Repaint of the Bike

[MR BIKER]

Many shops left there like Future Scooter and Euroshine because the building going to be demolished. Is KBC still there then??

[anthonykoh]

can anyone recommend a shop which repair crack side fairing? I am riding CBR150. Thanks

[gohjlb]

can give me ah kun number? thanks ...

 

Me too. i consider for spraying job when i go for holiday .

[chinytt]

Its ok I found his address and contact already. I must say its really ulu even the streetdirectory did not show his place on the map.

 

Hi, possible to let me the address n contact of this gentleman? I'm working in Loyang and it's better choice to do repainting for my bike. Thanks n cheer!!

[camo]

Hi guys I'm thinking of spraying my cbr4 glossy black wif rims black too any shop to reccomend and those that won't take so long one?

[ahron90]

Need gurus advice.

 

I plan to respray some parts of my gilera plastic but current paintwork is glossy type, so if I spray black on top of it, will it stick or I have to sand down my current paintwork? Or got any spray can make it stick?

 

Then if let say it sticks, how do I obtain the glossy feel again? Must I spray lacquer on top of new paintwork?

 

Please help thankiew

[Sharkboy]

Need gurus advice.

 

I plan to respray some parts of my gilera plastic but current paintwork is glossy type, so if I spray black on top of it, will it stick or I have to sand down my current paintwork? Or got any spray can make it stick?

 

Then if let say it sticks, how do I obtain the glossy feel again? Must I spray lacquer on top of new paintwork?

 

Please help thankiew

 

Am not a guru, but based on experience its best to sand down the material you want to spray. Reason so, it will stick directly on the raw surface thus there will be no chipping and etc.

 

You can buy those spray cans to paint you bike parts. Buy those with glossy finish. If you want extra shiny then can overlay it with lacquer. Time interval is also crucial else it may ruin the paint. Good luck DIY-ing.

[giggs786]

Its always the best to DIY certain paintjobs..Its best to use a medium grade sandpaper and add some water to the targeted area..once done, spray it during the hot weather and within a clean environment..i highly recommend sending ur bike over to a bike shop for lacquring service for a superior finishing..shldnt cost u more den 50 bux

[ahron90]

Okay. Maybe I try sanding a small part and see how it goes. Nowadays rain and seldom shine

[mdarto]

Hi bros, any good shops to recommend? Intending to get it done at yeow motors. Any bros send their bike there got a respray before? Would like to hear all views and ratings. Thanks!

[mdarto]

Hi bros, any good shops to recommend? Intending to get it done at yeow motors. Any bros send their bike there got a respray before? Would like to hear all views and ratings. Thanks!

[mdarto]

Hi bros, any good shops to recommend? Intending to get it done at yeow motors. Any bros send their bike there got a respray before? Would like to hear all views and ratings. Thanks!

[shemish]

Guys! im looking to repray my bike

Is Replica Spray painting Still around?!

Or can any kind bro recommend me some shop that does spray painting?

Thanks!

 

Olla Everyone,

 

Spray painting need quality and will look good and long lasting.

Personal preference will be Replica spray painting at KBC (kallang).

Look for Ah Kun the owner. Nice chap and will give ideas as well.

Price varies depend on bikes model.

If you know where ah boy workshop is that's where you can find the shop along that lane.

 

Cheers Everyone!

[r1der]

Guys! im looking to repray my bike

Is Replica Spray painting Still around?!

Or can any kind bro recommend me some shop that does spray painting?

Thanks!

 

Bro, u can try paint extreme in ubi. Look for eric. I got send my bike for new paint before. I would say their workmanship n the paint material are quite good.

[shemish]

Bro, u can try paint extreme in ubi. Look for eric. I got send my bike for new paint before. I would say their workmanship n the paint material are quite good.

 

thanks bro! You know whats their rate like?? for 1 or 2 color?

[r1der]

thanks bro! You know whats their rate like?? for 1 or 2 color?

 

hmmm... u meant full paint right? if i remember correctly, single colour about sgd280, 2 colour sgd380, 3 color sgd480... something like tat.

[shemish]

hmmm... u meant full paint right? if i remember correctly, single colour about sgd280, 2 colour sgd380, 3 color sgd480... something like tat.

 

Thanks alot man!! gonna drop by and check things out!

[shemish]

Guys, thinking of spraying my bike white and red in matt, it is possible right?? Price difference is there any??

any people matt at paint extreme before can share??

[dage1314]

ong and sons at defu lane 10. heard they are the best and they are the only one who acttly bake the paintjob in cos they have a oven. but den quality comes at a price.... or u can try teo spray paint, think its cheaper....

teo spray service not good .better don't go

[jason22]

Just re-sprayed my bike with HL Cycle at Autobay @ Kaki Bukit... Must say that the workmanship is very good for the price they charge! ($280) Its the color which i was hoping for and they also sprayed my fuel-tank cover and restored it from its poor looking condition!

 

 

[SimpleRider]

Just re-sprayed my bike with HL Cycle at Autobay @ Kaki Bukit... Must say that the workmanship is very good for the price they charge! ($280) Its the color which i was hoping for and they also sprayed my fuel-tank cover and restored it from its poor looking condition!

 

 

[ATTACH=CONFIG]279163[/ATTACH]

 

Bro, you paid $280 for the fuel tank, tail, front mud guard & belly pan?

[jason22]

Bro, you paid $280 for the fuel tank, tail, front mud guard & belly pan?

 

Yup thats right!

[hederascorner]

Probably much lesser

[nick23]

any review on gold hill at ubi 3007? HL cycle no longer assist in sending items for painting.

[starlight_com]

any spray shop at north west? thanks

Edited April 9, 2014 by starlight_com