Jump to content
SingaporeBikes.com Telegram Now LIVE! Join NOW for the Last Reviews, News, Promotions & Offers in Singapore! ×
  • Join SingaporeBikes.com today! Where Singapore Bikers Unite!

    Thank you for visiting SingaporeBikes.com - the largest website in Singapore dedicated to all things related to motorcycles and biking in general.

    Join us today as a member to enjoy all the features of the website for FREE such as:

    Registering is free and takes less than 30 seconds! Join us today to share information, discuss about your modifications, and ask questions about your bike in general.

    Thank you for being a part of SingaporeBikes.com!

Recommended Posts

Posted
kekawan, my bike very slow ah. my previous post no one reply :pity:, anyway its slow like very slow, not i want to make my bike go race, but sometime or most of the time even apek on vespa and rxk can kilas me.

 

on eway, i only do 60-70. 80 and above, my bike very noisy, and 80 is at rpm 7.5k.

 

is it because of my big tyre? but i see some people bigger tyre also faster.

i carry pillion, no pillion, same only, very heavy.

tyre pump every 2 days. chain oiled using diy chain oiler. once a month i clean.

sprocket is 15-38. carb serviced also same.

 

should be engine problem already? i want to go mech but scared later they ask this change this and that, i also bodoh bodoh just change, so i ask here first la.

 

help me friends...

 

ble last ko p service?? ko try full service dulu...c if there any change or not...aku pon aru full service n tukar spocket from 14-46 to 15-38...dulu 100km/h @ 8k rpm tap skr 6.5k rpm tap member aku ckp lau 15-38, 100km/h shub b between 5.5 - 6k rpm jek...mayb rpm meter aku rosak...

Sept' 08 - ??????? - HONDA NSR 150 SP (FU *** H)

 

Sept' 09 - Dec' 09 - HONDA NSR 150 SP (FR **** E)

 

Mar' 10 - ??????? - YAMAHA RXZ 135 (FS **** E)

 

**Gif image removed. please do not add a 6mb gif file into your sig as it slows everyone's surfing**

  • Replies 29.7k
  • Created
  • Last Reply

Top Posters In This Topic

Posted
ble last ko p service?? ko try full service dulu...c if there any change or not...aku pon aru full service n tukar spocket from 14-46 to 15-38...dulu 100km/h @ 8k rpm tap skr 6.5k rpm tap member aku ckp lau 15-38, 100km/h shub b between 5.5 - 6k rpm jek...mayb rpm meter aku rosak...

service carb je ada. full service tu drg buat ape actually? and roughly brapa aku kene save?

 

nak ckp rpm aku rosak pon taktau eh, psl makin laju makin rabak bunyi mtor, kalau tak bising sgt mungkin aku boleh ckp la rpm aku rosak..

Posted

bout $60 @ amk...lau kene rebore, play safe $150 cukop...aku full service n change spocket kene $100 jek...

Sept' 08 - ??????? - HONDA NSR 150 SP (FU *** H)

 

Sept' 09 - Dec' 09 - HONDA NSR 150 SP (FR **** E)

 

Mar' 10 - ??????? - YAMAHA RXZ 135 (FS **** E)

 

**Gif image removed. please do not add a 6mb gif file into your sig as it slows everyone's surfing**

Posted
bout $60 @ amk...lau kene rebore, play safe $150 cukop...aku full service n change spocket kene $100 jek...

 

ajak die g tmpt tu ah danny..the one man half naked apek shop

Posted
kekawan, my bike very slow ah. my previous post no one reply :pity:, anyway its slow like very slow, not i want to make my bike go race, but sometime or most of the time even apek on vespa and rxk can kilas me.

 

on eway, i only do 60-70. 80 and above, my bike very noisy, and 80 is at rpm 7.5k.

 

is it because of my big tyre? but i see some people bigger tyre also faster.

i carry pillion, no pillion, same only, very heavy.

tyre pump every 2 days. chain oiled using diy chain oiler. once a month i clean.

sprocket is 15-38. carb serviced also same.

 

should be engine problem already? i want to go mech but scared later they ask this change this and that, i also bodoh bodoh just change, so i ask here first la.

 

help me friends...

 

bro, your bike have the same problem as mine..i want to go service too but don't know how much the price..scared expensive lar..skali pergi tk cukup duit abz uh gini..jejak 90km/h already at 6.5 rpm..

http://oi44.tinypic.com/2lkemax.jpg?ref=nf
Posted
bro, your bike have the same problem as mine..i want to go service too but don't know how much the price..scared expensive lar..skali pergi tk cukup duit abz uh gini..jejak 90km/h already at 6.5 rpm..

 

atleast yours can jejak 90. maybe thurs i going down and survey for the pricing..

Posted
atleast yours can jejak 90. maybe thurs i going down and survey for the pricing..

 

update me the price bro..i'm going this coming month if the price is cheap cheap..

http://oi44.tinypic.com/2lkemax.jpg?ref=nf
Posted

bros how to check alignment???i dunno if my alignment lari or tk..cos when i ride ade this swaying effect..haha..dont know wheter its my bike or my brain playing tricks on me lah...(at amk full service cost $55 and if rebore is needed cost $125 je..(for nosey and izzammo))

Posted (edited)
bros how to check alignment???i dunno if my alignment lari or tk..cos when i ride ade this swaying effect..haha..dont know wheter its my bike or my brain playing tricks on me lah...(at amk full service cost $55 and if rebore is needed cost $125 je..(for nosey and izzammo))

 

thanks alep20 for the price quote..what is included in the full service bro?and what is the name of the shop?

Edited by nosey
http://oi44.tinypic.com/2lkemax.jpg?ref=nf
Posted

ade sesape bro willing to organise RX-Z MEGAMEET UP?

Class 2B - 16 Mar 09 (1st attempt)

Class 2A - 24 Aug 10 (1st attempt)

Class 3C - in the process

KRR(Monster Energy) - 25 Mar 09 till 18 Sep 09 FBB1825X (Memories... Alice)

KRR(Emma) - 19 Sep 09 till 25 Mar 10 FT2361T

RX-Z(Mia) - 17 Mar 10 till 17 Dec 11

KRR(Narnia) - 24 Dec 11 till forever and ever untill when when

Posted
atleast yours can jejak 90. maybe thurs i going down and survey for the pricing..

 

Hi bro,aku dulu bawak rxz.Tapi sekarang da tk.Aku jugak la aku sal rxz.

 

1) Kau bawak motor jejak 80km/h,rpm kau 6.5 tapi kau nye motor gegar tk?

 

a) Kalau dier gegar terok ader byk reason asal...First,pipe kau berat.Penuh ngan carbon. Angin tk leh kuar ngan betul.So in turn kau nye piston goyang.Tu menyebabkn motor vibrate.

 

b) 2nd reason takot crankshaft kau da terempit sangat ngan housing kau.Pelan2 kau nye housing makan,motor kau vibrate n bising mcm nk roboh.

 

c) Third,Kalau motor kau tk leh pegi takot setting carb kau besar sgt.spocket kau besar.Tu yg buat motor pick up kau kuat tapi distance mau rabak.

 

d) Kau boleh antar motor g full service.Tapi tk byk kedai motor amik kesah asal motor kau tk leh pegi.Drg tau drg servicekn kau motor kau mcm motor rxz lain. Cari kedai betol2.Tanye members kau ader yg recommend tak.

Posted
bros how to check alignment???i dunno if my alignment lari or tk..cos when i ride ade this swaying effect..haha..dont know wheter its my bike or my brain playing tricks on me lah...(at amk full service cost $55 and if rebore is needed cost $125 je..(for nosey and izzammo))

 

4 me alignment does nt effect swaying... most probaly ur cone bearing area ,fork bracket the black colour which they call T... i dont knw hw to say or call it... or may b ur body dah lari...

StAndaRd iS tHe bEsT

Posted
update me the price bro..i'm going this coming month if the price is cheap cheap..

anyway i not going jb, surveying locally je, maklum takde passport.

 

bros how to check alignment???i dunno if my alignment lari or tk..cos when i ride ade this swaying effect..haha..dont know wheter its my bike or my brain playing tricks on me lah...(at amk full service cost $55 and if rebore is needed cost $125 je..(for nosey and izzammo))

i also got the swaying effect, can feel in especially in the front.

Hi bro,aku dulu bawak rxz.Tapi sekarang da tk.Aku jugak la aku sal rxz.

 

1) Kau bawak motor jejak 80km/h,rpm kau 6.5 tapi kau nye motor gegar tk?

 

a) Kalau dier gegar terok ader byk reason asal...First,pipe kau berat.Penuh ngan carbon. Angin tk leh kuar ngan betul.So in turn kau nye piston goyang.Tu menyebabkn motor vibrate.

 

b) 2nd reason takot crankshaft kau da terempit sangat ngan housing kau.Pelan2 kau nye housing makan,motor kau vibrate n bising mcm nk roboh.

 

c) Third,Kalau motor kau tk leh pegi takot setting carb kau besar sgt.spocket kau besar.Tu yg buat motor pick up kau kuat tapi distance mau rabak.

 

d) Kau boleh antar motor g full service.Tapi tk byk kedai motor amik kesah asal motor kau tk leh pegi.Drg tau drg servicekn kau motor kau mcm motor rxz lain. Cari kedai betol2.Tanye members kau ader yg recommend tak.

 

1)80kmh at 7.5 rpm bkn 6.5. anyway gegar tu tak lah teruk. gegaran biasa je.

 

a)pipe berat, mungkin juga, kekadang rasa nye mcm nak wack all the way, mcm pipe tersumbat, rimas bro. and mana nak decarbonize locally?

 

b)crankshaft tu ape? haha.

 

c)zaman spocket besar, pick up tak kuat, distance takde. da tukar kecik, pick up tak kuat, distance masih takde. atleast rpm turun la juga. carb setting pon kedai apek biasa anuhkan.

 

d)da tny members, tapi ramai da upgrade motor besar, zaman drg bawa rxz sume pegi kedai apek biasa yg aku kekadang singgah juga la. aku taknak buat motor aku pegi ala racing, atleast boleh kejar pakcik2 dan apek2 yg kat expressway da syukur. haha.

 

4 me alignment does nt effect swaying... most probaly ur cone bearing area ,fork bracket the black colour which they call T... i dont knw hw to say or call it... or may b ur body dah lari...

 

cone bearing is the one that can be tightened eh? but my swaying effect feels especially obvious when i pillion, if not not so bad..

Posted

hi all,

 

any of you know which shop does a good fork seal change on my rxz? just found out it leaking like hell...

also if you can advise me the cost / pricing that would be good too

 

thanks in advance

take me to georgia

Posted
anyway i not going jb, surveying locally je, maklum takde passport

 

 

i'm not going jb too coz takot nk pergi uh:cheeky: are you going to survey the place at amk that alep20 just quote the price about the full service?

http://oi44.tinypic.com/2lkemax.jpg?ref=nf
Posted

does super 4 mirror able to fix onto rxz bike?

..................

Posted
hi all,

 

any of you know which shop does a good fork seal change on my rxz? just found out it leaking like hell...

also if you can advise me the cost / pricing that would be good too

 

thanks in advance

Bro,if your fork leaking,i suggest u just change the whole fork.Cos once it start to leak,no matter how u repair them,it will still leak again.This is very common problem for RXZ as i come across the thread somewhere in this forum.Changing to 2nd hand original fork is good enough.Lately theres a few riders selling their RXZ stuff in the garage sales section, maybe u can check it out.I also find it very tempting to buy but too bad, budget constraint to the max liao.Cheers for RXZ bro..

Its not how fast you can reach your destination and its not how you modify your machine but at the end of the day, its HOW you ride the machine!!!!.

Posted

Bro just some opinion,You change sprocket size 38 doesnt mean automatically your bike smooth oon high speed.You need to know your bike engine,Boleh angkat tak sprocket kecik.Lagi satu RXZ common wear n tear if you like to rempit always,Piston ring,Con-rod,2T pump kecik tak?Abih lu whack 130 takkan 2T kecik bro at least mau setting dekat setengah thread.2T jgn lokek pakai fully synthetic low smoke,Engine oil semi dah okay.Apa2 brg mcm sprocket,Pipe,Jetting semua nak kena tune angin balik.Skrg gua pakai 15/42 100kmh rpm 6.5,Pinjam member nyer Faito 415 15/39 100kmh rpm baru nak cecah 6 tapi lu pikir balik kat Singapore ni memadai ke pakai sprocket size 38 kebawah?Lu rembat 130kmh kat highway pas tu pikiran ade speed trap tak saman ke.Pada gua combination 16/39 atau 15/40 dah cukup makan kat SG ni unless lu ulang alik JB.tERUS TERANG gua ckp kedai kat lor bapuk tu tak semua pandai setting angin.Lu try carik bdk kampung yang ade kenalan mechanic bwh pokok.Diorang nyer setting ade baik sikit.Lagi satu faktor rantai,Kalau size besar pun tak bagus sebab enjin kecik rantai besar mana ade ummph?Pakai size 415 dah ok color lu punya suka nak gold ke,biru ke.Gua ade satu kwn pakai racing boy 8 batang 18 inci depan 80/80 dunlop TT900 blakang 90/90 tapi lari mcm pelesit gak.

Klass 2,3,4 i shiny Professional'noye litsenziya

 

1993:Class 2B-Yamaha RXK/RXZ/TZR125RR/SDR200/WR200-Aprilia RS125R-Kawasaki KRR150ZX(Former)

2000:Class 3-Honda Civic 1.6esi(Former)Proton Exora 1.6Turbo(Current)

2004:Bus Driver Vocational License

2009:Class 4

2011:Class 2A-Aprilia RS250-Honda CB400SF PB1-KTM250EXC(Former)Yamaha XJR400R(Current)

2013:Class 2-Suzuki B-King 1300(Former)

Posted
pass tu, pass jugak ar tap anak tu, anak tu mau ingat...hahaha....

 

wah! nk bukak game pe?? nk join! join tengok jek...

 

Alahhh... Stakat nak jumpe, suruh dia joget mcm gitu depan aku aje. Tak sentuh pon! Lol... :p

 

kekawan, my bike very slow ah. my previous post no one reply :pity:, anyway its slow like very slow, not i want to make my bike go race, but sometime or most of the time even apek on vespa and rxk can kilas me.

 

on eway, i only do 60-70. 80 and above, my bike very noisy, and 80 is at rpm 7.5k.

 

is it because of my big tyre? but i see some people bigger tyre also faster.

i carry pillion, no pillion, same only, very heavy.

tyre pump every 2 days. chain oiled using diy chain oiler. once a month i clean.

sprocket is 15-38. carb serviced also same.

 

should be engine problem already? i want to go mech but scared later they ask this change this and that, i also bodoh bodoh just change, so i ask here first la.

 

help me friends...

 

Take it a step at a time bro, jgn stress. But wat I can see frm ur specs, ur big tyre and ur small rear sprocket doesn't gum well. Diff RXZ, diff performance, u can't expect them to be all the same. Since u serviced ur carb alrdy, check the sound and vibs of ur bike, u don't noe wat might be going on in there. By tis, I meant ur block, piston, piston rings; any calar, wear and tear on these thing might lead to poor combustion = power gone. If tats all fine and well, u might wanna hav a last look at ur pipe before going for the all expensive overhauling... Hope tis helps... :thumb:

 

bro the custom throttle can fit on rxz ah?

 

Cannot...

 

bros how to check alignment???i dunno if my alignment lari or tk..cos when i ride ade this swaying effect..haha..dont know wheter its my bike or my brain playing tricks on me lah...(at amk full service cost $55 and if rebore is needed cost $125 je..(for nosey and izzammo))

 

Swaying effect eh? Try to shake ur tyre side to side. If wobble I guess ur bearing or seal or ur hub even are busted. Wat type of rim/tyre ur using bro? Coz I only experience tis "swaying" effect wen using my wife's 18" tayar sotong on aluminium lidi rim...o_O

 

ade sesape bro willing to organise RX-Z MEGAMEET UP?

 

Entah ehk? Mayb after my KL trip I organise one lah...

 

hi all,

 

any of you know which shop does a good fork seal change on my rxz? just found out it leaking like hell...

also if you can advise me the cost / pricing that would be good too

 

thanks in advance

 

Any good, well established bike shop in S'pore will do bro... Price wise not sure coz never change in Spore before. Sorry...:thumb:

 

does super 4 mirror able to fix onto rxz bike?

 

Cannot, diff thread...

 

Bro,if your fork leaking,i suggest u just change the whole fork.Cos once it start to leak,no matter how u repair them,it will still leak again.This is very common problem for RXZ as i come across the thread somewhere in this forum.Changing to 2nd hand original fork is good enough.Lately theres a few riders selling their RXZ stuff in the garage sales section, maybe u can check it out.I also find it very tempting to buy but too bad, budget constraint to the max liao.Cheers for RXZ bro..

 

Not advisable. Wat if the 2nd hand fork leaks the next day? It's back to square one...:thumb:

 

Bro just some opinion,You change sprocket size 38 doesnt mean automatically your bike smooth oon high speed.You need to know your bike engine,Boleh angkat tak sprocket kecik.Lagi satu RXZ common wear n tear if you like to rempit always,Piston ring,Con-rod,2T pump kecik tak?Abih lu whack 130 takkan 2T kecik bro at least mau setting dekat setengah thread.2T jgn lokek pakai fully synthetic low smoke,Engine oil semi dah okay.Apa2 brg mcm sprocket,Pipe,Jetting semua nak kena tune angin balik.Skrg gua pakai 15/42 100kmh rpm 6.5,Pinjam member nyer Faito 415 15/39 100kmh rpm baru nak cecah 6 tapi lu pikir balik kat Singapore ni memadai ke pakai sprocket size 38 kebawah?Lu rembat 130kmh kat highway pas tu pikiran ade speed trap tak saman ke.Pada gua combination 16/39 atau 15/40 dah cukup makan kat SG ni unless lu ulang alik JB.tERUS TERANG gua ckp kedai kat lor bapuk tu tak semua pandai setting angin.Lu try carik bdk kampung yang ade kenalan mechanic bwh pokok.Diorang nyer setting ade baik sikit.Lagi satu faktor rantai,Kalau size besar pun tak bagus sebab enjin kecik rantai besar mana ade ummph?Pakai size 415 dah ok color lu punya suka nak gold ke,biru ke.Gua ade satu kwn pakai racing boy 8 batang 18 inci depan 80/80 dunlop TT900 blakang 90/90 tapi lari mcm pelesit gak.

 

FUH!!! Mat Rempz talking sak!!!:cheeky:

http://i330.photobucket.com/albums/l417/syamitomo/GroupPhotoMain1.jpg

Posted
bro the custom throttle can fit on rxz ah?

 

yup...i msg the guy before n he say it cn be done...

 

wah mcm best je naked2, kat mana ni?

 

update me the price bro..i'm going this coming month if the price is cheap cheap..

 

if u wanna go, tell me...ill bring u...

 

ade sesape bro willing to organise RX-Z MEGAMEET UP?

 

tkya tanye sape2...ko organise je ar...jgn malu2...haha...

 

hahaha . aku saje2 jek nk try . btw, kau tinggal yishun sblah maner ? aku pon tinggal yishun gak . hahahaha

 

pt chong pang...ko tgl ane??

 

 

 

 

Cannot...

 

Entah ehk? Mayb after my KL trip I organise one lah...

 

asl lak tkle akai custom fast throttle 2??

btw, ble ko alek dari jb??

Sept' 08 - ??????? - HONDA NSR 150 SP (FU *** H)

 

Sept' 09 - Dec' 09 - HONDA NSR 150 SP (FR **** E)

 

Mar' 10 - ??????? - YAMAHA RXZ 135 (FS **** E)

 

**Gif image removed. please do not add a 6mb gif file into your sig as it slows everyone's surfing**

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • DAIS_ShellBAU2024_Motorcycle_SingaporeBikesBanner_300x250.jpg

     
×
×
  • Create New...