[Group] SBF Yamaha X-1r 135

[JackOHJack]

u mean stock can go to 130km/hr?

what tire for dry and wet condition?

 

Bridgestone Battlax or Dunlop TT900 GP - Made in Japan tires pls, not made in thailand ones.

[tonyguy]

Bridgestone Battlax or Dunlop TT900 GP - Made in Japan tires pls, not made in thailand ones.

 

which model for Bridgestone Battlax ?

[k3ndokaz3]

battlax bt39ss

[JackOHJack]

which model for Bridgestone Battlax ?

 

battlax bt39ss

 

Yup! 80/90, 90/80 - remember to check the production date and insist at most 1 year diff. i.e. xx08!!!

 

 

went to local orh diam wanna check just why the fug my bike feel wobbly when >90km/hr!

 

mah la eh zai e bike shop closed today?!?! neh mind, went round to the bike diam behind it instead.

 

Me: Why my bike like that arh?

Mech: Eh? where's the metal plate to hold ur front gantong together?

 

Me: Eh? what metal plate?

Mech: use his hands to show me just how bueh balance the suspension can get, 1 go up, the other go down!!!

 

end up the local orh diam somehow took out the metal plate datz y for the past dung noe how long i have been feeling the wobble!!! :angry:

 

neh mind, install the metal plate @ $18, cheap cheap coz i went with the tot that i gotta change the whole gantong/ rim.

 

I will nehber go back that local orh diam again.

 

Damn, even the EO also cheaper by $2. :dozed:

 

problem solved!!! Fwahahaz!

 

thx bros for ur insights, will keep them in mind!

[tonyguy]

battlax bt39ss

 

what tire size for front and rear?

[tonyguy]

Yup! 80/90, 90/80 - remember to check the production date and insist at most 1 year diff. i.e. xx08!!!

 

 

went to local orh diam wanna check just why the fug my bike feel wobbly when >90km/hr!

 

mah la eh zai e bike shop closed today?!?! neh mind, went round to the bike diam behind it instead.

 

Me: Why my bike like that arh?

Mech: Eh? where's the metal plate to hold ur front gantong together?

 

Me: Eh? what metal plate?

Mech: use his hands to show me just how bueh balance the suspension can get, 1 go up, the other go down!!!

 

end up the local orh diam somehow took out the metal plate datz y for the past dung noe how long i have been feeling the wobble!!! :angry:

 

neh mind, install the metal plate @ $18, cheap cheap coz i went with the tot that i gotta change the whole gantong/ rim.

 

I will nehber go back that local orh diam again.

 

Damn, even the EO also cheaper by $2. :dozed:

 

problem solved!!! Fwahahaz!

 

thx bros for ur insights, will keep them in mind!

 

80/90 or 90/80 are best for front?how about rear?

[JackOHJack]

80/90 or 90/80 are best for front?how about rear?

 

80/90 front, 90/80 rear!

 

i suppose Dunlop TT900 Gp also as ggod - But must be made in japan!!! No Thailand pls!

[k3ndokaz3]

if tony go 4 speed....

and not corner....

u dun need to get go sticky tyre.....

jus get a cheap sotong tyre which is not sticky type....

sure can fly

[k3ndokaz3]

and not to say stock sure can go 140 ezly....

maybe 150

[milktm]

Afternoon all! There's a MUJI sales at Suntec Convention Centre. Prices reduced as much as 60%. Dont miss this sales! Im not working there though, im working at Paragon. Haha.

 

Changing to Dunlop Tyres and Racing footrest lohhhhhhhh.

 

no $$ for sales lei! james pay for mi?? haha

 

u mean stock can go to 130km/hr?

what tire for dry and wet condition?

 

stock can go till 150. i tried be4 alot of times. but when braking take super long distance. for dry n wet best go for battlax 80/90 front n 90/80 rear.

 

but since u wan speed, battlax is not recommended coz its sticky n more towards safety precaution. u wan speed then go for stock tyres is enff. but safety wise, hope u wont end up in hospital thru the speeding. go so fast n get the risk of TP caught u or hospital caught u. wad for? worth it? my 2cent. ride at ur own risk if u wan speed. i still prefer to ride safe.

anyway, if u wan to go fast get those 2stroke bike, easily go till 170. u'll love it if u wan speed.

 

and not to say stock sure can go 140 ezly....

maybe 150

 

yup. true.

[evoscythe]

Jasper your Dunlop tires how much uh? From Japan?

[Jasper514]

$180. done @ Unique. 90/80 front and rear. GOOD! better than battalax. yea, from Japan not from Thailand.

[Jasper514]

Bridgestone Battlax or Dunlop TT900 GP - Made in Japan tires pls, not made in thailand ones.

 

why not made in Thailand? thailand tires aint that bad.

still able to play corner and scrap pipe then. just, its knowing your surroundings and boundaries that makes you realise where and when you can play.

[k3ndokaz3]

anyway....

i now on budget...

so using tt900 thai now....

so far so gd....

except 4 cornering problem...

will drift abit

[Jasper514]

anyway....

i now on budget...

so using tt900 thai now....

so far so gd....

except 4 cornering problem...

will drift abit

 

i never encounter drifting problems man. except wet days. haha.

[k3ndokaz3]

i told u le ma thai made....

[k3ndokaz3]

even though u can feel the drift but it still grippy

u can feel it

[mild_slevin]

battlax bt39ss

 

but mine is BT39F... older model mah?

 

stock can go till 150? drag most of the gears mah? *I'm rather amaze to hear that... saw those X-1R from philppine & malaysia very nice...

USD fork, rear pro-arm, dual front disc brake etc

 

wahhaha able to ride it everyday is a true enjoyment...

Edited May 9, 2009 by mild_slevin

[Kill Bill]

i just changed a new racing footrest (the original yahama) but it seems that the gear part can't be tighten to the max cause if i do, when i kick the gear below.. it wont go up. so i didnt tighten it up much but after every traffic light i had to tighten it back. its so troublesome. tried putting an extra screw washer but its still the same. anyone experience the same? and my bike seems to be having alot of vibration.. due to that my back bracket plate screw drop out.. somebody please enlighten me up.

[mild_slevin]

i just changed a new racing footrest (the original yahama) but it seems that the gear part can't be tighten to the max cause if i do, when i kick the gear below.. it wont go up. so i didnt tighten it up much but after every traffic light i had to tighten it back. its so troublesome. tried putting an extra screw washer but its still the same. anyone experience the same? and my bike seems to be having alot of vibration.. due to that my back bracket plate screw drop out.. somebody please enlighten me up.

 

hmmm are you trying to say that when you try to kick up the gear lever seems to stuck and can't go to normal position?

[Kill Bill]

yessir.. (when its being tighten up. i had to loose it abit so it can move up and down) and you know whats the best thing.. the front screw where the part you kick up and down lever drop off.. and its only the 3rd day i used the footrest..

[Jasper514]

i told u le ma thai made....

 

i meant when i using dunlop tt900, never drift. haha

 

yessir.. (when its being tighten up. i had to loose it abit so it can move up and down) and you know whats the best thing.. the front screw where the part you kick up and down lever drop off.. and its only the 3rd day i used the footrest..

 

oooh, that might be because some nut crashing with the rod, last time i encounter before.

 

try to shift the rod higher so wont hit the nut. you can main stand you bike, let your bike go into 1st gear then you use ur hard shift shift the gears around and find the best angle for the gear lever.

[Kill Bill]

thanks mate. much appreciated. will try it out today. btw, does your pipe vibrate alot? cause i feel my gpr isnt that stable. its like shakey. any idea to get the gpr sticker for the exhaust pipe anyone? mine somehow crumple off with the pipe.

Edited May 9, 2009 by Kill Bill

[blackflys]

thanks mate. much appreciated. will try it out today. btw, does your pipe vibrate alot? cause i feel my gpr isnt that stable. its like shakey. any idea to get the gpr sticker for the exhaust pipe anyone? mine somehow crumple off with the pipe.

 

try going to shop ask them to lathe for u spacer out of motivational slider material.... reduce vibration but not totallly

 

anyway....

i now on budget...

so using tt900 thai now....

so far so gd....

except 4 cornering problem...

will drift abit

 

try this tyre for size..... IRC EAGLE WINGS.... im not kidding or playing around compound is the same as battlax if not better then battlax.... used and abuse this set of tyres.... cheap and good.... u seen me ride b4 ken so i hope u trust me hehehehe.... 30 for a tyre.... try to believe

[kurarensu]

i dun trust this brand irc.. tyres not round enuff and dosent grip as well as other tyres.. maybe this model nv try b4.. haha

 

but i know irc sotong tyres r gd haha