CBR150R Riders, Join us now!

[limbat]

DIY .................. any one ??

[collectees]

  limbat said:

DIY .................. any one ??

 

my suggestion to this is using the 3M heavy duty double sided tape to stick on to rear under tray, then wire to a switch in the front connected to the battery. job time: 15 minutes.

 

and there will be people doubting 3M heavy duty double sided tape. all i can say that my rear number plate is stuck on using this tape. after 1+ year, rain + shine, buang and low side, it's still stuck!

[collectees]

The next entry for my school's blog is up!

 

I need your help writing some feedback in the comments section so I can get a good grade, so please take a quick read here and share your thoughts in the comments section!

[holugyi]

ZED.!!..

 

I wld like to know about Defensive Riding lesson. Can u tell me about this or Pls guide to me any link.. tks a lot

[collectees]

  holugyi said:

ZED.!!..

 

I wld like to know about Defensive Riding lesson. Can u tell me about this or Pls guide to me any link.. tks a lot

 

me and David took ours at BBDC. your nearby driving centre probably has a similar course. cost: $50 + government profit for a half day course.

 

David sure had fun. he whacked the hell out of the BBDC bikes.

[milktm]

anyone can recommend me currently which shop have the lowest 1st hand cbr 150 for sales? n how much would it be??

[whitefang]

hey ethan i love ur bike but sorry got no money to pay u.. haha.. unless u can get a bike shop to take mine to pay u, then i pay them in installments.. (which is usually quite high priced for me, so bo hua).. =)

 

thanks david, for the kind words..

 

anyway i went to my mech on fri, and they changed to a made in thailand tyre for me, cos they have no more BT liao.. for $75 before government tax.

 

I couldnt go anywhere anymore, so had to change it lor..

 

sian.. my tyres are still very new leh. oh yah, the problem was tyre punctured, by a screw stuck in it. there were two holes in total, one had a screw and the other was just a hole.

 

either way, it was a bad start to my first day of being 26. -.-"

[Red_Devils]

  whitefang said:

hey ethan i love ur bike but sorry got no money to pay u.. haha.. unless u can get a bike shop to take mine to pay u, then i pay them in installments.. (which is usually quite high priced for me, so bo hua).. =)

 

thanks david, for the kind words..

 

anyway i went to my mech on fri, and they changed to a made in thailand tyre for me, cos they have no more BT liao.. for $75 before government tax.

 

I couldnt go anywhere anymore, so had to change it lor..

 

sian.. my tyres are still very new leh. oh yah, the problem was tyre punctured, by a screw stuck in it. there were two holes in total, one had a screw and the other was just a hole.

 

either way, it was a bad start to my first day of being 26. -.-"

 

Hey, happy be lated birthday. U should have told us earlier, so we can hang out together.

 

Y Thailand made tyre so expensive? U came along with me to change my rear tyre, so u should know the current market price for tyre what. Y u din go to other shop?

[Red_Devils]

  milktm said:

anyone can recommend me currently which shop have the lowest 1st hand cbr 150 for sales? n how much would it be??

 

As what I know, bike production provide one of the best deal in town. If u dont mind second hand, our friend going to sell his bike, u can get the details just few posts earlier. FBB plate year 2007.

[collectees]

  whitefang said:

either way, it was a bad start to my first day of being 26. -.-"

 

ooh! Happy belated Birthday Shaun!

[milktm]

  Red_Devils said:

As what I know, bike production provide one of the best deal in town. If u dont mind second hand, our friend going to sell his bike, u can get the details just few posts earlier. FBB plate year 2007.

 

thanks for the info! but i prefer to get 1st hand. how much does bike production quote for machine price ah? currently im a p-plate and 20yrs old. how much do u guys think they will quote mi otr oso?

[Red_Devils]

  milktm said:

thanks for the info! but i prefer to get 1st hand. how much does bike production quote for machine price ah? currently im a p-plate and 20yrs old. how much do u guys think they will quote mi otr oso?

 

None of us getting new CBR recently. Y not u call them to check & update the price for us?

 

Btw, y u want to change bike?

[milktm]

im tired of paying for the petrol for my krr. now NS the pay is so pathetic! so decided to downgrade to some bike tat have low fuel consumption. how much does cbr 150r can go for a full tank travelling at 90-100km/h ??

[ethanleeqh]

haha might not be selling. cant find any suitable cbr400. anyway i wanna ask the pros here, is the sp rear footrest suitable for our bikes?

[collectees]

  milktm said:

im tired of paying for the petrol for my krr. now NS the pay is so pathetic! so decided to downgrade to some bike tat have low fuel consumption. how much does cbr 150r can go for a full tank travelling at 90-100km/h ??

 

er... how is getting a more cost effective, less maintenance bike considered as downgrading?

[limbat]

  collectees said:

my suggestion to this is using the 3M heavy duty double sided tape to stick on to rear under tray, then wire to a switch in the front connected to the battery. job time: 15 minutes.

 

and there will be people doubting 3M heavy duty double sided tape. all i can say that my rear number plate is stuck on using this tape. after 1+ year, rain + shine, buang and low side, it's still stuck!

 

I will test out the LED tube 1st & keep u guys informed .............

[milktm]

  collectees said:

er... how is getting a more cost effective, less maintenance bike considered as downgrading?

 

well, coz my NS life still quite long so i need a transport which can last long for mi. for long term kr gonna drain my $$ faster alot.. haha..

[d0n]

  milktm said:

well, coz my NS life still quite long so i need a transport which can last long for mi. for long term kr gonna drain my $$ faster alot.. haha..

 

just curious, how much distance do u usually cover a month?

does the difference in petrol cost justify the amt of money u need to topup for a 1st hand cbr150?

[collectees]

  d0n^ said:

just curious, how much distance do u usually cover a month?

does the difference in petrol cost justify the amt of money u need to topup for a 1st hand cbr150?

 

short term costs VS long term gains. very clever, my friend.

 

better go write something intelligent on my blog! =P

[Cpt.ZR]

  milktm said:

well, coz my NS life still quite long so i need a transport which can last long for mi. for long term kr gonna drain my $$ faster alot.. haha..

 

Is your bike under COI? and also, try riding abit mroe gentle lor.. cos if u buy new CBR i can easily tel u its gg to be 7K or more. I got a colleage got an FBC plate CBR. 150 7k... when he buy..

 

 

Since u NS already.. somemore peanuts pay.. why not dont change bike to add on the burden of yer pocket, but, change the way you are riding.. Cos i believe monthly petrol fees wont be as much as the monthly installments u are paying to bike shops.

 

Also.. If your Krr monthly petrol is $80 and no more COI, then you chg to CBR.. monthly petrol is 50 bucks, you save 30 bucks, BUT.. COI 150/ month.. so u LL pay about 200 bucks.. end up wasting more $$ neh..

 

 

well that is at least what i thinking.. dont flame me..

[whitefang]

thanks boys, for the nice wishes.

 

well yeah, my tyre cannot go until so far already lah, so that's why never go LAB to buy tyre and wait to change lor.. i wish i had more time at my disposal, but there were many plans on that day.. haha.. oh well..

 

i did mention to him also, that i can get japan-made tyres at that price elsewhere, and he said that he knows, but he cant help it cos shops like LAB gets their stuff directly, that's why cheaper, while he orders from someone else (like a middleman) so that's why he has to charge at this price.. *shrug*

[Cpt.ZR]

  whitefang said:

thanks boys, for the nice wishes.

 

well yeah, my tyre cannot go until so far already lah, so that's why never go LAB to buy tyre and wait to change lor.. i wish i had more time at my disposal, but there were many plans on that day.. haha.. oh well..

 

i did mention to him also, that i can get japan-made tyres at that price elsewhere, and he said that he knows, but he cant help it cos shops like LAB gets their stuff directly, that's why cheaper, while he orders from someone else (like a middleman) so that's why he has to charge at this price.. *shrug*

 

 

 

hahaha nvm le la.. money comes later.. safety comes first.. without you being safe money can never be earned back..

[Red_Devils]

  whitefang said:

thanks boys, for the nice wishes.

 

well yeah, my tyre cannot go until so far already lah, so that's why never go LAB to buy tyre and wait to change lor.. i wish i had more time at my disposal, but there were many plans on that day.. haha.. oh well..

 

i did mention to him also, that i can get japan-made tyres at that price elsewhere, and he said that he knows, but he cant help it cos shops like LAB gets their stuff directly, that's why cheaper, while he orders from someone else (like a middleman) so that's why he has to charge at this price.. *shrug*

 

No choice if that was the case. Anyway, read from somewhere said that Thailand made tyre wont last longer than Japan made tyre. So bear with it for half a year maybe, then get it changed.

 

  Cpt.ZR said:

hahaha nvm le la.. money comes later.. safety comes first.. without you being safe money can never be earned back..

 

Yeah, right. Safety come first, money can be earned later on.

[Kenneth.C]

Hi again everyone! Tmr's my last paper. LAST. LAST LAST !!!!!

[lazy1000]

  whitefang said:

thanks boys, for the nice wishes.

 

well yeah, my tyre cannot go until so far already lah, so that's why never go LAB to buy tyre and wait to change lor.. i wish i had more time at my disposal, but there were many plans on that day.. haha.. oh well..

 

i did mention to him also, that i can get japan-made tyres at that price elsewhere, and he said that he knows, but he cant help it cos shops like LAB gets their stuff directly, that's why cheaper, while he orders from someone else (like a middleman) so that's why he has to charge at this price.. *shrug*

 

hey shaun, sorry im a bit late but still...

Happy Belated Birthday!!!