[CLOSED] SBF Yamaha 125Z

[rexwong79]

So!How about this friday?anyone?meet at...eh...i dunno how to be idian chief leh,say this friday at yishun dam?about 10pm?

[vyzyl]

Halo...

[Profanity]

Originally posted by vyzyl@Dec 2 2005, 02:05 AM

Halo...

125Z rider???

[rexwong79]

oh ok...those who are interested in outing.leave me your number.i contact all.2person i also will come out.

[hotdog81]

Originally posted by rexwong79@Dec 2 2005, 03:06 AM

oh ok...those who are interested in outing.leave me your number.i contact all.2person i also will come out.

hotdog81: 98481949

[hotdog81]

hi guys...recently i just bought a chamber pipe from j.b but i havent fix the pipe yet. do any of u guys know how much will it cost me if i were to change the mainjet in singapore?

[a]

Originally posted by hotdog81@Dec 11 2005, 07:09 AM

hi guys...recently i just bought a chamber pipe from j.b but i havent fix the pipe yet. do any of u guys know how much will it cost me if i were to change the mainjet in singapore?

if doing normal setting of main jet usually cost $20-30 depends on shop...

but excluding mainjet.

anybody intrested in ported block with upsize piston and bmpower chamber exhuast selling for $150 together,sure hp increase:cheeky:

[etky85]

hi guys.. i wan to buy 125z but looking for a second hand.. any bikeshop recommendation for good 125z? appreciate all ur help greatly.. thanks.. cheers..

[ahyiz]

any of u done porting for ur 125z be4??i face a problem after i port.. my spark plug very easy will spoil gt 1 time i change it 2 day after i put a new 1.. i pot at malaysia ..the speed do haf alot of difference but spark plug had alot of problem also.. any shop in sg can do a great job a 125z to recomened???thx for ur all help..

[akiko]

Hi anyone knows weather there is any suitable piston that can up the cc of 125Z? Can RXZ piston fit if i make the block bigger??? Cos RXZ is 135CC i assume that the piston is bigger than 125Z but i dunno weather can fit into it... ANY pro can help with this question? or is there any suitable piston like TZM or whatever piston that can fit in n up the CC of the bike???

 

and second question can X1 front suspention can fit into 125Z???? cos the front mud guard look nicer and more stylish.....

 

Sian gg 3years old liao my bike going for inspection soon alot things cannot pass...... if not sell away and buy X1 oso not bad.... my fuel consumtion is like crazy.... full tank 120KM

[stroker]

Originally posted by akiko@Dec 16 2005, 01:16 AM

Hi anyone knows weather there is any suitable piston that can up the cc of 125Z? Can RXZ piston fit if i make the block bigger??? Cos RXZ is 135CC i assume that the piston is bigger than 125Z but i dunno weather can fit into it... ANY pro can help with this question? or is there any suitable piston like TZM or whatever piston that can fit in n up the CC of the bike???

 

and second question can X1 front suspention can fit into 125Z???? cos the front mud guard look nicer and more stylish.....

 

Sian gg 3years old liao my bike going for inspection soon alot things cannot pass...... if not sell away and buy X1 oso not bad.... my fuel consumtion is like crazy.... full tank 120KM

Mine's full tank for 100km.

 

Thanks...

[akiko]

Haha anyway my 125Z sold liao... jus brought his younger brother X1 quite cheap not bad.

[Gresini]

Originally posted by ahyiz@Dec 13 2005, 05:26 AM

any of u done porting for ur 125z be4??i face a problem after i port.. my spark plug very easy will spoil gt 1 time i change it 2 day after i put a new 1.. i pot at malaysia ..the speed do haf alot of difference but spark plug had alot of problem also.. any shop in sg can do a great job a 125z to recomened???thx for ur all help..

Plug spoil due to too wet or insulator burned? If burned lift up yr needle by a clip or add washer to lift it up. idle screw need to readjust. Oil wet reduce yr 2t intake.

[howitsucks]

Originally posted by etky85@Dec 12 2005, 03:41 PM

hi guys.. i wan to buy 125z but looking for a second hand.. any bikeshop recommendation for good 125z? appreciate all ur help greatly.. thanks.. cheers..

Hi i have my 125z for sale if you want anyway if not i sending to shop. My bike's in stock condition and after 1.5yr of usage only my brake valve gave me prob and i changed it liao. Interested call me we can discuss. Jerry | 96814714

 

link : http://www.singaporebikes.com/forum/index....howtopic=102927

[kkz]

jb ahboy selling 125z racing footrest how much ar ? anyone know the price ?

[hotdog81]

Originally posted by kkz@Dec 26 2005, 10:51 AM

jb ahboy selling 125z racing footrest how much ar ? anyone know the price ?

that time i bought is at RM230. Brand Domino...no need to drill hole.

[killbarbie]

*MA 125Z KENA SABO!!*

WHY?!!!

altho da nick given to tis bike is 'the devil' bike, i dont think that is an excuse to justify the rider?

dont know whether i got make enemies out there...but its saaaad, real saaaad~!

 

things that i kena sabo ever since i got this bike 2yrs back:

1. someone put sand in ma engine oil compartment

2. break/steal ma side mirrors

3. force open my seat

4. force break ma gear lever

5. steal ma tyre air-caps (so cheap also want to steal)

6. poured engine oil on ma seat

7. burnt a 50cent mark on ma seat

8. everytime put parking coupon, somebody throw it away

9. cut ma spark plug cable

10. damage ma balancers

11. break ma headlite

12. break ma front signal lite

 

every time ma bike kena sabo, i throw money & repair it well.

i park first floor at MSCP at "golden lot" where everybody who walk into ma carpark can see it.

after that, sure kena again.

im so tired & dry throwing money on damages that I neva do & damages tat i dont derserve.

 

ppl always say: 'this kindda things always cannot be help one. if you want safe, put ur bike at ur house ar?'... ridiculous aint it? unless ppl kena their bike sabo, they wont know da sadness & frustration. but really.... wat else can i do?

 

i reported to the police, but wat can they do? oni help to 'look out' & they will 'try their best'.

not tat they're gonna run a fingerprint test or installed a surveillance cam.

becoz there's bigger things to worry abt...like tsunami & terrorist attacks, compared to an insignificant 125z yar?

 

i feel sorry for tat pathetik person who has no balls but instead, pick on a grl's bike.

feel so sorry he is so free all da time, like no work to do, to damage ma bike & endanger my life.

to da person who is holding tat grudge against me, ma apologies if i have unintendedly hurt you HOWEVER! i am approachable & friendly & we can talk it out yar?

 

to all da riders, please be cautious of ur bike status.

dont be complacent abt parking ur bike at the carpark.

our bikes are our form of daily commuting, our pride & joy & our life.

u wrk hard, u save hard, to perfect ur bike...yet there r some losers out there who r so jealous.

 

if you dont like others to do bad things to u, dont do it to others too.

to all bike vandals & theft, hope u feel for innocent riders like maself.

 

Thank you for ur time in reading tis.

 

(BTW im lookin for 2nd-hand 125z headlight wit signal lite covers. PM me thx!)

 

[Clement]

Originally posted by ahyiz@Dec 13 2005, 05:26 AM

any of u done porting for ur 125z be4??i face a problem after i port.. my spark plug very easy will spoil gt 1 time i change it 2 day after i put a new 1.. i pot at malaysia ..the speed do haf alot of difference but spark plug had alot of problem also.. any shop in sg can do a great job a 125z to recomened???thx for ur all help..

Hi, you might want to try out vectorone. They have a whole range of mod stages for you to choose from - 125z port mods

 

You could let James take a look at your bike, I'm sure he'll figure out what's up with it.

 

These guys are good. Porting is an delicate art and these guys are pretty good at it. Totally different power delivery from a stock Zed. Rode a new stock Zed for a few weeks before getting it done up. Stock powerband (if I can remember correctly) was somewhere around 5000 - 7000 RPM, with a very slow over-rev to 8500. My beloved Zed has a much fatter and meatier band which builds from 6000 all the way to 8500, with a brisk over-rev to 10,500 RPM. Performance can be increased even further, however my wallet would not permit those few more mods..

 

Been riding my modded Zed for 8 months now. So efficient is the engine now running that my fuel consumption is around the 22 - 24 km/L mark, similar or better than any stock Zed!

 

Love this bike compared to my previous GSX-R400. Very fun little sleeper bike.

 

Too bad I'll have to be selling it soon

[stroker]

Originally posted by killbarbie@Dec 28 2005, 10:23 AM

*MA 125Z KENA SABO!!*

WHY?!!!

altho da nick given to tis bike is 'the devil' bike, i dont think that is an excuse to justify the rider?

dont know whether i got make enemies out there...but its saaaad, real saaaad~!

 

things that i kena sabo ever since i got this bike 2yrs back:

1. someone put sand in ma engine oil compartment

2. break/steal ma side mirrors

3. force open my seat

4. force break ma gear lever

5. steal ma tyre air-caps (so cheap also want to steal)

6. poured engine oil on ma seat

7. burnt a 50cent mark on ma seat

8. everytime put parking coupon, somebody throw it away

9. cut ma spark plug cable

10. damage ma balancers

11. break ma headlite

12. break ma front signal lite

 

every time ma bike kena sabo, i throw money & repair it well.

i park first floor at MSCP at "golden lot" where everybody who walk into ma carpark can see it.

after that, sure kena again.

im so tired & dry throwing money on damages that I neva do & damages tat i dont derserve.

 

ppl always say: 'this kindda things always cannot be help one. if you want safe, put ur bike at ur house ar?'... ridiculous aint it? unless ppl kena their bike sabo, they wont know da sadness & frustration. but really.... wat else can i do?

 

i reported to the police, but wat can they do? oni help to 'look out' & they will 'try their best'.

not tat they're gonna run a fingerprint test or installed a surveillance cam.

becoz there's bigger things to worry abt...like tsunami & terrorist attacks, compared to an insignificant 125z yar?

 

i feel sorry for tat pathetik person who has no balls but instead, pick on a grl's bike.

feel so sorry he is so free all da time, like no work to do, to damage ma bike & endanger my life.

to da person who is holding tat grudge against me, ma apologies if i have unintendedly hurt you HOWEVER! i am approachable & friendly & we can talk it out yar?

 

to all da riders, please be cautious of ur bike status.

dont be complacent abt parking ur bike at the carpark.

our bikes are our form of daily commuting, our pride & joy & our life.

u wrk hard, u save hard, to perfect ur bike...yet there r some losers out there who r so jealous.

 

if you dont like others to do bad things to u, dont do it to others too.

to all bike vandals & theft, hope u feel for innocent riders like maself.

 

Thank you for ur time in reading tis.

 

(BTW im lookin for 2nd-hand 125z headlight wit signal lite covers. PM me thx!)

 

Ma condolence.... :cry: ha..

 

Chill out. Life's less serious. Hope those b@st@rds get caught... Should catch 'em red-handed and 'heh-heh-heh' him...

 

Cheers

[stroker]

Originally posted by Clement@Dec 28 2005, 01:56 PM

Hi, you might want to try out vectorone. They have a whole range of mod stages for you to choose from - 125z port mods

 

You could let James take a look at your bike, I'm sure he'll figure out what's up with it.

 

These guys are good. Porting is an delicate art and these guys are pretty good at it. Totally different power delivery from a stock Zed. Rode a new stock Zed for a few weeks before getting it done up. Stock powerband (if I can remember correctly) was somewhere around 5000 - 7000 RPM, with a very slow over-rev to 8500. My beloved Zed has a much fatter and meatier band which builds from 6000 all the way to 8500, with a brisk over-rev to 10,500 RPM. Performance can be increased even further, however my wallet would not permit those few more mods..

 

Been riding my modded Zed for 8 months now. So efficient is the engine now running that my fuel consumption is around the 22 - 24 km/L mark, similar or better than any stock Zed!

 

Love this bike compared to my previous GSX-R400. Very fun little sleeper bike.

 

Too bad I'll have to be selling it soon

Hi bro, which stage is your block being ported? K or R-1? And how much dough did you bleed out for it??

 

Thanks & Cheers!

[Clement]

Originally posted by stroker@Dec 28 2005, 08:48 PM

Hi bro, which stage is your block being ported? K or R-1? And how much dough did you bleed out for it??

 

Thanks & Cheers!

I basically got the K-1 kit, minus the v force and quarter throttle, due to financial and personal preference.

 

The prices can all be found on this page!

[stroker]

Originally posted by Clement@Dec 29 2005, 10:24 AM

I basically got the K-1 kit, minus the v force and quarter throttle, due to financial and personal preference.

 

The prices can all be found on this page!

WOW, K-1 sia.... ROCK man...

 

BTW, Wads yr plate no, cos I better slow down when I see ya on the road, wait kena blow by you and left me with a puff of smoke.... ha.

[Clement]

Originally posted by stroker@Dec 29 2005, 10:40 AM

WOW, K-1 sia.... ROCK man...

 

BTW, Wads yr plate no, cos I better slow down when I see ya on the road, wait kena blow by you and left me with a puff of smoke.... ha.

Keep a low profile bro... My Zed is for me alone to appreciate. No one else, esp the boys in white...

[Profanity]

What's the best tyre size for both front n rear. I heard that using the same profiles for front n rear is dangerous.

[HVC]

i post a few questions at bike specs & reviews and its unanswered so i guess i ask here..well..i just got my license and i wanna get a first hand 125z or 125zR ...are they still available? what plate is it? what is OTR price for first hand?...Thx a lot..appreciate if yall help me..