CBR150R Riders, Join us now!

[d0n]

anyone keen to go visit stanly @ the hospital?

[xXxRatedxXx]

anyone keen to go visit stanly @ the hospital?

 

Me. 10 char. 96440355

[xXxRatedxXx]

Anyone using aftermarket exhaust? Any comment? What brand? Which shop? Price?

Thanks in advance..

 

NO. No comment, all brand illegal one la. No shop selling. JB $50 can buy tebok pipe already or you DIY tebok yourself.... silencer knock a few holes.

[krocozkid]

Done washing carb and flushing engine and flushing rad. But 1 thing is that jz nw, im travelling frm sim at clementi to jb, the engine temp is around half minus abit. Izit normal? Thx

[xbfish]

anyone keen to go visit stanly @ the hospital?

 

yo bro. what happen to stanley?

[xXxRatedxXx]

yo bro. what happen to stanley?

 

accident illegal turn then whack into stanley... quite jialat.

[xXxRatedxXx]

http://www.forumspile.com/Cliche-Double_post.jpg Edited October 26, 2011 by xXxRatedxXx
everytime forum lag then double post la nbcb.

[xXxRatedxXx]

Done washing carb and flushing engine and flushing rad. But 1 thing is that jz nw, im travelling frm sim at clementi to jb, the engine temp is around half minus abit. Izit normal? Thx

 

Did you factor in the weather conditions? Hot? Cold? Start stop traffic? Its normal la.

[d0n]

Chris & I will be heading down to visit Stanley at NUH today 12-1pm. Those who are keen to join can meet us there directly. =)

[krocozkid]

Did you factor in the weather conditions? Hot? Cold? Start stop traffic? Its normal la.

 

i recall, its quite cold though. in front of sim tht time is hot, then go bke got slight rain. hmmm. mayb i will monitor it again and see how. btw should i change my cone bearing? cause uncle lim said 10k km he changed everything, now alrdy 30k++ abit.

[kojakm4]

NO. No comment, all brand illegal one la. No shop selling. JB $50 can buy tebok pipe already or you DIY tebok yourself.... silencer knock a few holes.

 

Oooppps! I mean legal one's, so far only found 1, leo vince, abt $900..

Already used illegal one  super loud!! Always activated neighbour car & house alarm! Now only use when going in law house in mersing.

[kojakm4]

anyone keen to go visit stanly @ the hospital?

 

Sorry donno Stanly..

Anyway, pray & hope he recover soon..

Edited October 26, 2011 by kojakm4
wrong spelling

[tomdickharry]

hi cbr rider, may i knw where can i do some cosmetic mod to make my bike looks nicer n sporty??? like change brake & clutch levers, footpeg. Also e grip at e pillion seat can it be taken out???

[xXxRatedxXx]

hi cbr rider, may i knw where can i do some cosmetic mod to make my bike looks nicer n sporty??? like change brake & clutch levers, footpeg. Also e grip at e pillion seat can it be taken out???

 

ah gua lane.

[d0n]

i recall, its quite cold though. in front of sim tht time is hot, then go bke got slight rain. hmmm. mayb i will monitor it again and see how. btw should i change my cone bearing? cause uncle lim said 10k km he changed everything, now alrdy 30k++ abit.

 

if the cone still works well, i.e. can turn the handlebar left and right without any kinks, then why change it?

i think it is normal for the bike temp to fluctuate between 1/4 to 3/4.

 

hi cbr rider, may i knw where can i do some cosmetic mod to make my bike looks nicer n sporty??? like change brake & clutch levers, footpeg. Also e grip at e pillion seat can it be taken out???

 

for levers, u can try yr luck to see if those for NSR150 or Honda Wave or fit. if not, some modifications to the aftermarket levers may be required.

same apply for footpegs. i've got yamaha r6 a-like ones (non-OEM) fitted on mine when in JB.

 

as for pillion grip, no problem. just got to make sure that there are no ugly marks left behind at the mounting points. mine has some chipped off paint visible, so i'm keeping the grip bar on.

[krocozkid]

if the cone still works well, i.e. can turn the handlebar left and right without any kinks, then why change it?

i think it is normal for the bike temp to fluctuate between 1/4 to 3/4.

 

yupps, i think i turned left and right w/p any kinks. anyway i monitored the temps, still manageable though. haha.

btw bro don, is there anything i could do to soften my throttle and my clutch lever??

[tomdickharry]

ah gua lane.

 

deskar?? cheong aik ah???

[kaze-no-koe]

http://japan.webike.net/products/1830437.html

anyone interested to get tis sweet tail?

[xXxRatedxXx]

deskar?? cheong aik ah???

 

JB la dude.

[tomdickharry]

JB la dude.

 

X-rated bro, i m nt familiar wif JB lar...so dun wanna take e risk.... =)

[d0n]

yupps, i think i turned left and right w/p any kinks. anyway i monitored the temps, still manageable though. haha.

btw bro don, is there anything i could do to soften my throttle and my clutch lever??

 

for throttle cable, not much can be done unless u r prepared to modify some spring mechanism thing in the carburetor, which is abit too much to do i feel.

for clutch cable, u can adjust the freeplay adjusting nut just next to the clutch lever. take note of the existing setting, then proceed to play around with the adjustment. worse come to worse, revert back to the existing freeplay setting if u dont like the new settings. do note that this will affect your clutch freeplay in addition to making the clutch softer/harder.

 

http://japan.webike.net/products/1830437.html

anyone interested to get tis sweet tail?

 

USD$209....

[xbfish]

my bike number open 2nd prize! But i never buy! :faint: :faint:

[xXxRatedxXx]

X-rated bro, i m nt familiar wif JB lar...so dun wanna take e risk.... =)

 

Pls see my signature.

[tomdickharry]

Pls see my signature.

 

oh so sorry den...

[krocozkid]

for throttle cable, not much can be done unless u r prepared to modify some spring mechanism thing in the carburetor, which is abit too much to do i feel.

for clutch cable, u can adjust the freeplay adjusting nut just next to the clutch lever. take note of the existing setting, then proceed to play around with the adjustment. worse come to worse, revert back to the existing freeplay setting if u dont like the new settings. do note that this will affect your clutch freeplay in addition to making the clutch softer/harder.

 

okok i will try. thanks for the tips!!really appreciate it =)