Motor Tiam Rating

[Tycoon]

Anyone tried JOON SENG MOTOR TRADING?

BLK 7, 397-C, Woodlands Road,

Yew Tee industrial Estate

 

My friend recommend me to go there.

Anyone been there before?

Give some comment leh

[wheeze]

Anyone has recommendation on workshops that are good with big bikes?

[HLC]

Anyone has recommendation on workshops that are good with big bikes?

 

 

 

 

you got pm....

[Iori Yamagi]

any shop to recommend for tuning SP carb? my FC very high, will this help my bike?

 

last thing i want is for the mechanic to open the engine and start telling me to change a bunch of parts that dont need repair.... any trustworthy shops to recommend?

 

Agree!I already kena twice!Tell mi this spoilt that spoilt..Do serivcing twice within 1 week u say leh??sianzz..till now tunning not done for my sp..so piss off.. Best is my FC is usually hit 210km without reserve with OPEN pod filter..now with original airbox drop to 165/170 WTF! Pls some can advise?really need help

[HLC]

Agree!I already kena twice!Tell mi this spoilt that spoilt..Do serivcing twice within 1 week u say leh??sianzz..till now tunning not done for my sp..so piss off.. Best is my FC is usually hit 210km without reserve with OPEN pod filter..now with original airbox drop to 165/170 WTF! Pls some can advise?really need help

 

 

 

 

 

u got pm....

[Iori Yamagi]

u got pm....

 

Went HLC for my sp problem which bugging mi since the day I got my bike.. Reach there Kevin saw mi n straight ask his mech to check on my bike.. ( forget ask name)ask mi wat the problem.. Told him my curb problems n fc went down very much.. Open my curb n check everything was wrong for the jetting.. Etc etc etc.. Very friendly n I really very happy after that.. Thks Kevin n HLC mech

[HLC]

Went HLC for my sp problem which bugging mi since the day I got my bike.. Reach there Kevin saw mi n straight ask his mech to check on my bike.. ( forget ask name)ask mi wat the problem.. Told him my curb problems n fc went down very much.. Open my curb n check everything was wrong for the jetting.. Etc etc etc.. Very friendly n I really very happy after that.. Thks Kevin n HLC mech

 

 

 

 

 

No problem bro,this is small issue only.Hope the fc for ur bike can br improved and in future if u need anything u can feel free to call kelvin 90148138/64844842 and i will be there to help u.Anyway the mech who help u is ah ler.Hope to see u soon bro and ve a nice weekend bro.Regards.

[Iori Yamagi]

No problem bro,this is small issue only.Hope the fc for ur bike can br improved and in future if u need anything u can feel free to call kelvin 90148138/64844842 and i will be there to help u.Anyway the mech who help u is ah ler.Hope to see u soon bro and ve a nice weekend bro.Regards.

 

Big issue to mi which bugging mi for months already..really thks Ah ler and u guys..Sure will contact u again if anything bro..Thks

Edited April 24, 2010 by Iori Yamagi

[HLC]

Big issue to mi which bugging mi for months already..really thks Ah ler and u guys..Sure will contact u again if anything bro..Thks

 

 

 

 

 

Any problems just come back to me...cheers and take care.

[gwabbie]

im staying at toa payoh. any good workshop around my area who can do cubs and phantom?

[zenon469]

any good motor shops in the west to recommend for buying used sp??

[HLC]

any good motor shops in the west to recommend for buying used sp??

 

 

 

 

 

you got pm....

[HLC]

im staying at toa payoh. any good workshop around my area who can do cubs and phantom?

 

 

 

 

 

you got pm....

[4th_Espada]

im staying at toa payoh. any good workshop around my area who can do cubs and phantom?

 

there's a reliable mechanic at a small shop in caltex stn at braddell there near the sph...called HE XIN i think..very good mech..but must be patient la if got alot of bikes coz he alone..

[xue ling]

there's a reliable mechanic at a small shop in caltex stn at braddell there near the sph...called HE XIN i think..very good mech..but must be patient la if got alot of bikes coz he alone..

 

the caltex is just beside SPC? think i've been there b4, recommended by a fren. very good and honest mechanic. went to overhaul my sp there once. came back few days later and he showed me (w/o me asking) the parts that he had changed instead of discarding it.

[4th_Espada]

the caltex is just beside SPC? think i've been there b4, recommended by a fren. very good and honest mechanic. went to overhaul my sp there once. came back few days later and he showed me (w/o me asking) the parts that he had changed instead of discarding it.

 

yup tts the one..

[Snoek]

the caltex is just beside SPC? think i've been there b4, recommended by a fren. very good and honest mechanic. went to overhaul my sp there once. came back few days later and he showed me (w/o me asking) the parts that he had changed instead of discarding it.

 

Thx for sharing !

[gwabbie]

there's a reliable mechanic at a small shop in caltex stn at braddell there near the sph...called HE XIN i think..very good mech..but must be patient la if got alot of bikes coz he alone..

 

the caltex is just beside SPC? think i've been there b4, recommended by a fren. very good and honest mechanic. went to overhaul my sp there once. came back few days later and he showed me (w/o me asking) the parts that he had changed instead of discarding it.

 

thanks for the recommendation! will drop down soon and try out his service!

[super78]

Anyone went to Unique Motorsports @ Toh Guan before?Gather quite alot of of gd feedback of them.I used to go to HKL for servicing but always crowded so might try Unique because located very near my hse.

[sxnbrowser]

Hi,

anyone can recommend good scooter service shop along yio chu kang road? wat time they close usually? I can only go after 7pm...

 

Thanks...

[duperman]

any bike shops that is able to wash my rvf headlight cover? making it clear again.....I heard K&T does it...any others?

[happyboy88]

if have pls tell me thanx also want a gd shine.

Edited May 20, 2010 by happyboy88

[eddarwin]

Workshop – Wing Yap Motors, 627 Balestier Road

Technician – Lai Tin Cheong (the only guy who walks with a limp in the shop)

 

On Sat I got my bike towed to a workshop near my house because it wasn’t able to start. After the technician checked my bike, he told me that I need to change battery + magnetic coil + base plate. For doing the above, he needs to remove the black oil as well. The total bill would come up to $450 including $50 for workmanship. I asked if he could help me save $$ and he INSISTED that if I do not change all the parts he mentioned, I would not be able to start my bike again.

 

About an hour later I told him that I would prefer to scrape my 9 year old bike because I did not think it was worth paying that amount for repairs. He then proposed changing to cheaper parts and the total bill would add up to almost $400. I told him that I would give him an answer on Monday.

 

Monday morning he called me on the phone and I insisted on scraping. He then claims that he can help me reduce the bill to $290 for changing the battery + magnetic coil. He assured me that it was not necessary to change the base plate because he "has good skills as a technician". I told him specifically not to do any work on my bike until I reach the workshop.

 

I went down to the shop with the intention to bring my bike to my regular workshop. The moment I reached, the technician told me to pay $125 at the cashier. The breakdown of the charges are; $30 for towing, $55 for battery and $40 workmanship for changing the battery. I shall not post details of my argument with the technician but end of the day he reduced the workmanship to $15.

 

I cannot help but to feel that he was trying to use scare tactic to get me to change unnecessary parts. If his great workmanship can make up for old/ worn out parts why didnt he mentioned earlier, I am sure alot of people would be Queuing up for him to service their bike. Given my experience above, I feel that the technician cannot be trusted.

[4th_Espada]

sorry to hear that eddarwin...thanks for sharing man..

[burboy]

Date: May 2010

Shop Name: Sunrise Eurobike

Address: Kallang Ave

Phone Number: 6299 3252

 

What service/product did you purchase?

Piaggio Gilera Runner

Full service

Normal maintenance

 

Level of service: 8

Level of knowledge: 8

Level of value for money: 9

How happy are you overall? 8

 

What makes this shop commendable?

Very friendly mechanic.

Affordable repair cost.

 

Look for Alan or ah xiong(supervisor)