/img196/5164/accerbis.jpg

 

 

http://img709.imageshack.us/img709/4307/axoled.jpg

 

 

So far Indon are using this ... .. Price around $50 or less .... shipping not included yet.

 

Cheers!

 

2kg?

thats pretty heavy

[mjbs64]

2kg?

thats pretty heavy

 

hahaha .. that's what they told me lol ... so when I asked them good for handle balancer .. they stated yes .... how true? .. hmm have to try lah! ... kekekekek

 

but nevertheless main objective is as the name given .. Hand Guard!!! ... hehehehehe

[alvinyansg]

hahaha .. that's what they told me lol ... so when I asked them good for handle balancer .. they stated yes .... how true? .. hmm have to try lah! ... kekekekek

 

but nevertheless main objective is as the name given .. Hand Guard!!! ... hehehehehe

 

 

the plastic one also led right?

looks nice but the Aluminium one looks even nicer

but seems a bit heavy leh

[mjbs64]

the plastic one also led right?

looks nice but the Aluminium one looks even nicer

but seems a bit heavy leh

 

yes with LED .... guess plastic more friendly in case bike drop but price slight higher than the aluminium one ... lol

 

http://www.hnsmotoparts.com/image-product/img763.jpg

[haktek]

Anyone interested in this .... next MO will try to get lah kekekekeke

 

Aluminium LED HandGuard .. weight around 2kg

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190084_188726217837428_100001001548907_471644_2813781_n.jpg

 

 

AXO LED HandGuard (Plastic)

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190377_189294954447221_100001001548907_475056_1355323_n.jpg

 

 

http://img196.imageshack.us/img196/5164/accerbis.jpg

 

 

http://img709.imageshack.us/img709/4307/axoled.jpg

 

 

So far Indon are using this ... .. Price around $50 or less .... shipping not included yet.

 

Cheers!

 

 

it keep my eyes peeled!!! but if can diy more cheap... get the plain handgard then attach led light strips....

mj if can get less then 50 i on for it! cause plain handgard is around 20...

[haktek]

i was surfing.... i saw this http://mtv.in.com/stuntmania/index.php?id=2559&showid=81

serious sia they do stunt on pulsar bikes!!!

[mjbs64]

it keep my eyes peeled!!! but if can diy more cheap... get the plain handgard then attach led light strips....

mj if can get less then 50 i on for it! cause plain handgard is around 20...

 

lol ... I checked all price around there ... $45 - $50 before shipping for this brand ...

 

btw acerbis brand price vary depends on model ... light plastic one think is cheaper than those model with metal bar attached for more stability.

Did you know that Original Acerbis Dual Rod with LED and metal bracket cost $220 at HKL? .. previously I did asked them for the price and I think Gaban also did enquire from them or Chong Aik some time ago ... sigh

[atipo]

lol ... I checked all price around there ... $45 - $50 before shipping for this brand ...

 

btw acerbis brand price vary depends on model ... light plastic one think is cheaper than those model with metal bar attached for more stability.

Did you know that Original Acerbis Dual Rod with LED and metal bracket cost $220 at HKL? .. previously I did asked them for the price and I think Gaban also did enquire from them or Chong Aik some time ago ... sigh

 

Anyone interested in this .... next MO will try to get lah kekekekeke

 

Aluminium LED HandGuard .. weight around 2kg

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190084_188726217837428_100001001548907_471644_2813781_n.jpg

 

 

AXO LED HandGuard (Plastic)

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190377_189294954447221_100001001548907_475056_1355323_n.jpg

 

 

http://img196.imageshack.us/img196/5164/accerbis.jpg

 

 

http://img709.imageshack.us/img709/4307/axoled.jpg

 

 

So far Indon are using this ... .. Price around $50 or less .... shipping not included yet.

 

Cheers!

 

On lah.... Got white kaler?

[atipo]

godd morning people..........

Edited April 3, 2011 by atipo