Aprilia Riders

[ArchArrow]

Oh ya. anybody knows hw much does it cost to put a arrow pipe in milo kong? eg i have the arrow and milo already i wanna go jb fix it in . any price range for doing that in jb?? and jb which shop do betteR??

[Guest koyok]

guys i need help... my rs125 duno wat happen liao le

 

i start engine can start... warm up then when engaged first gear then when rev or half clutch once mroe than 2rpm engine die off...

 

 

wat could the possibilities???

 

 

wat can i try to do before i tow it away?

 

Sounds familiar. Tuning?

[Guest BabY_LeS]

Who had an arrow to sell me?

my fren's y2k that I'm toking abt has an arrow inside the milo.. U wan it?

[Guest BabY_LeS]

guys i need help... my rs125 duno wat happen liao le

 

i start engine can start... warm up then when engaged first gear then when rev or half clutch once mroe than 2rpm engine die off...

 

 

wat could the possibilities???

 

 

wat can i try to do before i tow it away?

yeah.. very familiar and scary experience.. Happened to me be4.. For my case, It suddenly happened when i was riding.. still rem i was at the Mah Pte Ltd junction and my bike out of the blue haf that prob.. scary journey home.. Need to rev and play on the clutch a lot if not, it'll stalled.. but after I changed to 2nd gear, everything went smoothly.. At that point in time, juz pray hard that i dun needa stop.. if not will take hell long to get the bike moving....

 

ah boon just helped me tune again.. that's all.. Think it's due to the "magnet" that I installed..

[DESMOSEDICI]

keke.. his prob solved.. water went into his carb.. removed n its fine..

[eyz]

Oh ya. anybody knows hw much does it cost to put a arrow pipe in milo kong? eg i have the arrow and milo already i wanna go jb fix it in . any price range for doing that in jb?? and jb which shop do betteR??

 

ask me lah...

you can make your milo swallow the arrow pipe at Wing Yap. It's located

along Balestier Road, you gotta check out the exact address dude

altenatively, you can do it at the famous Ideal, but they'll charge you

$300+, whereas Wing Yap charges you $220+.

I dunno the price at JB, but imagine you have to carry the pipe through

the custom hehe

it'll be a funny sight

[eyz]

1) Chin Kuan (1EYZ1) Tel: 92390400 Email: [email protected]

2) Barry (Cockster4) Tel: 93878827 Email: ...

3) Cruiser (SERVOPRAX) Tel: 90296414 Email: ...

4) Nicholas (RSY2K) Tel: 93691820 Email: Protected( No spamming)

5) Charleston (ViperRS125) Tel: 93860741 Email: ???

6) Kumar (Jimmy_25) Tel: 96937264 Email: [email protected]

7) Del (Raider) Tel: 92780246

8) Ariff (whiskey7sg) Tel: 98476006

9) Aaron (AHUCHUA5582)Tel: 98518579

10) Jeremy (CPW76) Tel: 93423367

11) Nigel (LORMAIGAI) Tel: 93620583 Email: [email protected]

12) Eric (Nsr150) Tel : 91775987 Email : [email protected]

13) Stefan (stefan_king)Tel 91850776 Email: [email protected]

14) Austin (AUSTIN174) Tel: 91737738

15) Norman (PASS_MOTION) Tel: 98435077

16) John (ACEVIPER107) Tel: 90625091

17) Rudin (BONESHAG) Tel: 94897264

18) derrick (ROTHMANS) Tel: 97326046

19) Andrew (dinobros) Tel: 91060310 email [email protected]

20) Warren (Warren84) Tel: 98530304 email:warrenla2hotmail.com

21) Murphy (NSR150) Tel:96909435

22) Zac (Aprilia_Y2K) Tel: 98756701

 

1 more added!

 

hey hey hey guys, how about a gathering on X'mas day night.

Tentatively, the time to meet is 8 and the location will be at Far East Plaza's

Burger King. You guys, interested? I will contact those guys on the list on Wednesday! Any others who are interested can call me. I'm the 1st on the list!

 

[ArchArrow]

 

ask me lah...

you can make your milo swallow the arrow pipe at Wing Yap. It's located

along Balestier Road, you gotta check out the exact address dude

altenatively, you can do it at the famous Ideal, but they'll charge you

$300+, whereas Wing Yap charges you $220+.

I dunno the price at JB, but imagine you have to carry the pipe through

the custom hehe

it'll be a funny sight

 

 

dun want sg do too ex liao at most i pillion someone then ask the person help mi hold the pipe lorz. lolx.. haiz yesterday just buang.. argh.. waste money ..

[kyoichi]

hai... xiao xin di dian... raining leh....

[eyz]

 

 

dun want sg do too ex liao at most i pillion someone then ask the person help mi hold the pipe lorz. lolx.. haiz yesterday just buang.. argh.. waste money ..

 

so how are you bro? you're not injured right? take care leh...

as long as you're fine, the bike shouldn't be a worry lah.. at least you still

get to ride

just ride safely lah..

[eyz]

 

hey hey hey guys, how about a gathering on X'mas day night.

Tentatively, the time to meet is 8 and the location will be at Far East Plaza's

Burger King. You guys, interested? I will contact those guys on the list on Wednesday! Any others who are interested can call me. I'm the 1st on the list!

 

 

hey guys, the location had changed.. it will be at Kallang KFC instead.

The time will stay unchange.

So it's at Kallang KFC, time 2000hrs!

[DESMOSEDICI]

 

hey guys, the location had changed.. it will be at Kallang KFC instead.

The time will stay unchange.

So it's at Kallang KFC, time 2000hrs!

 

bro sorry ar.. last min bo gao lang lehz.. gotta work till 2130 ar.. i will b there.. budden kinda late i guess.. mayb u guys go rd 1st.. knock off le call u to c where u guys r.. btw.. i ride a mito.. not aprilia.. hope u all dun mind my presence..

[eyz]

haiya.. mayb the meet also bo gao lang...

msg everyone, only a few replied.. sian 1/2

will have a final confirmation tml, if the respond is not good.. might be

calling off.. but will msg all of them if it's call off

[ArchArrow]

 

so how are you bro? you're not injured right? take care leh...

as long as you're fine, the bike shouldn't be a worry lah.. at least you still

get to ride

just ride safely lah..

 

i okie.. no worry..

 

is it true that aprilia rs 125 must operate pipe then can open valve?? some say yes some say no.. argh.. then operate pipe stomach also operate or just the pipe will do..??

[DESMOSEDICI]

haiya.. mayb the meet also bo gao lang...

msg everyone, only a few replied.. sian 1/2

will have a final confirmation tml, if the respond is not good.. might be

calling off.. but will msg all of them if it's call off

 

kuan ar.. sms mi or gimma a call ar.. gonna work later..

[dinobros]

 

i okie.. no worry..

 

is it true that aprilia rs 125 must operate pipe then can open valve?? some say yes some say no.. argh.. then operate pipe stomach also operate or just the pipe will do..??

 

no need lah. mine original milo can also can open valve....

 

the the diff is when u nearing redline... open valve also no use coz the can restrict the exhaust from flowing

[dinobros]

haiya.. mayb the meet also bo gao lang...

msg everyone, only a few replied.. sian 1/2

will have a final confirmation tml, if the respond is not good.. might be

calling off.. but will msg all of them if it's call off

 

 

aiya i should be goin loh... juz meet up tok tok onli rite???

anyway at home nth to do also haha

 

then can learn alittle from all you expert

[eyz]

it's kinda difficult to open your valve if you're using a normal milo..

cos the rpm is restricted.. you have to drag until very jiak lat..

the better way is to drop gear..

but i think it's not advisable to drag your milo bike lah..

cos 1stly, the air trapped inside the milo will cause your bike to be very

hot.. so the more your drag, the more strain will be on your bike...

[ArchArrow]

 

no need lah. mine original milo can also can open valve....

 

the the diff is when u nearing redline... open valve also no use coz the can restrict the exhaust from flowing

 

 

u sure ur one can open valve anot??? my one original pipe i from gear 3 drag 8.5rpm then cant open any more liaoz.. i even went change valve motor. Then they say must open pipe then valve can open..

[ArchArrow]

it's kinda difficult to open your valve if you're using a normal milo..

cos the rpm is restricted.. you have to drag until very jiak lat..

the better way is to drop gear..

but i think it's not advisable to drag your milo bike lah..

cos 1stly, the air trapped inside the milo will cause your bike to be very

hot.. so the more your drag, the more strain will be on your bike...

 

i using normal one i drag till siao 8.5 rpm max. then drag until clutch plate and housing spoilt sia.. so must operate pipe then can open rite? coz i nw top speed only 120.. argh.. some more is drag one

[dinobros]

 

 

u sure ur one can open valve anot??? my one original pipe i from gear 3 drag 8.5rpm then cant open any more liaoz.. i even went change valve motor. Then they say must open pipe then valve can open..

 

 

unless mine already done up loh... but i dun think mine done up before... i tried 1st 2nd third and forth gear drag til 9k change gear all can then can feel the valve open at 7 k .... so i dun think will have such a prob

 

could it be your valve break liao or too much carbon so cannt open le???

 

u try four or 5th gear cannt go up more then 120 meh?

[DESMOSEDICI]

 

i using normal one i drag till siao 8.5 rpm max. then drag until clutch plate and housing spoilt sia.. so must operate pipe then can open rite? coz i nw top speed only 120.. argh.. some more is drag one

 

i suggest u go service ur valve n carb.. mayb u can drag easily after tt ?

[eyz]

hidden arrow crouching milo, RPM max 12k

I'm still exploring ways to push the limit

might be doing porting to my bike and changing to a Boyesen Dual Stage Reed Valve.

I already mentioned, maybe you can try dropping gear eg. when your in gear 6 RPM 7K, drop 2 gear to 4th gear to open the valve.

But I still advise you to operate your milo or change to a RS or arrow pipe,

cos I really feel that a milo really strain your bike. Your bike feels very hot and the air circulating in the milo really strain the engine.

[eyz]

 

i suggest u go service ur valve n carb.. mayb u can drag easily after tt ?

 

not of much use 1 lah... you tried my Y2K before, right??

how it feels with the RS pipe?

before I sold my bike, I changed it back to the milo, max speed only 110

and I feel I just installed an oven between my legs.

[eyz]

well guys, too bad you all missed out the Aprilia gathering.

Thou the no. of those who turned up were not that significant, but we still

enjoyed it..

shared a lot of stuffs about bikes, envying each other's bikes. We also

visited South Buona Vista, did a bit of riding here and there and finally

settled at Pitstop Bistro for some drinks.

 

I would really hope to see more Aprilia riders to participate in the future

gathering, even though too many of the riders will spoil the fun in riding.

Too many riders on the road is kind of a hazard.

But the more the merrier lah..