Honda NSR250 Riders

[ZeroKenshin]

wolf

 

y not just get the PGM & i guess u wunt regret...haha

 

b on pgm 4 years ++

 

i guess one thing i can say

 

lottsa time money & love

 

the rewards is sweet

 

no top speed we ok

 

being seen as trouble maker on the road its ok

 

its a legend we ride

 

cant seem to let it go

 

many times i wanted to sell

 

still 2day after 4 years ++

 

i still wan to say

 

PGM U ROCK BIGTIME!!!

 

with love

from a passionate PGM rider

 

 

 

 

Passion~ Damn straight

[zx7]

to zx

 

eerr soorrie ah hellfire, go sample on http://www.nsr-world.com for pgm derestrict...from what i can recall....a pgm wo HRC card with mc21 lighten flywheel, reeds, stuffer, pipes etc can derestrict untill 58bhp.

 

Refer to http://www.tygaperformance.com for more info.

 

Just my 2cts. However in doubt for extensive tech assistance, pls PM HRCSGP for more info..............

 

Thanks bro.

[zx7]

Stay stock man bro.. haha.. cos mine's stock as well..!!

 

Initially when I bought the bike, I tot stock should be ok. But now very itching to try revving to 12000 rpm. By the way, what is the max rpm you can rev on a stock bike with stock card?

[vondy]

Initially when I bought the bike, I tot stock should be ok. But now very itching to try revving to 12000 rpm. By the way, what is the max rpm you can rev on a stock bike with stock card?

 

Mine? top gear 12000rpm lor.. at ard 11500k rpm, my meter alrdy hit 180km/hr le.. dun think need hrc card to rev to that rpm ba..

 

Unless u wanna reach 13k or 14k.. then u wuld have to mod mod ur bike quite alot lo.. that shuld be ard 200km/hr++++

[vondy]

to vondy

 

yah lor...sigh...since no one interested then i just round up an informal outing wif xiaofire, you(vondy), keraking & nsr......how? got any nice place u guys wanna go???

 

haha.. bo bian leh.. aiya.. im fine with anything.. ehh.. how bout that dunno dunno wad hill leh? haha.. u decide la..

 

but hor.. one thing is that my bike's handling abit "crispy" nowadays leh.. i dunno wad happened.. shaking all over when cornering..

 

see bends also see my fairings also see my tires also *speechless*

 

worst is see my pocket..!! :cry::cry:

[vondy]

Guys, if u happen to know the approximate pricing / cheap lobangs of these parts pls let me know..

 

1) Bearings in the steering cone ( i dunno wad its called)

2) Bleeding of brake pump

3) Servicing front forks

4) Rebuilding rear suspension / Any ways to make it Harder!

5) 2nd hand brake disc / cheap 1st hand (mine abit dented)

6) Dampers

7) Bt090 tires

 

Thanks!

[KeraKing]

1st u have to find ur source to get the hrc card first if not nothing can be done. btw i still finding it also. haha.. hrc card has already discontinue liao.

 

or juz use pgm3 cdi n wiring n meter if u want?

[KeraKing]

 

but hor.. one thing is that my bike's handling abit "crispy" nowadays leh.. i dunno wad happened.. shaking all over when cornering..

:cry::cry:

 

bro if rear shaking when corner it maybe the swing arm hub /wheel bearing or whatever its called.. the bearing for the rear wheel is aredi need to change..

u try check if the wheel quite loose can move a bit right to left.

[jerkeel]

Guys, if u happen to know the approximate pricing / cheap lobangs of these parts pls let me know..

 

1) Bearings in the steering cone ( i dunno wad its called)

2) Bleeding of brake pump

3) Servicing front forks

4) Rebuilding rear suspension / Any ways to make it Harder!

5) 2nd hand brake disc / cheap 1st hand (mine abit dented)

6) Dampers

7) Bt090 tires

 

Thanks!

 

1)steering cone bearings they r called=Ard 50 to 80 wif labour?

2)Bleed= ard $50?

3)Bikelab=100plus per forks, outside maybe 80

4)rear shocks quite standard= ard 280=HKL, Bikelab etc

5)2nd hand discs call me privately

6)Damper call me

7)call me too

[jerkeel]

bro if rear shaking when corner it maybe the swing arm hub /wheel bearing or whatever its called.. the bearing for the rear wheel is aredi need to change..

u try check if the wheel quite loose can move a bit right to left.

 

Jib, mc28 should be hub.....no wheel bearings...mc21 got wheel bearings....depends on pro arm or swing arm

[KeraKing]

yup.. single arm also have bearings.. maybe hub bearings..

get those checked

[zx7]

Mine? top gear 12000rpm lor.. at ard 11500k rpm, my meter alrdy hit 180km/hr le.. dun think need hrc card to rev to that rpm ba..

 

Unless u wanna reach 13k or 14k.. then u wuld have to mod mod ur bike quite alot lo.. that shuld be ard 200km/hr++++

 

For my bike, can only rev to about 10000++ rpm. Did you do any mod to your bike in order to rev to the rpm you mentioned?

[zx7]

or juz use pgm3 cdi n wiring n meter if u want?

 

Hi bro, do you know anyone who knows how to convert and roughly how much it will cost?

[KeraKing]

Hi bro, do you know anyone who knows how to convert and roughly how much it will cost?

 

hrcsgp shud know.. try asking him..

 

 

guys what other premix 2t bottle got measure at side and somekinda funnel like motul?

motul bottle very convinient for premix.

 

does 747 have this two features?

[Tortise]

guys what other premix 2t bottle got measure at side and somekinda funnel like motul?

motul bottle very convinient for premix.

 

does 747 have this two features?

yes 747 does

[barefoot]

if u use stock esp mc28 not much diff compared to nsr150?

Only slightly faster

 

seriously serious?

heart just got shattered

[759]

seriously serious?

heart just got shattered

 

o.O if ur comparing both stock pgm alr like twice or more the power liao lei... how can be slightly faster nia... my sp last time mod till siao oso tio tia by stock pgm

[vondy]

For my bike, can only rev to about 10000++ rpm. Did you do any mod to your bike in order to rev to the rpm you mentioned?

 

hmm.. nope.. although i did overhaul etc. but everything was stock..

erm.. mayb the stomach emptied? or increase abit of my fuel jetting? i dun think any mods were done to my bike..

[vondy]

bro if rear shaking when corner it maybe the swing arm hub /wheel bearing or whatever its called.. the bearing for the rear wheel is aredi need to change..

u try check if the wheel quite loose can move a bit right to left.

 

Nope.. mine is more onto the front.. my handle bars.. rear bearings still alright..

[vondy]

o.O if ur comparing both stock pgm alr like twice or more the power liao lei... how can be slightly faster nia... my sp last time mod till siao oso tio tia by stock pgm

 

Both stock? where gt 2X the power only? i think much much more la.. provided the condition of the pgm is good.. i think by gear 3, sp can see 2 red dots nia.. haha..

[vondy]

Hello everyone...!!! its a long weekend, any outings? haha..

[Sesshou]

with hrc card and jha rs force pipe, you can easily clear your rpm meter. but sad thing is that both these item can't get it liao.

[KeraKing]

yes 747 does

 

haha juz bought motul 800 jz now for $28..

poured a lil bit more than the reccommended 20ml/l

now got some smoke alredi, compare to 710..

if not scary man 2stroke no smoke

[vondy]

with hrc card and jha rs force pipe, you can easily clear your rpm meter. but sad thing is that both these item can't get it liao.

 

huh? how bout settings, carb, jetting etc. ? dun have to change?

[vondy]

haha juz bought motul 800 jz now for $28..

poured a lil bit more than the reccommended 20ml/l

now got some smoke alredi, compare to 710..

if not scary man 2stroke no smoke

 

think ubetter stick with ur "little more thanb 20ml/L" lol..

 

but how's the respond? better? or a little stuck due to too much 2Ts?