[Group] Singapore BAJAJ Team (SBT)

[glzco]

what i meant is even if you are taking your tp, you can still go ahead to buy the FF helmet mah

since like what was mention before the testers allow to wear FF and pass then go ahead to wear lor

 

glzco is right also about not rushing through your test route

when you are calm in going through the route you will definately be more zai in your riding

 

oh ya.. abt tt FF part right.. i tink it best to ask the driving centre themselves.. we can only speculate unless someone confirms it wif the actual testers..

 

and yea.. u can go ahead and buy ur FF first.. no harm..

[alvinyansg]

oh ya.. abt tt FF part right.. i tink it best to ask the driving centre themselves.. we can only speculate unless someone confirms it wif the actual testers..

 

and yea.. u can go ahead and buy ur FF first.. no harm..

 

 

yupz yupz

don't think the promotion will be there too long..

 

bro so late liao haven slp?

[glzco]

nope..not yet.. wad abt u.. feelin damn upset abt life nw..

[alvinyansg]

double post...

[alvinyansg]

nope..not yet.. wad abt u.. feelin damn upset abt life nw..

 

 

always look on the bright side of life...

[mjbs64]

bro.. whr u buy the posh faith handel brace? looks nice!!

 

 

@ Motoworld ...

 

http://motoworld.com.tw/detail.php?pid=924

 

Quality products made in Japan.

9 different colours available for shaft and brackets

4 different sizes in length to suit different handles length

 

Expensive though ..

 

Shaft $60

Brackets $30

Installation FOC or DIY

 

@ the website, the picture looks ugly but

when I first looks on hands .. it's nice

after installation pretty cool ..

and when riding .. wow can feel the difference ..

but hmm my mistake .. should get the red or gold brackets more striking .. hehehe lol

Edited March 27, 2010 by mjbs64

[glzco]

always look on the bright side of life...

 

yea.. doin so doin so.. ha..

 

@ Motoworld ...

 

http://motoworld.com.tw/detail.php?pid=924

 

Quality products made in Japan.

9 different colours available for shaft and brackets

4 different sizes in length to suit different handles length

 

Expensive though ..

 

Shaft $60

Brackets $30

Installation FOC or DIY

 

@ the website, the picture looks ugly but

when I first looks on hands .. it's nice

after installation pretty cool ..

and when riding .. wow can feel the difference ..

but hmm my mistake .. should get the red or gold brackets more striking .. hehehe lol

 

cool.. but $90.. we can mount stuff on the shaft also? cuz if so.. i tinkin of gettin some brackets to mount the vado cam on the shaft.. this way no nid sew on jacket or wt..:thumb: hmmm.. its serves to reduce vibration on ur handle bar? how does it work?

[Markopolo]

when ur tp marko? u learning at which sch?

 

My tp in mid may . lols BBDC de.. haha.. sianssssss dam long.. dunno why so long.. haha i juz pmed them to see if got sizes available ahah. i thought of it le.. i should go ahead and buy. den pass le sell my current one to whoever who wants

ahahaha

[Orleng]

My tp in mid may . lols BBDC de.. haha.. sianssssss dam long.. dunno why so long.. haha i juz pmed them to see if got sizes available ahah. i thought of it le.. i should go ahead and buy. den pass le sell my current one to whoever who wants

ahahaha

that's what I did too, just got the FF before i passed. once pass tp, switch to it straightaway. save the open face for further CL2/A lessons.

[Ah_Pet]

that's what I did too, just got the FF before i passed. once pass tp, switch to it straightaway. save the open face for further CL2/A lessons.

 

i also did that.. but open face for pillion.

[mjbs64]

yea.. doin so doin so.. ha..

 

 

 

cool.. but $90.. we can mount stuff on the shaft also? cuz if so.. i tinkin of gettin some brackets to mount the vado cam on the shaft.. this way no nid sew on jacket or wt..:thumb: hmmm.. its serves to reduce vibration on ur handle bar? how does it work?

 

The brace shaft act as an extra bridge to add strength on the handle plus to dampen and minimise the vibration frequency before it reaches to the end of the handles. The end weights on the handle absorbs the loose vibration frequency and try to kills it. That is why what the end weights are used for .. the bigger the weights more vibration can be absorbed.. but since all motors generates enormous vibration .. all those dampenings, stabilizers and balancers on the bike unable to stop it but managed to REDUCE ONLY. Rubber and foam are also a good material to absorb more vibrations, that's the reasons too why our handle's grips are made of rubber and foam. You can feel the dfference on the vibrations when you wear padded gloves, normal gloves and bare hands too. Hopes this clarify your doubts.

 

In archery same concepts being used to stabilise our bow and arrows.

 

What is vibration?

http://safetycenter.navy.mil/acquisition/vibration/whatisvibration.htm

 

How to control vibration?

http://stason.org/TULARC/physics/acoustics-faq/3-3-How-is-vibration-isolated-and-controlled.html

 

In archery how and why need a stabilizer rods?

http://www.win-archery.com/Stabilizer2

Edited March 28, 2010 by mjbs64

[mjbs64]

A moment to share from a friendly mechanic ... Dan's Motorcycle

 

Wheel Bearings

 

" Wheel bearings usually last quite a while, perhaps 15,000 to 30,000 miles. If you feel any play in the bearings replace them. If the wheel hub feels very hot to the touch, check to see if the brakes are dragging. If the brakes are not dragging, replace the bearings because there has been a lubrication failure. The bearings have overheated and are ruined. Likewise, if you have the axle out for some reason, like a tire change, and you notice it is discolored, as if it had been heated up with a torch, replace the bearings and the axle too. If you are going on a long trip and can't remember when you last replaced the wheel bearings, replace the bearings. If in doubt, replace the bearings. You only have two wheels. If one locks up at speed, you will be in BIG trouble!"

 

[glzco]

The brace shaft act as an extra bridge to add strength on the handle plus to dampen and minimise the vibration frequency before it reaches to the end of the handles. The end weights on the handle absorbs the loose vibration frequency and try to kills it. That is why what the end weights are used for .. the bigger the weights more vibration can be absorbed.. but since all motors generates enormous vibration .. all those dampenings, stabilizers and balancers on the bike unable to stop it but managed to REDUCE ONLY. Rubber and foam are also a good material to absorb more vibrations, that's the reasons too why our handle's grips are made of rubber and foam. You can feel the dfference on the vibrations when you wear padded gloves, normal gloves and bare hands too. Hopes this clarify your doubts.

 

In archery same concepts being used to stabilise our bow and arrows.

 

What is vibration?

http://safetycenter.navy.mil/acquisition/vibration/whatisvibration.htm

 

How to control vibration?

http://stason.org/TULARC/physics/acoustics-faq/3-3-How-is-vibration-isolated-and-controlled.html

 

In archery how and why need a stabilizer rods?

http://www.win-archery.com/Stabilizer2

 

cool.. nice link.. ha.. but this is useful i guess.. tinkin of goin to get one also.. but if i mount stuff on the shaft.. will it vibrate my gizmos to nothingsness? since it adsorbs the virbrations.. hahaha..

 

that's what I did too, just got the FF before i passed. once pass tp, switch to it straightaway. save the open face for further CL2/A lessons.

 

hahha.. i also did the same.. except tt i bought a 2nd hand FF for pillion.. the open face still lyin at hm.. gettin stinky from storage smell.. hah..

[mjbs64]

cool.. nice link.. ha.. but this is useful i guess.. tinkin of goin to get one also.. but if i mount stuff on the shaft.. will it vibrate my gizmos to nothingsness? since it adsorbs the virbrations.. hahaha..

 

.

 

lol ... it just MINIMISE the vibration, not totally kills the vibration ... it's not like you are riding Gold Wing bike .. hahahaha

 

 

hmm... here for info comparison of the price for archery stabilizers system in the link I posted ..

 

For 1 Bowset you need below items to stabilise your bow and arrow

 

Long carbon Stab rod .. ard $150

Short carbon Stabs rod .. ard $160 a pair

Extender carbon Stab .. ard $50

Carbon V Bar ... ard $80

Top Stab Rubber/Foam Damper .. ard $50

End weights Stainless steel .. $6 a piece (3-5 pcs needed)

Rubber Damper .. $15 a piece (3 needed)

 

hahah ... anyone thinking for serious archery?

Edited March 28, 2010 by mjbs64

[Orleng]

i also did that.. but open face for pillion.

 

hahha.. i also did the same.. except tt i bought a 2nd hand FF for pillion.. the open face still lyin at hm.. gettin stinky from storage smell.. hah..

 

cool. i went with the 2nd option too. pillion gets a 150bucks PSB FF. OF used only in SSDC. haha.

[Nemesis]

KOPI SESSION

Date : 28/3/10 Tonite

Venus: Blk 628 Ang Mio Kio St 61

Time : 2200Hrs.

 

ANyone Joining ?

 

1)lindavw

2)Nemesis

3)

4)

5)

6)

[mjbs64]

KOPI SESSION

Date : 28/3/10 Tonite

Venus: Blk 628 Ang Mio Kio St 61

Time : 2200Hrs.

 

ANyone Joining ?

 

1)lindavw

2)Nemesis

3)

4)

5)

6)

 

if can do my lights and volt meter, i take into serious consideration ....how ok? hehehhe

Edited March 28, 2010 by mjbs64

[Markopolo]

Hello anybody recently bought a 200 and pay by installments? haha and wondering if insurance include hor is together pay as installment one right?

[SC Gaban]

A moment to share from a friendly mechanic ... Dan's Motorcycle

 

Wheel Bearings

 

" Wheel bearings usually last quite a while, perhaps 15,000 to 30,000 miles. If you feel any play in the bearings replace them. If the wheel hub feels very hot to the touch, check to see if the brakes are dragging. If the brakes are not dragging, replace the bearings because there has been a lubrication failure. The bearings have overheated and are ruined. Likewise, if you have the axle out for some reason, like a tire change, and you notice it is discolored, as if it had been heated up with a torch, replace the bearings and the axle too. If you are going on a long trip and can't remember when you last replaced the wheel bearings, replace the bearings. If in doubt, replace the bearings. You only have two wheels. If one locks up at speed, you will be in BIG trouble!"

 

 

wheel bearings eh? i ive been riding for quite a while n never even come across dis. time to check my wheel bearings cos dis coming friday got long trip. thanks uncle!

[mjbs64]

wheel bearings eh? i ive been riding for quite a while n never even come across dis. time to check my wheel bearings cos dis coming friday got long trip. thanks uncle!

 

 

going where this round? ... take care

 

check out this useful link no doubt it's old but pack with knowledge ..

 

http://www.dansmc.com/mc_repaircourse.htm

[mjbs64]

Hello anybody recently bought a 200 and pay by installments? haha and wondering if insurance include hor is together pay as installment one right?

 

call David at UM .. a nice chap .. he will answer all your doubts .. seriously no joke

[tyrtok]

Wahh MjBs.. the cheap ff **** i wan buy sia.. but havent pass yet.. If i get a ff **** now for my training sure like some action barbi. lols any idea whats the usual price of the helmet? And still got trade in?

 

u can buy ur ff cos u gonna use it 1 day.

i would not recommend u to wear it for ur tp or training. its like attracting unwanted action.

if u compare 10 rider with white helmet and 1 with black, u think the instructor will pay more attention to who?

u will be in a disadvantage when in tp, higher chance of failing.

[breadman]

lol who wan mod his bike till like that

http://forums.vr-zone.com/showthread.php?p=7832428#post7832428

[tyrtok]

breadman also frequent vr? whats ur nick?

[alvinyansg]

hahha.. i also did the same.. except tt i bought a 2nd hand FF for pillion.. the open face still lyin at hm.. gettin stinky from storage smell.. hah..

 

 

can switch between both the open face and ff mah

then can use both

sometimes wear ff hot mah