motorise D.I.Y chain oiler aka "scott-oily" Version 1.

[ProFatSir]

ladies and gentlemen

the long await motorise D.I.Y chain oiler aka "scott-oily"

 

this time i am doing a dual side oiling on the chain.

 

a push button switch will be install to the bike handle

(prefer point to mount is @ the bottom of the signal light switches)

 

why i choose 3V battery?

 

no cutting of existing cables on bike!

can be remove when not needed

 

press the button when you think is time to oil when travel.

eg

travelling on road just press the push button switch for 2 sec and the oil will flow onto the chain 1 whole round(depends on speed)average on 50km/h

 

 

 

material costing

 

1.1 x fuel pump -25sgd

 

2.1 x daiso alu bottle-2sgd(from last project)refer to diy oiler for bottle making)

 

3.2 x air valve-2.40sgd

 

4.2m x air hose-1sgd

 

5.2m x 1.5mm electrical cable-5sgd

 

6.1 x Y-joint -0.30sgd

 

7.2 x hose jointer-0.40sgd

 

8.1 x AA battery holder-2sgd (i got old holder $ save)

 

9.2 x AA battery-3sgd(you can use a cheaper 1)(i still got battery)

 

10.zip ties-2sgd (i still have)

 

11.1 x push button switch-2.50sgd(i got 50pcs left)

 

total-45.10sgd

 

total amt i spend-36.10sgd

 

 

REVIEWS

 

 

http://photos-a.ak.fbcdn.net/hphotos-ak-ash1/hs295.ash1/22274_284792801543_694486543_3396650_612695_n.jpg

 

12V battery use(assume connected to bike battery)

 

very fast flow rate even with the electrical cable inside.

its like a shower head splashing water at you.

 

--------------------------------------------------------http://photos-e.ak.fbcdn.net/hphotos-ak-ash1/hs295.ash1/22274_284792821543_694486543_3396652_3566617_n.jpg

 

9V battery use

 

slower rate than 12v but i still find it too fast

 

 

--------------------------------------------------------

 

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs235.snc3/22274_284792811543_694486543_3396651_4185587_n.jpg

 

3V battery use

 

the rate is just nice.

[ProFatSir]

switch/the red push button

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs145.snc3/17243_488643200112_874490112_11330654_207195_n.jpg

------------------------------------------------------------------------------

 

Network of hoses running from the reservoir to oil pump to the chain

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs145.snc3/17243_488643205112_874490112_11330655_5467307_n.jpg

--------------------------------------------------------------------------------

 

Hoses tied onto the swing arm. Now comes in red colour!

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs145.snc3/17243_488643215112_874490112_11330656_7993842_n.jpg

--------------------------------------------------------------------------------

 

Nozzle of the chain oiler hose aimed directly at the chain.

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs145.snc3/17243_488643230112_874490112_11330657_2098597_n.jpg

Edited February 14, 2010 by ProFatSir

[ProFatSir]

reserve for more updatess....

[ProFatSir]

kindly wait for the bike installation pic.kind of busy lately.

[zoobay]

bro lu macam nutty professor ah

[xXxRatedxXx]

bro lu macam nutty professor ah

 

no ah.. more like mac guyver. http://www.appart.com/Blog/image.axd?picture=2009%2F6%2Fmacgyver.jpg

[ProFatSir]

pics is up.

any question i will do my best to reply

[shahrul_azmil3]

when diy session ??

[xXxRatedxXx]

when diy session ??

 

Expect it sometime after CNY week bro. Ride safe!

 

Skarang nak Merayakan Tahun Baru Cina...

[ProFatSir]

when diy session ??

 

u interested in the electric oiler?

go get the stuff and can start diy

Edited February 15, 2010 by ProFatSir
stucc to stuff

[shahrul_azmil3]

it practically not cash savy if i have to buy all the tools too ...

 

drill , t wrench ....

 

so i rather wait for the mass diy session yah ....

 

can use ows water bottle or not ??

[ProFatSir]

it practically not cash savy if i have to buy all the tools too ...

 

drill , t wrench ....

 

so i rather wait for the mass diy session yah ....

 

can use ows water bottle or not ??

 

you wanna do the electric or the manual oiler?

[Danny29]

bro if u do for me, how much u charge?

[E-mysterymachine]

Hi bro nice job.If there are plans for mass DIY let me noe aite.

[ProFatSir]

Hi bro nice job.If there are plans for mass DIY let me noe aite.

 

 

thanks a lot! appreciate it a lot.

i think a mass diy will be hard.

ppl cannot make it to the date.

all the info is here.get the things and diy it yourself

[Limsteel]

Great work...

 

but If the Oil reservoir is mounted higher then the chains, you don't need a oil pump. Let gravity do the work.

 

I have intention (but no time) to mod my manual control oil to automatic.. I already bought a fuel valve (Skipper 125), connect it to the carb, So once engine starts, the suction from the carb will open the fuel valve and oil will start flowing. But no time to do la.

 

This cut the need for wiring and battery change...

 

Mass DIY - Org once... only 1 turn up. hahahha!

Edited March 5, 2010 by Limsteel

[ProFatSir]

Great work...

 

but If the Oil reservoir is mounted higher then the chains, you don't need a oil pump. Let gravity do the work.

 

I have intention (but no time) to mod my manual control oil to automatic.. I already bought a fuel valve (Skipper 125), connect it to the carb, So once engine starts, the suction from the carb will open the fuel valve and oil will start flowing. But no time to do la.

 

This cut the need for wiring and battery change...

 

Mass DIY - Org once... only 1 turn up. hahahha!

 

thanks

 

there is another thread with no electric pump,using gravity law.

pls see here.

http://www.singaporebikes.com/forums/showthread.php?t=276033

 

i do the electric is to show ppl using a pump will also work.

the pump will stop the action if not turn on.

 

no need to turn on/off , before/after riding(if forget to off,chain oil will drip all over the floor)

just press the switch when need to oil the chain.

 

so far so good.

[ProFatSir]

btw i tap direct to ignition.fast flow......

[avantgarde120]

Great work,should be made a sticky,btw,where to buy the electric pump?Thanks!

[aar0n]

upss upss. recommend for sticky. if got installation session, pls help me, i love to have a oiler but a total technie idiot.

[shahrul_azmil3]

where to get the fuel pump ??

[ProFatSir]

fok hai building.RC shop

[shahrul_azmil3]

thanks .... it's more of fook hai building .... near chinatown .... as on streetdirectory ...

 

any idea if its sold at a fish store ?

[ProFatSir]

thanks .... it's more of fook hai building .... near chinatown .... as on streetdirectory ...

 

any idea if its sold at a fish store ?

 

this pump is for rc planes.do you think it will sell @ fish shop?

[.BlackSun.]

HAHAHA, try asking for arrowana rim