Paint For Rusty Exhaust

[S750WP]

The high temp paint doesn't seems to live up to its expectation.

 

Will see if the rust master works to prevent new rust forming again.

[STORM]

The high temp paint doesn't seems to live up to its expectation.

 

Will see if the rust master works to prevent new rust forming again.

 

dun use the rust master for the headers cos it doesnt withstand heat!

i personally tried that method b4, give three coat of rust master then spray three coat of rj brand high temp spray...thought it will work..after three days can see everything melt...waste my time only..haizzz

i reconmend u to use the spajard brand high temp manifold spray..IT WORKS!!...my headers have been black for three months already(A very satisfied customer of spajard)

[S750WP]

I use the spajard paint also. Bought at Mah opp SLT for $10.

 

The colour of the header turns from black to grey now, some already came off.

[STORM]

I use the spajard paint also. Bought at Mah opp SLT for $10.

 

The colour of the header turns from black to grey now, some already came off.

 

maybe its bcos of the rust master u coated on earlier.for me i just sand away the rust, try to make sure no debris no the headers then spray the manifold spray three thin layers.

it was shiny black at first then it turn matt black...after three mths its still staying strong.

[Guest Jade]

 

maybe its bcos of the rust master u coated on earlier.for me i just sand away the rust, try to make sure no debris no the headers then spray the manifold spray three thin layers.

it was shiny black at first then it turn matt black...after three mths its still staying strong.

 

erm...how does one remove the headers for S4 ah?

[guyver]

After 3 days, the stinking smell diminished. The colour of the pipe turns grey, can see some paint shed off exposing the metal underneath already.

 

I tried a hi-temp black spray paint... already about 1 mth after respraying... still black... the whitish-brown thingy are dirt... so i'll find a time to clean it and see whether is it still as black. No paint peeling tho.

[S750WP]

Its a total failure, wasted my time and effort, can see rust again.

[STORM]

 

erm...how does one remove the headers for S4 ah?

 

i just spray it without removing the headers, just wrap newspaper n masking tape....hehe lazy

[kata_killer]

I have also done tat n up to now, no rust yet... Up to now, 3 mths liao....

[S750WP]

The first attempt failed, the pipe rusted after 2 month, same as before.

 

The second attempt, the pipe still looks matt black after 3 weeks, still monitoring. This time I only sand and spray a few coats of high temp exhaust paint.

 

I guess rustmaster cannot coexist with high temp paint.

[E-DEAD]

how abt s4 head using high temp spray will fade i mean within a mth

[S750WP]

how abt s4 head using high temp spray will fade i mean within a mth

 

I heard it will stay matt black for more than 6mths. Remember just sand and spray with high temp paint (brand name is Spanjaard), do not use rust master.

[Richard]

Hi, u guys may try using epoxy adhesive even for those rusty pipes with holes... its metal putty.

It should work very well to prevent rust;its waterproof,heatproof,...

and i juz bought it for a mere dollar!

 

For more directions, u can check out its package 4 instructions.

 

U will no headaches on the pipes soon.

[Richard]

Hi, u guys may try using epoxy adhesive even for those rusty pipes with holes... its metal putty.

It should work very well to prevent rust;its waterproof,heatproof,...

and i juz bought it for a mere dollar!

 

For more directions, u can check out its package 4 instructions.

 

U will no headaches on the pipes soon.

[ekin101]

Hi all, I just spray my s4 pipes with Spajaard spray. after 4 hours, I went riding to orchard. I spotted that my 4 pipe top part becomes grey due to the heat but the bottom still black. Is this normal? Bubbles olso start to form on those parts which I spray too much. Don't really look nice liao.

[bo]

Hi, u guys may try using epoxy adhesive even for those rusty pipes with holes... its metal putty.

It should work very well to prevent rust;its waterproof,heatproof,...

and i juz bought it for a mere dollar!

 

For more directions, u can check out its package 4 instructions.

 

U will no headaches on the pipes soon.

 

where to buy that eproxy adhesive?

[Bieffe]

Exhaust being steel based no matter how you spray or put anti-rust also will rust again. Due to heat, the steel becomes more readily reactive to oxygen and moisture in the air so cannot be help.

Maybe the best deal is to chrom the whole exhaust? I thinking of chroming my whole scooter exhaust....hopefully below $300...need to find source.

[Terrible One]

Will the paint come off if it comes in contact wif fuel??I abit blur seeing soo many post...so wat brand is the best so far??I'm not worring abt rust..I jus wan black exhuast...haa

[cheeky]

For those who were successful, maybe you can compile all the steps, tools that are needed into the knowledge base directory. It would be best coz I juz got my s4 and wanted to learn more....

[Legan]

Anyone knows the tools required for removing the whole exhaust?

[ultimax]

Anyone knows the tools required for removing the whole exhaust?

 

what bike are you riding?

[Legan]

Super 4 Vtec. Did it once and remembered it was very difficult to reach the screws. However was doing with friend and don't remember what tools should be used. Think those T type handle ones are ok?

[kata_killer]

If anyone wish to do up ure header, respray, U can always meet me up n do it together. I can help U.... I have all d tools. Has already help a few SBF members to do it. Can ask WX and etc

 

If U wish to do it, U can always PM me.

[kata_killer]

Legan: U R required to have d bolt n nuts tools sizes from 10 -14 and one full sets of Alan keys, two screw drivers;cross and straight one, 1 bottle high temperture spray, 4 piece of sandpaper and some newpapers. Tat's all... It's take abt 6 hrs to do it plus leaving it to dry...

[ultimax]

Kata,

 

how many coats of Hi-Temp spray should I apply? And 1 can's enough to do the header + muffler right? Me riding WR200.