[Discussion] Carburetor

[lwkjason]

Need advise:

 

If I've changed to leovince exhaust and knn filter, do I need to change to a bigger jets/needles? What happen if i remain with the current jets/needles?

[confusehaha]

Need advise:

 

If I've changed to leovince exhaust and knn filter, do I need to change to a bigger jets/needles? What happen if i remain with the current jets/needles?

 

Shouldnt be an issue to retain the old jetting, might just require a higher setting/richer setting to compensate the pipe.

[super78]

Hi everyone my friends told me when you tune your carb properly your S4 can run about 400km full tank.He say the bikeshop around bukit merah blk 3005 anyone got any idea?

[super78]

Sorry is blk 1005

[boymay22]

Can CB600 carburetor direct fit to cb400sf??

[Lau Teck Seng]

Hi all,

Anyone encounter the S4 bike sound listen like "Subaru" not a "Honda"....

Cos today service carburettor and tuning, as previously when throttle respond like turtle, now like rabbit!

Feel the speed increase and respond fast also, but the sound becomes difference. Is this normal?

Anyone have the experience before?

Thanks in advance.

[boymay22]

Hi all,

Anyone encounter the S4 bike sound listen like "Subaru" not a "Honda"....

Cos today service carburettor and tuning, as previously when throttle respond like turtle, now like rabbit!

Feel the speed increase and respond fast also, but the sound becomes difference. Is this normal?

Anyone have the experience before?

Thanks in advance.

 

what parts did mechanic changed during servicing

[wayne_udomin]

Hi all,

Anyone encounter the S4 bike sound listen like "Subaru" not a "Honda"....

Cos today service carburettor and tuning, as previously when throttle respond like turtle, now like rabbit!

Feel the speed increase and respond fast also, but the sound becomes difference. Is this normal?

Anyone have the experience before?

Thanks in advance.

 

Any connector nv fix properly ...but u say the power still thr..

[Lau Teck Seng]

what parts did mechanic changed during servicing

just change all the 4 pin attach with the black color PVC type thing and the black color PVC type inside the carburetor.

 

Any connector nv fix properly ...but u say the power still thr..

Had check, no abnormal found. power is great! just the sound listen become difference during RPM 2~5k. above 5k will be difficult to hear difference.

[d.r.i]

just change all the 4 pin attach with the black color PVC type thing and the black color PVC type inside the carburetor.

 

 

Had check, no abnormal found. power is great! just the sound listen become difference during RPM 2~5k. above 5k will be difficult to hear difference.

 

Mind sharing which shop and costs?

[muhdshukry]

I don't know if there's anyone else who's facing the same problem as me, but here goes.

 

My Super 4 PB1 starts as per normal with a single push of the starter when it's cold. But when it's hot, for example when after I pump petrol and start it again, I'd have to turn my throttle a bit for it to start.

 

My last carburettor service was a year ago. It's really not a big deal to me, but I'm just wondering if I'm missing something.

[Lau Teck Seng]

Mind sharing which shop and costs?

 

COMBINE motor trading. located at sin ming auto care lever 2. once u reach lever 2 turn right and the shop is 3rd shop after u turn right. cost is 300. usally cost able 150~200 or less then 100 if no part to replace/change.

[ducktale83]

COMBINE motor trading. located at sin ming auto care lever 2. once u reach lever 2 turn right and the shop is 3rd shop after u turn right. cost is 300. usally cost able 150~200 or less then 100 if no part to replace/change.

 

Combine do setting very gd..esp ah hock but the price abit pricey:)

[Lau Teck Seng]

Combine do setting very gd..esp ah hock but the price abit pricey:)

yes....... Their even not using any equipment to check or see, just base on listening then can do tuning liao!

[ah_xia_kia]

Anyone have any ideas where to buy 2nd hand carb? Tks.

[XxPJYxX]

Anyone have any ideas where to buy 2nd hand carb? Tks.

 

eBay got a lot. U ah xia Kia, no need scared of the high shipping costs. Lol.

[wayne_udomin]

Anyone have any ideas where to buy 2nd hand carb? Tks.

Wat prob yr carb bro....?

[keown]

hi,

i dont know where to post but i will start here since i suspect it is carb problem that my spec3 encountered.

 

Firstly, i notice my bike sound like subaru as what a forumer mention here, i suspect some misfire, so i use wet tower to check my header temperature,

 

sure enough, one of the header not heat up, engine vibrated than normal. idling low. no power loss though. so i try luck, change all spark plugs today.

 

but the header still no heat up same problem. i suspect one of the cylinder not firing..anyone here can comment.

 

i decide next few day when i off, going to sent to planet motor to see how.

[singkiwi]

You need 3 things for a cylinder to fire.

Spark

Fuel

Compression

First remove the spark plug cap and insert a plug, crank the bike over, can you see spark?

Second, go for a ride, remove the plug, is it wet can you see fuel?

Third do a compression test

 

I would suspect its something simple like a dead plug lead, maybe a coil?

 

Cheers

[vtec88]

Anyone need used vtec 123/ver s carbutor

 

whatapps 9875 9408

 

https://www.facebook.com/pages/Vtec88-Used-Bike-Parts-Broquet-Fuel-Charger/415899711838681

Edited March 9, 2014 by vtec88

[ah_xia_kia]

Anyone need vtec3 carbutor sms 9875 9408

 

How much you selling?

[pak_tam]

Hi guys,

Will changing my carburetor from stock to aftermarket like yoshimura have any different to my bike?

 

Sent from my C6603 using Tapatalk 2

[XxPJYxX]

Hi guys,

Will changing my carburetor from stock to aftermarket like yoshimura have any different to my bike?

 

Sent from my C6603 using Tapatalk 2

 

Higher fuel consumption... So instead of 18km/liter, it will be about 15km/liter... Pickup faster, top speed maybe faster... But go so fast on super 4 for what? U wan go fast, sports bike is more stable when going fast... And the yoshi carb cost about $1800 excluding shipping fee...

[CBX6]

Anyone know a shop that can tune Keihin Roundslide Special CR Sidedraft Carburetors?

Tuning for this racing carb is different then for normal carbs, they need to be bench tuned meaning that there is no access for a synchronize kit. You can sync them by CO testing or temperature at the headers. I guess I need to change needle but I need to leave this to a specialist.

Any suggestions are welcome, I have all manuals if that helps.

Thanks

CBX6

 

http://www.sudco.com/images/cr.jpg

[R-6]

wheres this ah pek workshop