[Group] YAMAHA RXZ

[shahrul_rXz]

Originally posted by indiewhispers@Jan 1 2007, 02:34 PM

kedai gerek? so far my MP outrider instructor told me.. kat sin ming near LTA there.. ada like multi storey building.. 3rd floor.. if im not wrong his name is Ah Huat. he say there do slow but good. i never been there cos never had e time.

 

JB quote kau rm650 change conrod and piston stuffs or overhaul engine? kat mane seh? my fren say overhaul engine is about 300+. change new block about 200++. so if like overhaul everything its about 600+rm. if just change conrod and piston stuffs rm650 mati ah... kedai mane nie?

kedai along, 2 shop down ahboy baru...

die ckp dgn aku tukar conrod dgn bearing tu smue...

dgr pun terkejut sampai tu mcm mahal.

my fren also recommend at sin ming but not sure which shop, hahaha nvr been there also..

 

anw thank for the info...

[bloodybaguz]

Originally posted by shahrul_azmil3@Dec 31 2006, 02:48 PM

maaf kerna ku tak leh join korang for the outing ....

 

bila ku dar tukar tyre ku join k ... tyres not not the good for long distance travel .....

 

normal outing pun nak kena tukar tayar mcm

nak gi touring kat thailand je hehehehehehehehe

[bloodybaguz]

Originally posted by faris@Jan 1 2007, 03:13 AM

if outing around singapore call me k lan!!!

ok ar. but lepak at jb better wat everything cheap.

[Hyp3Soul]

Originally posted by indiewhispers@Jan 1 2007, 06:47 PM

yeah so far all those tuning infos makes sense.. after all theres alot of jets in e carb and they are interconnected since all affects the air-fuel mixture at different stage of throttling..

 

so can somebody tell me if i am right.. i am using standard jetting 210. basically my carb is standard. but my bike cannot move smoothly at 4rpm.. need to throttle fully before it goes above 4rpm. my fren helped me tune my bike.. its abit better now but he say the air jet open very big oredi..

 

then my fuel consumption improve from 190km to 220km.so we came to a conclusion. either the block is ported or oversize, OR the piston size is too big. are we right on this? or we just suck at tuning and figuring out? hahaha!

 

information you guys can refer to before solving the mystery of my bike:

 

carburetor: main jet standard size. mech say no port. but then dunoe if he set the needle jet correctly? i mean can move it up and down right? also he lowered down the carb fuel float so more fuel can go in. because last time cannot kick start. very hard. must use choke. now can oredi.

 

pipe: yamaha 3bs. NO fibre inside.

 

gear: 6 gears

 

block: y1 block (dont know if ported or mod or not)

 

piston bearings: loose but still can use according to mech and my dad. say its normal wear and tear for old bikes.

 

piston size: no idea

 

fuel consumption (mileage): 220km for 10litres

 

performance: bike stuck at 60km/h, requires full throttle for 3 secs or so on flat road before can go up to 80km/h and above smoothly.

 

fork: left fork oil leaking. suspect seal cap loose. thus handlebar now abit wobbly. whr to change? one side how much?

 

 

 

basically my bike now main problem is fuel consumption very high, and cannot speed and accelerate smoothly.. anyone and everyones help is very much appreciateD!!!!!!! thank you!

 

 

 

Try to do this yourself. When you got free time, open your carburator and replace your pilot jet needle jet. If possible all jettings so that you don't face jettings problem anymore. Pilot jet, Needle jet, Jet needle and main jet to original 1. Before you install the new jettings, get a carburator cleaner at any bike shop that sell or easiest place to find is at Mustafa Centre. Caution! Some carburator cleaner might do damage to some rubber parts in your carburator so, make sure you read the instructions carefully. Spray it into every hole you can find, especially the venturi hole. Leave it for a few minutes or so (depends on the instruction) and install the new jetting.

 

Loss of power due to loss of compressions. The possibilities are leakage in the gaskets, worn piston rings, wrong dimension while boring. CheckThe last piston size. The last size should be 200. If it is 200, then better get a new block. Or if it still below that, rebore to the next piston size and change new piston and rings together. All these may cause high fuel consumption also. Check your braking too. Make sure its not heavy when you try to push or move your bike back and forth. Sometime caliper pistons has no more lubrications and dosen't play. Service the braking system.

 

These are the possibilities of your high consumption problems. If all of the above are done and same problem persist, don't consult anymore mechanic. Roll your bike into the drain. Hahahaha..... Joking only!

 

[faris]

Originally posted by -SwQ-@Jan 1 2007, 05:16 AM

hey bros..where can I get my engine cover...kick starter...top block...chrome-ed? haha....thanks in advance k...

engine casing and top block i can do for you. but must leave at my void deck for 1 week if can got spare block and engine casing i can bring up stairs do for you contact me 98827840

[mat-vtech]

ajimey,nari bday kau per???kalau btul bday kau,aku wish kau happy bday..btw,bday yg ke brape nie?semoga dipanjangkan umur,dimurahkan rezeki dah semua yg baik2 utk kau..enjoy!!!

[shahrul_azmil3]

Originally posted by bloodybaguz@January 01, 2007 07:10 pm

normal outing pun nak kena tukar tayar mcm

nak gi touring kat thailand je hehehehehehehehe

if i take a pic of my tyres .... u could see repot2 ..... sign ..... sigh .....

[enolz]

Originally posted by mat-vtech@January 03, 2007 05:15 pm

ajimey,nari bday kau per???kalau btul bday kau,aku wish kau happy bday..btw,bday yg ke brape nie?semoga dipanjangkan umur,dimurahkan rezeki dah semua yg baik2 utk kau..enjoy!!!

 

whoa!!! slmt ari jadi ajimey.... moga2 dipanjangkan umur, murahkan rezeki, diberkati kehidupan ko nie.... ari jadi yg ke brapa nie?

[Ajimey]

Originally posted by mat-vtech+January 03, 2007 05:15 pm-->

QUOTE (mat-vtech @ January 03, 2007 05:15 pm)

ajimey,nari bday kau per???kalau btul bday kau,aku wish kau happy bday..btw,bday yg ke brape nie?semoga dipanjangkan umur,dimurahkan rezeki dah semua yg baik2 utk kau..enjoy!!![/b]

[Hyp3Soul]

Originally posted by Ajimey@January 04, 2007 03:09 am

Ya it was my berfdae... Tank U guys 4 noticing!

Its my 25th berdae... Tank U 4 all Ur well wishes!

Happy be lated b'day bro! Kawin jgn lupa jempot kita org! Haahahaha...

[Ajimey]

Originally posted by Hyp3Soul@January 06, 2007 12:06 am

Happy be lated b'day bro! Kawin jgn lupa jempot kita org! Haahahaha...

Tank U Joe!

[Honda_freakoz]

korg pat sini regular ke? aku ade bwk rxz jugak uh.. rxz nye seat bole potong mcm kr tk kasi latch dia tk senang bukak. ni untuk elak seat dibukak tanpa kunci...n pipe rxz pat sg observe bnylk tk legal.. chances of TP tngkp?? coz i got two pipes satu stock satu dh bikin nye.. n paintwork apa yg in trend skrg?? Sg ahboy ade jual tak rim sticker lining pat yg tep surface dia tu.. jadik bile wheels spinning ade nmpk lining dia pon spinning thnxx

[slaxz]

Yo bro.. long time never go in forum.. didn't know there're lots of rxzers here..

need to ask something.. anyone know y wen i corner or go straight my bike like goyang..especially the front tyre.. another thing my enginge sound rabak.. the 'keletek' sound quite loud.. anybody knows..

[bloodybaguz]

Originally posted by Ajimey@January 04, 2007 04:09 am

Ya it was my berfdae... Tank U guys 4 noticing!

Its my 25th berdae... Tank U 4 all Ur well wishes!

happi bdae bro

takde ape2 ke? hehehehehe

[bloodybaguz]

Originally posted by slaxz@January 06, 2007 12:56 pm

Yo bro.. long time never go in forum.. didn't know there're lots of rxzers here..

need to ask something.. anyone know y wen i corner or go straight my bike like goyang..especially the front tyre.. another thing my enginge sound rabak.. the 'keletek' sound quite loud.. anybody knows..

pls check ur tire pressure n cone bearing.

ur engine or block sound rabak?

[bloodybaguz]

Originally posted by Honda_freakoz@January 06, 2007 05:15 am

korg pat sini regular ke? aku ade bwk rxz jugak uh.. rxz nye seat bole potong mcm kr tk kasi latch dia tk senang bukak. ni untuk elak seat dibukak tanpa kunci...n pipe rxz pat sg observe bnylk tk legal.. chances of TP tngkp?? coz i got two pipes satu stock satu dh bikin nye.. n paintwork apa yg in trend skrg?? Sg ahboy ade jual tak rim sticker lining pat yg tep surface dia tu.. jadik bile wheels spinning ade nmpk lining dia pon spinning thnxx

abt ur seat im not too sure.

kalo takut si beruk tangkap pakailah yg stock.

sticker lining kao cari kedai yg jual sticker utk moto tak semestinye ah boi.

pasal paintwerk itu masing2 nye citrerasa.

[mat-vtech]

amacam lan,takde cerita per nari?ader ape2 plan picit ah..

[bloodybaguz]

13 Jan 2007, Saturday.

RnR at JB. Meet up: After Malaysia Chop Passport

Time: 1100pm

Interested can put name.(to the rest come join us dun be shy)

 

 

1) BloodyBaguz - 93676940

2) Adyra - 91556601

2) toofaz - 93807340

5)

6)

[bloodybaguz]

Originally posted by mat-vtech@January 06, 2007 07:59 pm

amacam lan,takde cerita per nari?ader ape2 plan picit ah..

takde citer ar jap lagi mao gi causeway point cari brg.

[mat-vtech]

13 Jan 2007, Saturday.

RnR at JB. Meet up: After Malaysia Chop Passport

Time: 1100pm

Interested can put name.(to the rest come join us dun be shy)

 

 

1) BloodyBaguz - 93676940

2) Adyra - 91556601

2) toofaz - 93807340

5) mamat-94275378

6)

 

 

nanti aku bawak camera ok so sapa2 nak posing pun ok..sat nie naik atas pokok makan per?

[bloodybaguz]

Originally posted by mat-vtech@January 06, 2007 08:22 pm

 

nanti aku bawak camera ok so sapa2 nak posing pun ok..sat nie naik atas pokok makan per?

tak tau pulak nanti kat kastam jb buleh discuss lagi ataz pokok ke

tempat biase ke tepi sungei ke dll.

[slaxz]

Originally posted by bloodybaguz@January 06, 2007 06:46 pm

pls check ur tire pressure n cone bearing.

ur engine or block sound rabak?

don't know much about bikes.. but i think the sound comes from block ah..

 

pasal goyang.. cone bearing baru tukar berapa bulan lepas .. tyre pressure ok.. kawan aku kata maybe rim nye bearing eh.. macam mana nak check ah.. betul blur..

[Ajimey]

Originally posted by bloodybaguz@January 06, 2007 06:44 pm

happi bdae bro

takde ape2 ke? hehehehehe

Ape cow nak Abg Lan?

[Ajimey]

Originally posted by slaxz@January 06, 2007 10:02 pm

don't know much about bikes.. but i think the sound comes from block ah..

 

pasal goyang.. cone bearing baru tukar berapa bulan lepas .. tyre pressure ok.. kawan aku kata maybe rim nye bearing eh.. macam mana nak check ah.. betul blur..

Anta la pegi kedai moto cek la Bro...

Ade banyak possibilities regarding e symptoms...

[Hyp3Soul]

Originally posted by slaxz@January 06, 2007 10:02 pm

don't know much about bikes.. but i think the sound comes from block ah..

 

pasal goyang.. cone bearing baru tukar berapa bulan lepas .. tyre pressure ok.. kawan aku kata maybe rim nye bearing eh.. macam mana nak check ah.. betul blur..

Kau main stand moto kau pastu goyang kiri kanan ar. Kalau goyang bearing kau ar dah jahanam.

 

Dis coming saturday join lah dorang punye outing boleh jugak dorang tengok2. Kalau untuk RXZ biasa lah ade bunyi punye...